New to Intel memory configuration advice needed

narsbars

2[H]4U
2FA
Joined
Jan 18, 2006
Messages
3,357
I just got a
  • 1 x MSI Z87-G45 Gaming LGA 1150 Intel Z87 HDMI SATA 6Gb/s USB 3.0 ATX Pro Gaming with Killer Networking & Sound Blaster ...
board and a 4690K for an evil good price ($125.00). It also came with
G.SKILL TridentX Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2400 (PC3 19200) Desktop Memory Model F3-2400C9D-8GTXD

Honest, I didn't use a gun to get this buy, I was owed money and the guy made me an offer I couldn't refuse. Looking for the best memory configuration.
So used to AMD....fill all slots.
Should I go for three slots with triple channel memory and does it need to be certified?
 
Those boards don't have triple channel memory, it's just dual channel. Filling all the slots won't get you any higher performance, it will just be more RAM.

Go find the manual for your particular board and it will tell you which slots to use for dual channel operation.
 
Those boards don't have triple channel memory, it's just dual channel. Filling all the slots won't get you any higher performance, it will just be more RAM.

Go find the manual for your particular board and it will tell you which slots to use for dual channel operation.

Thanks, I understand the dual channel config. Now to order another 8 gig. I usually ask on the H because I get far better answers than manuals as you just proved:)
 
Thanks, I understand the dual channel config. Now to order another 8 gig. I usually ask on the H because I get far better answers than manuals as you just proved:)

Technically, you can run 3 sticks (at least on most 1150 motherboards), but only 2 of the three will run in dual channel configuration. Given the price of ram though, you would be better served just to buy an additional stick.

PS: That is an awesome price on a 4690. Overclock the hell out of that thing and have some fun.
 
Certification is just marketing. I've never had issues running "AMD" certified memory in Intel boards or vice versa.
 
For the RAM, DDR3 or DDR3L, set XMP, fire and forget.

(Totally jealous of that platform and the price you paid to get it)
 
I had that memory. I believe it runs at 1.65V to get to 2400mhz. XMP has always been like voodoo to me. Sometimes it works and sometimes you just have to set it manually.
 
Back
Top