Custom_MOD cases - SX, M mini, SLM, FX

stelsevo

Limp Gawd
Joined
Apr 17, 2014
Messages
150
1.jpg

case SX mid

case SX mid6.8L PHOTO ALBUM
This case is small in size, designed for maximum compatibility of components. You can not worry about overheating the components inside. It is recommended for assembling beginners.
Specs:
- Volume: 6.77L (305mm x 120mm x 185mm)
- Material: Steel frame (1mm), aluminum covers (1.5mm), Powder Coating
- GPU: length <278mm, height <140mm, width <44mm
- CPU Cooler: up to 48mm (CRYORIG C7 recommended)
- FANs: 1x92x25mm
- RAM: up to 55 mm
- PSU: SFX / SFX-L
- PCIe riser: LiHeat 300mm D.type (Complete with body)
- Storage: 2 x SSD 2.5" (Installation instead of a body fan)
Additional fastening of hard disks (Not included in the basic construction) allows you to install
1хSSD/HDD 2.5" 7mm
1хHDD 3.5" or
2хSSD/HDD 2.5" 7mm
With the installed hardware, the allowable size of the video card
GPU: length <177mm, height <140mm, width <42mm(GIGABYTE GTX 1080 Mini compatible)

2.jpg

case SLM itx
Unrealistically thin and compact case! Your XBOX one will seem unrealistically large on the background of a powerful gaming PC assembled in our SLIM case.:cool:

Travel light with a gaming PC assembled in our SLIM case! Play with your friends in the living room in front of a huge 4K TV! Replace your huge PC case.
Do not be like everyone else ... STAND UP ...

Do you want to travel with your home gaming system in your pocket? Then this case is for you! Do not wait for tomorrow ... Order today!


case SLM1 itx 3.7L PHOTO ALBUM
Super rigid design of light aluminum ... Easy installation of components ... External power supply ... This is a small part of the advantages of our case SLIM.
Specs:
- Volume: 3.7L (330mm x 185mm x 60mm)
- The CPU faces up and the GPU faces up
- Material: Steel frame (1mm), aluminum covers (1.5mm), Powder Coating
- GPU: length <185mm, height <135mm (Giga 1080 Mini compatible)
- CPU Cooler: up to 38mm (Noctua NH-L9i)
- RAM: up to 43 mm
- SSD/HDD: 2 x 2.5" 5-9mm
- Storage: M.2 only
- PSU: G-Unique 400W
- PCIe riser: LiHeat 350mm B.type

case SLM2 itx 7.5L PHOTO ALBUM
This small body can accommodate a full-fledged reference video card, an internal PSU SFX power supply. Ideal for a living room. When assembling, it can be difficult to lay cables.
Specs:
- Volume: 7.5L (323mm x 305mm x 76mm)
- Material: Steel frame (1mm), aluminum covers (1.5mm), Powder Coating
- The CPU faces up and the GPU faces up
- GPU: length <298mm, height <130mm < 42mm
- CPU Cooler: up to 58mm
- RAM: up to 60 mm
- Storage: M.2 and options below
1) HDD: 1 x 3.5" (it is possible to install the button in front and USB ports)
2) HDD: 1 x 3.5" and 2 x SSD/HDD: 1 x 2.5" (without USB ports, the back-up button)
3) SSD/HDD: 2 x 2.5" and FAN 80,92,120 x 25mm (it is possible to install the button in front and USB ports)
4) SSD/HDD: 4 x 2.5" and FAN 80 x 25mm (it is possible to install the button in front and USB ports)
5) SSD/HDD: 6 x 2.5" (without USB ports, the back-up button)- PSU: SFX/SFX-L
- PCIe riser: LiHeat 300mm A.type

7.jpg

case FX mini / mid
Very compact, with internal power supply. This is your freedom without limits! Travel with a full-fledged Gaming PC.

Order the Case with our modified Power Supply and get a unique look and maximum of silence with the Noctua fan


case FX mini 4.5L PHOTO ALBUM
Extremely compact case for travelers and connoisseurs of mini! Ideal for building a super compact, Gaming Mini PC. The complexity of installing components.
Specs:
- Volume: 4.5L (225mm x 190mm x 105mm)
- Material: Steel frame (1mm), aluminum covers (1.5mm), Powder Coating
- GPU: length <175mm, height <132mm (Giga 1080 Mini and MSI 1070 Aero ITX compatible)
- CPU Cooler: up to 39mm (Noctua L9i compatible)
- RAM: up to 42 mm
- Storage: M.2 and 1x2.5" SSD
- PCIe riser: LiHeat 300mm D.type
- PSU: Flex ATX 1U Mini-ITX (Seasonic SSP-300SUG, FSP 400W, Athena Power 400W, FSP 500W Platinum etc)

case FX mid 6.1L PHOTO ALBUM
A bit more and already inside is a super powerful video card and a big CPU cooler. Ideal for home entertainment! Easy installation of accessories.

Specs:
- Volume: 6.1L (225mm x 225mm x 120mm)
- Material: Steel frame (1mm), aluminum covers (1.5mm), Powder Coating
- GPU: length <215mm, height <132mm (
ZOTAC GTX 1080ti mini compatible)
- CPU Cooler: up to 50mm (
CRYORIG C7 compatible)
- RAM: up to 50 mm
- Storage: M.2 and 2x2.5" SSD
- PSU: Flex ATX 1U Mini-ITX (
Seasonic SSP-300SUG, Seasonic SS-350M1U, FSP 400W, Athena Power 400W, FSP 500W Platinum etc)

5.jpg

case M mini
case M2 mini 3.9L rev.1.1 PHOTO ALBUM
Specs:

- Volume: 3.9L (115mm x 190mm x 185mm)
- Material: Steel frame (1mm), aluminum covers (1.5mm), Powder Coating
- MB: mini-ITX (170x170mm)
- GPU: length <173mm, height <132mm, thickness < 38mm
Compatibility table
- CPU Cooler: up to 50mm (CRYORIG C7 compatible)
- Storage: SSD/HDD: 1 x 2.5" 5-9mm
- PSU: pico
HDPLEX DC-ATX
- PCIe riser: LiHeat 300mm D.type

Please fill this form if you want to make an order.
If the form is not available tell us. [email protected]

 
Last edited:
As an Amazon Associate, HardForum may earn from qualifying purchases.
VERY tempted for the first or second one to replace my oversized m-atx silverstone HTPC... Would also allow me to run my GTX 750 Ti for light gaming, as it's a full height card, but 170mm long.. My current HTPC case is half height only... Damn.... but.. Moolah. D:

PS nice cases!
 
you need to post more pictures of the cases with the hardware inside, pluss some temps would be nice
 
Damn. That is the perfect mini/compact stealth mini pc with some power to back it up.. I'm just curious about cooling and thermals/noise though?
 
Damn. That is the perfect mini/compact stealth mini pc with some power to back it up.. I'm just curious about cooling and thermals/noise though?

There will be no problem with temps and noise if you'll use 65W CPU and 80W GPU (mobile GTX 1060).

Some test (more tests later):
1050Ti + copper heatsink + Nidec UltraFlo 80mm Ultra Thin 10mm Fan + 100% Load
12V (normal) - 48C
7V (silent) - 51C
5V (ultra silent) - 57C

Ip0K7MM.jpg

ScYSInZ.jpg
 
As an eBay Associate, HardForum may earn from qualifying purchases.
I'd highly recommend the Thermolab itx30 cpu cooler for your nano case if it will fit. It has performance on par with the nh-l9i from Noctua but it is barely 30mm high.

Also, can the 3.28L stand up vertically? Or only horizontal?
 
Last edited:
I'd highly recommend the Thermolab itx30 cpu cooler for your nano case if it will fit. It has performance on par with the nh-l9i from Noctua but it is barely 30mm high.

Also, can the 3.28L stand up vertically? Or only horizontal?
Yes maybe
 
We received the blanks ordered by you corps. One of these days we will collect and we will send on painting. Also, one body behind the black anodize to show you.

305.jpg 307.jpg 309.jpg 310.jpg 314.jpg
 
Hi,
I have a few questions, it would be great if you could answer them before the actual deadline on April 30th ;)
1. Is it correct that you can place a badge with a serial number on the case without addional costs?
I read this somewhere in the Hardforum i think.
2. How are the restrictions for the graphics card measurements, especially for the power connector position/backplate?
3. How ist the LED RGB Logo connected to the motherboard, what color/ight intensity is adjustable?
4. Are the anodized magnet side panels held just by magnets or do they additionally "snap in" like the DAN Case side panels?
5. Are the measurements including the standoffs?
I asked these questions in the SFF-Forum too :cool:
 
Neodymium magnets as fasteners. I am very glad! Although you can choose the screws when ordering.330.jpg
 
Hi,
I have a few questions, it would be great if you could answer them before the actual deadline on April 30th ;)
1. Is it correct that you can place a badge with a serial number on the case without addional costs?
I read this somewhere in the Hardforum i think.
2. How are the restrictions for the graphics card measurements, especially for the power connector position/backplate?
3. How ist the LED RGB Logo connected to the motherboard, what color/ight intensity is adjustable?
4. Are the anodized magnet side panels held just by magnets or do they additionally "snap in" like the DAN Case side panels?
5. Are the measurements including the standoffs?
I asked these questions in the SFF-Forum too :cool:
Greetings!
1. On all buildings will be deleted serial number.
2. For very wide graphics cards, you will have to use a corner connector.
3. In the socket for the fan. Control from the console.
4. Additionally, do not fasten with screws. Not necessary. I can only do it with screws.
5. None. Size without legs. Rubber feet 6mm
316.jpg 334.jpg
 
Last edited:
From today you can order a version with transparent windows made of acrylic 2mm thick. Mounting for choice: anodized magnets or screws. Also, all who have already ordered the case, can additionally order covers made of acrylic for a special price of $10
321.jpg 323.jpg 324.jpg 325.jpg 326.jpg
 
Hi,
Thanks for the clarifications to my questions. :happy:
Is it possible to get both the normal sidepanels and the acrylic windows for future purchases for $10 ?
 
So I just ordered the 3.24L mini that was featured next to the Dan Case A4-SFX in post 2. Looking forward to building a nice little system in it. I'll let the forum know how it goes once I get it.
 
So I just ordered the 3.24L mini that was featured next to the Dan Case A4-SFX in post 2. Looking forward to building a nice little system in it. I'll let the forum know how it goes once I get it.

Please do. I'm interested in one, but a little terrified of the DC-ATX PSU with the external (custom modded) power brick, to be honest.
 
Please do. I'm interested in one, but a little terrified of the DC-ATX PSU with the external (custom modded) power brick, to be honest.


I'm concerned about it too. So far the results seem to be good at least from other owners. Let's hope that some PSU manufactures start making some external PSUs that can work on systems.
 
Now you can order, through us, a case + PSU 400W G-Unique

30cm dc-in cable with dedicated 8pin dc jack
20cm 4+4pin cpu cable
40cm 6+2pin pci-e cable(length is counted from dc jack)
400watts dell brick
f5l9JDo.jpg
 
  • Like
Reactions: Jspr
like this
Hello.
Orders from the 2nd order have not yet been sent, because there were minor difficulties and the contractor did not fulfill the order within the agreed time. We are doing our best on our part. We plan to start orders from next week. We apologize for any inconvenience.

Starting today, we begin collecting orders for the 5th Batch. I would like to write some changes that will now be available both when ordering and by default.
- Dust filters of black color (for all)
- Metal buttons black and chrome-plated color (choice)
- Small design changes (for all)
- Installing the USB 3.1 type C jack (optional)
- RGB backlight with control via smartphone - Bluetooth 4.0 (optional)
- Ordering the PSU G-Unique 400W with the enclosure (MINI 3.24L / SLIM 3.6L)

Also, those who have already made the order can write to us and learn about the possibility of installing these add-ons.
 
specs for Batch 3 - SLIM itx 3.6L rev.4
Change:
- CASE -- Revision 4
- Volume: 3.6L (325mm x 185mm x 60mm)
- GPU: length <185mm, height <135mm (Giga 1070 Mini and MSI 1070 Aero ITX compatible)
- CPU Cooler: up to 38mm (Noctua NH-L9i)
- RAM: up to 43 mm
- SSD/HDD: 2 x 2.5" 5-9mm
Screenshot_1.png
 
Back
Top