Because I can't leave well enough alone; Anyone have a 980Ti 6GB for around $50? I'd rather get one from a board member than off Ebay that has been flogged to death in a mining rig no doubt. Reason for 9 series is last supported Nvidia card for WinXP 32 bit (retro gaming box) and even then have to modify the INF file.
Update below.
I'm still thinking about this but hit a snag on my end. The CPU upgrade from 2.8 ghz -> 3.4 ghz did not work. The motherboard either has a voltage regulator that is borderline for the 125w cpu or Gigabyte is incorrect about motherboard & bios support of the 3.4 ghz unit. Same Deneb core as 2.8 and 3.0 only difference is wattage.
When you install the 3.4ghz cpu, it runs at 403 mhz! The error flag is set so it defaults to minimum speed, motherboard sensor reports the core is seeing 1.03 volts instead of 1.4v. Stole the 95w 3.0 ghz 4x CPU from my shop computer and several benches show notable improvement so the current 960 is still being bottlenecked by the cpu. In that case installing the 980Ti will be a waste of time.
Update below.
I'm still thinking about this but hit a snag on my end. The CPU upgrade from 2.8 ghz -> 3.4 ghz did not work. The motherboard either has a voltage regulator that is borderline for the 125w cpu or Gigabyte is incorrect about motherboard & bios support of the 3.4 ghz unit. Same Deneb core as 2.8 and 3.0 only difference is wattage.
When you install the 3.4ghz cpu, it runs at 403 mhz! The error flag is set so it defaults to minimum speed, motherboard sensor reports the core is seeing 1.03 volts instead of 1.4v. Stole the 95w 3.0 ghz 4x CPU from my shop computer and several benches show notable improvement so the current 960 is still being bottlenecked by the cpu. In that case installing the 980Ti will be a waste of time.
Last edited: