Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
Hi Everyone,
Been using the H100 since November 2011 and didn't have problems until recently. The unit has been making hissing sounds, and I found that when i tap the hose, it will sometimes buzz loudly. See video for example. Anyone else experience this problem? Should I contact Corsair...
Cost me $6.88 to ship to Southern California. I also had some fan wire extensions, so you can probably shave a few cents off of that.
BTW, SVC is great...ordered on the 23rd, received on the 25th. = )
So I booted my computer one day and found something very odd. Rivatuner & Everest reports the GPU clocks at...
Core clock / geometric domain: 275.40 MHz
Core clock / shader domain: 275.40 MHz
Core clock / ROP domain: 275.40 MHz
Memory Clock: 405.00 MHz.
Default clocks for this...
I personally like Lavalys Everest Ultimate Edition. It can monitor both CPU and GPU temps and is pretty consistent with Speedfan and Coretemp. Also, you can configure it to display on Windows Vista Gadgets for real-time monitoring. For Example...
how are you getting such amazing temps?
Been using the GeminII with 2x 2200RPM Yate Loon's @88CFM and I can't even come close with my E6600. = /
Quite honestly, my old Hyper 6+ did a better job, but I'm willing to sacrifice a few degrees to cool more real estate.
I'm noticing that there's about a 3-4 degree difference in CPU temps when I have my case side panel on vs the case side panel off. So my best guess is that there isn't enough air being fed into the two 120mm Yate Loons @47cfm.
So my main concern is, since there is only one fan opening on my...
Here's some common problems with this motherboard that I have either experienced..or just read about.
Any bios after 7.1 does not allow you to operate the Jmicron controller alongside with the Intel Matrix controller.
Any bios after 7.1 has incorrect RAM timing readings. 4-4-4-12 will...
Is it two dogs, or just one and a reflection? It/they sorta looks like a beaver. :D
There should be a new thread...we'll call it. "Show me your rig next to your pets!"
Make sure your hard drives are both connected to the purple SATA ports. For example, my Raid 0 HD's are in ports 1&2
I take it you are unable to create the Raid array using cntrl+i?
If you are using Bios 7.1...
- Enter Integrated Peripherals
- Set Onboard JMB361 to [IDE]
- Enter Sata...
Dunno how good the specs are, but it's worked well for me. The price is certainly something to consider.
P.S. Has the most annoying beeping sounds, but can be remedied with some tape and a few minutes time.
http://www.svc.com/ald-v03-us.html
You can try dropping the "FSB & Memory Clock Ratio" to 1:1 or 1:1.25. I know it's sucks not being able to utilize ur RAM to it's rated speed, but if it'll solve your problem, it might not be such a bad compromise.
here's a link to bios 7.16
http://free-ri.t-com.hr/zbrnelic/
I'm not an expert in Virtualization Technology, I'm just going with other's suggestions. For the most part, I know it's used to enable multiple operating systems in the same machine. Whether it is on or off, I'm sure it won't make a...