Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
i7 7700k not exceeding 70 degrees but the noise the Noctua generates is intolerable.Looking forward to breaking mine Min Ahn, how are your temps looking with it?
Is your 7700k delidded?i7 7700k not exceeding 70 degrees but the noise the Noctua generates is intolerable.
I'm gonna see if I can shove in another small fan on the top portion of the case.
Nah I didn't want to take the risk of losing a CPU that sat on the shelf for 6 months to be built lolIs your 7700k delidded?
Can you guys post builds with the window panel? wanna see what it looks like with aftermarket cards. Thanks!!
I have done some interesting changes to the water cooling, usb and power supply that you may like.
The cutouts in the watercooling radiator allow the case sidepanel clips.
The usb and its bracket is cutaway so much that it fits in the case again.
The powersupply has the power socket and switch removed, power cable attached to the other side, and whole powersupply is mounted upside down so all cables exit on top, including power and fan cable.
I am going to try to use the fan on pull on the watercooling, and make de air go out via the powersupply. This way more fresh/cold air is available to the radiator, and usually powersupplies are able to handle quite a bit of heat.
View attachment 50857
View attachment 50858
View attachment 50859
View attachment 50860
View attachment 50861
View attachment 50862
Salut, je n'ai pas eu ce souci, j'ai reçu le mien hier.Any other french buyer got "l'accès à l'adresse de livraison étant impossible" from Colissimo's tracking? At least two other french buyers and I have had that message and it looks like total bollocks.
I have done some interesting changes to the water cooling, usb and power supply that you may like.
The cutouts in the watercooling radiator allow the case sidepanel clips.
The usb and its bracket is cutaway so much that it fits in the case again.
The powersupply has the power socket and switch removed, power cable attached to the other side, and whole powersupply is mounted upside down so all cables exit on top, including power and fan cable.
I am going to try to use the fan on pull on the watercooling, and make de air go out via the powersupply. This way more fresh/cold air is available to the radiator, and usually powersupplies are able to handle quite a bit of heat.
View attachment 50857
View attachment 50858
View attachment 50859
View attachment 50860
View attachment 50861
View attachment 50862
View attachment 50890
View attachment 50891
Fyi, I decided to leave my CPU-side panel open for these reasons:
- With all the cables and tubes stuffed underneath, the side panel doesn't completely close with the front (a little bump appears)
- The downside of AIO is that components with hitsinks don't get enough airflow- M.2 for example ran at 60"
- Can't see the opened side from where I am sitting lol
Anyone using Cablemod want to post pics of their routing (or point me to them) and the lengths they got? My bottom case fan is getting some turbulence at speed from the pile of excess PSU wires that have to go in that space and I hoped to be able to turn it up for auxiliary GPU cooling. Perhaps I should have got a A9x14 for instead of the A9 for the bottom after all, but I'm hoping a cleaner space would make it alright (and pretty enough to show off)
ASUS board and a card with similar dimensions to the Strix, pretty much perfect data for me, thanks. The PCIE cables are fine going behind the GPU? Just thinking of how the card can bend about a bit in the slot
I had a sata power and data cables running behind my GPU and it caused the drive to be not recognised at boot on a pretty regular basis. Two different drives actually as I thought it was a problem with the drive initially. You should be ok with your GPU power cables if you can fit them though. Just a heads up if you decide to run other cables being the gpu.Routing it behind the GPU works fine. The card bends only slightly, nothing it can't handle. Alternatively, if you want to avoid this, get a 350mm PCIE cable and run it through the front of the A4 case instead (i.e. behind the case front panel), there is a hole at the top of the front frame you can run the cable through and into the GPU PCIE connectors
What is the best way to attach the bottom case fan?
Can you close the side panel with the hose going over the ram?
What do you mean? It's like any case fan. I did mine with the wire the shortest distance to the motherboard in intake, and it was juuuust long enough to reach the fan header. It's the straight cable below the CPU cooler fan in my pictures
Wich Screws are required for screw the noctua 92mm fan to the asetec AIO? 15mm? But from where to buy?
I‘m Kickstarter #91 but still waiting for the new case.... may be week #2...
The screws should fit into the Radiator of the asetec AIO with the Lenght/depth of the noctua Fan. I‘ll measure it