HardOCP News
[H] News
- Joined
- Dec 31, 1969
- Messages
- 0
Apparently this is a thing now. When was the last time you plugged a strange USB drive into your computer for any reason?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Definition of COMMUTATE
transitive verb
: to reverse every other half cycle of (an alternating current) so as to form a unidirectional current
I am not a power guy, I only know the basics. Still, to me, this sounds basicly like bullshit. Charging capacitors to -110v? from across the USB bus? Sounds like absolute BS to me. The only thing in your PC, Laptop or otherwise, that sees anything beyond 12v is the power supply because it is drawing 110v / 220v from the outlet. From there voltage is reduced to 12v / 5v / and 3.5v if I remember correctly. Nothing I know of including a capacitor could hope to hold 110v.
Add to that this language, "...as we need the N-channel field resistor, which, unlike the P-channel one, can have larger current for the same dimensions." current isn't measured as voltage, it's measured as amps but the guys says nothing anywhere about amps, all he talks about is voltage. He is talking about commuting the current.
If I have this understood, commutation is basically what happens when you convert AC to DC. The problem is there is no AC current in a computer beyond what happens in the power supply. I just don't see how this could possibly be functionally true.
Maybe someone here knows enough more then I to explain it.
It is rather complicated but this uses a DC to DC inverter to charge a number of caps that when full trip the discharge of roughly 110v until the discharge level drops to -7v dc. Thus this device delivered 110v@??? Amps to the data and 5v and ground lines of the USB last I checked had several protections vs this type of thing mostly fuses and diodes. From what I gather this USB bomb is like a tazer.I am not a power guy, I only know the basics. Still, to me, this sounds basicly like bullshit. Charging capacitors to -110v? from across the USB bus? Sounds like absolute BS to me. The only thing in your PC, Laptop or otherwise, that sees anything beyond 12v is the power supply because it is drawing 110v / 220v from the outlet. From there voltage is reduced to 12v / 5v / and 3.5v if I remember correctly. Nothing I know of including a capacitor could hope to hold 110v.
Add to that this language, "...as we need the N-channel field resistor, which, unlike the P-channel one, can have larger current for the same dimensions." current isn't measured as voltage, it's measured as amps but the guys says nothing anywhere about amps, all he talks about is voltage. He is talking about commuting the current.
If I have this understood, commutation is basically what happens when you convert AC to DC. The problem is there is no AC current in a computer beyond what happens in the power supply. I just don't see how this could possibly be functionally true.
Maybe someone here knows enough more then I to explain it.
I am not a power guy, I only know the basics. Still, to me, this sounds basicly like bullshit. Charging capacitors to -110v? from across the USB bus? Sounds like absolute BS to me. The only thing in your PC, Laptop or otherwise, that sees anything beyond 12v is the power supply because it is drawing 110v / 220v from the outlet. From there voltage is reduced to 12v / 5v / and 3.5v if I remember correctly. Nothing I know of including a capacitor could hope to hold 110v.
Add to that this language, "...as we need the N-channel field resistor, which, unlike the P-channel one, can have larger current for the same dimensions." current isn't measured as voltage, it's measured as amps but the guys says nothing anywhere about amps, all he talks about is voltage. He is talking about commuting the current.
If I have this understood, commutation is basically what happens when you convert AC to DC. The problem is there is no AC current in a computer beyond what happens in the power supply. I just don't see how this could possibly be functionally true.
Maybe someone here knows enough more then I to explain it.
I wouldn't be surprised if all it took out was the USB controller, though a computer without input would rather suck.
If you don't know where it's been, don't stick it in.
Saying has multiple applications. May save your life one day.
Huh?
AC what?
No, it uses the USB power to charge up an internal -110V DC charge of sufficient power that when it then uses this to fire the -110V DC back into the 5V and 3.3V power lines (which are usually just connected to the power planes on your computer's motherboard .... it will fry all the chips in the system. I assume even the memory chips in SSD drives. Though this won't affect magnetic data stored on hard drives (though the drive's electronic components will also be fried.
I have no idea, but I'm just assuming the goal is to fry and make useless a computer so as to stop law enforcement or someone else from getting access to it?
Not sure any of the motherboard manufacturers have isolated the USB power to the connectors other than maybe a surface mount fuse.
I would assume something designed to be "hardened" would actually have isolated power/ground on all external connections so getting zapped by EMP or anything else would be prevented.
Sounds like this could definitely ruin someone's day as a prank.![]()
It uses a DC-DC converter. This basically "chops" the DC into AC, then uses an inductor and/or capacitor to create a higher (or lower) DC voltage. It's called a boost converter if the voltage goes up and a buck converter if it goes down. Google LM2577 for a good example of a boost converter.
That being said, this is BS. At best you would kill the USB controller, but once that's gone it won't get the juice for a second pulse, and even if it did, no power would flow backward through a blown USB controller.
I didnt read the article, but capacitors can be charged to very high voltage from a very low voltage.
Think about old school film cameras, they normally used 2 AA batteries but charged the capacitors to high voltages in order to operate the flash.
Huh?
AC what?
No, it uses the USB power to charge up an internal -110V DC charge of sufficient power that when it then uses this to fire the -110V DC back into the 5V and 3.3V power lines (which are usually just connected to the power planes on your computer's motherboard .... it will fry all the chips in the system. I assume even the memory chips in SSD drives. Though this won't affect magnetic data stored on hard drives (though the drive's electronic components will also be fried.
I understand, but I still don't see anything that looks like a cap on the pic of that USB device. Maybe it's on the back ?
And I seen plenty enough caps near a CPU socket and those are at most 12v caps. Any of you guys see even one cap that looks the same on the pic of this USB device?
I understand, but I still don't see anything that looks like a cap on the pic of that USB device. Maybe it's on the back ?
I understand, but I still don't see anything that looks like a cap on the pic of that USB device. Maybe it's on the back ?
I'm more afraid of the malware that might be on these devices.
Wow, a thread full of experts, and most of you don't know wtf your'e talking about.
I won't plug that into my pc's.... and it likely would fry most all the chips.
I think this is more designed to plug into someone else's laptop to attempt to damage it, or to be made as counterfeit products to be mixed in with legitimate items. You buy what you think is a legitimate memory device, and it turns out one of these is in their instead.
As for all the arm-chair speculation about whether this would or would not work... this is why real science is rooted in empirical observation, not hypothesis. Nobody, except perhaps the people who have made this device, have observed whether or not it even functions at all. There's absolutely no way to know what kind of harm it may or may not do until someone tests one and observes the results.
Wow, a thread full of experts, and most of you don't know wtf your'e talking about.
I like the idea of switching capacitors from parrrallel to series, but I suspect the pulse goes back over power. That way the whole board sees it and if they do a shock pulse, nothing can react to the spike but at the same time its not enough to fry anything closed. Most USB devices are passively powered and others would be assumed to be well behaved as part of the spec so for cost savings I doubt very few PC's are hardened/isolated against voltage spikes on the USB power so everything gets exposed. The pulsing could be dozens or hundreds of times a second. Its like having a dirty power supply except intentionally dirty. Everything will suffer.I see how the theory is on it, could be off but here is my best guesstimate:
They are using 12 capacitors, however only using -110V. So to get to that voltage they are charging 2 capacitors in parallel, so 5V each. Once they are charged those two disconnect from the USB VCC+/VCC- power and sets them in series, so 10v between the two and either charges the other 10 caps, probably in series/parallel, so the end result is one cap is -10v. Disconnect power from the series caps and put them back in parallel and switch input power back to USB. Repeat for the other 9 capacitors. Once -110v is achieved send the power to Data+/Data- only, and repeat if VCC+ and VCC- are still receiving power.
Best part is no drivers required! It may not be enough to cause your computer to catch fire, but any IC can be very sensitive to massive sudden power surges. A slight pop of the USB controller is enough to take out the motherboard, especially motherboards with the USB controller integrated into the southbridge.
I think this is more designed to plug into someone else's laptop to attempt to damage it, or to be made as counterfeit products to be mixed in with legitimate items. You buy what you think is a legitimate memory device, and it turns out one of these is in their instead.
As for all the arm-chair speculation about whether this would or would not work... this is why real science is rooted in empirical observation, not hypothesis. Nobody, except perhaps the people who have made this device, have observed whether or not it even functions at all. There's absolutely no way to know what kind of harm it may or may not do until someone tests one and observes the results.
I think this is more designed to plug into someone else's laptop to attempt to damage it, or to be made as counterfeit products to be mixed in with legitimate items. You buy what you think is a legitimate memory device, and it turns out one of these is in their instead.
As for all the arm-chair speculation about whether this would or would not work... this is why real science is rooted in empirical observation, not hypothesis. Nobody, except perhaps the people who have made this device, have observed whether or not it even functions at all. There's absolutely no way to know what kind of harm it may or may not do until someone tests one and observes the results.
Phoenix333, all I am saying is I am looking at the pic and I don't see a single component that even looks like a capacitor. I googled images of capacitors and scoured them looking for examples that look like the components on this board and I still don't see anything that looks like a capacitor on it. I never claimed to be an expert and stated so on my first post. I asked others and I got explanations about how capacitors don't have to be very large to hold a large charge yet this guy didn't point out which components on the PCB were capacitors.
Truthfully my gut feeling is this is a hoax. I'm not saying a device that was made to do what the article claims couldn't damage a computer. I'm just saying the device doesn't look to me like it's representative of the real deal. Come on, the PCB has "High Voltage" printed on it in English, from a Russian website. Just saying.
Kinda what I was thinking.
I am not knowledgeable enough in electronics to have an educated or accurate guess if this would work or not.
My thought was, is there a way to get a hold of and/or recreate such a device and does anyone have a laptop ready to give up it's life in the name of research.
I would think an older laptop
Question: With the USB controllers and sockets on computers adn devices, does the power line come though the controller and data channels or does it pretty much come straight from the power supply.
Is the ground for everything on the motherboard common?
Thanks
Phoenix333, all I am saying is I am looking at the pic and I don't see a single component that even looks like a capacitor. I googled images of capacitors and scoured them looking for examples that look like the components on this board and I still don't see anything that looks like a capacitor on it. I never claimed to be an expert and stated so on my first post. I asked others and I got explanations about how capacitors don't have to be very large to hold a large charge yet this guy didn't point out which components on the PCB were capacitors.
Truthfully my gut feeling is this is a hoax. I'm not saying a device that was made to do what the article claims couldn't damage a computer. I'm just saying the device doesn't look to me like it's representative of the real deal. Come on, the PCB has "High Voltage" printed on it in English, from a Russian website. Just saying.