Phanteks RGB conundrum

mvmiller12

[H]ard|Gawd
Joined
Aug 7, 2011
Messages
1,519
Not sure if this is the correct forum for this question, but...

I've got a Phanteks Glacial 1080Ti block for the Asus Strix card, and (due to being used) did not come with the connector cable for the little RGB boards in the block. They use a very small 4-pin connector, and I can't seem to find any cables (or even just plain connectors) that would seem to fit this socket. I've checked Phanteks, Amazon, NewEgg, eBay, and plain old Google, of course. Hell, I've even scoured the Molex site... I'm not afraid to custom make the cable I need.

I'm hoping someone here can point me in the direction of the correct cable, or at the very least, the correct connector so I can make a cable. Pictures below...

WP_20190126_12_10_21_Pro.jpg
WP_20190126_12_09_15_Pro.jpg
 
Thanks for the reply, but that cable won't help. It is for adapting the cable that connects to the RGB boards so that it can be used with standard RGB setups - it plugs into the existing cable. I have 2 of these, actually. What I am missing the cable that actually connects to the RGB boards itself...
 
Thanks for the reply, but that cable won't help. It is for adapting the cable that connects to the RGB boards so that it can be used with standard RGB setups - it plugs into the existing cable. I have 2 of these, actually. What I am missing the cable that actually connects to the RGB boards itself...

Which RGB Board ?

Like a 4 pin ?
 
I know exactly what you're talking about, I've got the same card and block. I suspect that plug is a standard mini molex of some kind. Feels like I see them all over the place for things like fan plugs on GPUs and other electronics. I'll look closely at mine tonight and see if I can ID it for you.
 
I know exactly what you're talking about, I've got the same card and block. I suspect that plug is a standard mini molex of some kind. Feels like I see them all over the place for things like fan plugs on GPUs and other electronics. I'll look closely at mine tonight and see if I can ID it for you.

I actually broke down and contacted Phanteks support. They were willing to sell me a new cable for ~$10 shipped. I went ahead and bit the bullet on it - it's not overly expensive all things considered....
 
Back
Top