Help with MSI MB Sata/IDE bios modes

Darlok

Limp Gawd
Joined
Jan 22, 2006
Messages
131
Hi guys.. I just put this rig together today... I have a problem which you may help me with.. I have a Windows XP CD and a Windows 64 7 PRO Retail "UPGRADE" Cd.. I first Install the XP then I upgrade with the Retail... However... I dont know why but I couldn't install the Windows XP CD in this new rig until I switched the Hard Drive Settings to IDE in the BIOS.. If i didn't do that It was giving me Blue screens.. Everything is recognized in the BIOS...

I installed Windows XP using the IDE Mode and am in the process of upgrading all the drivers now. However I noticed my keyboard and mouse sometimes loser power periodically between certain screens.. Doesn't happen all the time but sometimes.. Is that a driver issue? Like when I get a Windows Welcome screen and it prompts me to enter my password.. When i get that prompt.. I try to put in my password right away but the keyboard like loses power along with the mouse sometimes.. After 2 seconds it gets it back.. What component is that an issue with? Or is it because the drivers aren't updated? I am using a Microsoft Natural PRO keyboard (Very old keyboard) And I got the Razer Naga 2014 mouse.. (I didn't install the drivers for these devices yet... They are just running off windows drivers) But should I be getting a delay with or without drivers? Let me know thanks...

Also, back to my issue at hand with the IDE/SATA modes.. How can i change the IDE hardisk to SATA.. When I go to bios and select ACHPI mode or something like that (which is the SATA mode i think).. It blue screens me... I can only do IDE mode otherwise it's BSOD... Is there a big difference between SATA and IDE? Let me know guys.. Thanks

Btw.. that Noctua fan kix ass, compared to the Stock Case fans.. I'm seriously thinking of exchanging the ram for Low Profile ram.. and even exchanging the heatsink for a Noctua.. + getting 2 Noctua fans for my Case... Not sure if i should do that... Thinking about it... Please let me know guys.. Thanks

PCPartPicker part list / Price breakdown by merchant

CPU: Intel Core i7-4790K 4.0GHz Quad-Core Processor (Purchased For $279.99)
CPU Cooler: Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler (Purchased For $36.99)
Motherboard: MSI Z97 PC MATE ATX LGA1150 Motherboard (Purchased For $59.99)
Memory: G.Skill Ripjaws X Series 16GB (2 x 8GB) DDR3-1866 Memory (Purchased For $123.00)
Storage: Samsung 850 Pro Series 256GB 2.5" Solid State Drive (Purchased For $164.99)
Video Card: MSI GeForce GTX 970 4GB Video Card (Purchased For $400.00)
Case: Fractal Design Define R5 ATX Mid Tower Case (Purchased For $119.99)
Power Supply: SeaSonic 650W 80+ Gold Certified Fully-Modular ATX Power Supply (Purchased For $80.00)
Optical Drive: Asus DRW-24B1ST/BLK/B/AS DVD/CD Writer (Purchased For $19.99)
Case Fan: Noctua NF-A14 FLX 68.0 CFM 140mm Fan (Purchased For $25.00)
Total: $1309.94
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2015-01-23 10:03 EST-0500
 
Win XP dosen't have AHCI support out of the box. You will need to install the AHCI driver with a floppy during install. You can try this http://www.prime-expert.com/articles/a11/change-from-ide-to-ahci-without-reinstalling-windows-xp.php method if you don't want to re-install, but you do this at your on risk. You can also slipstream the sata drivers into the install with this http://www.wikihow.com/Slipstream-Your-SATA-Drivers-Into-a-Windows-XP-Installation-CD-Using-nLite method, but once again you do this at your on risk.

As far as the input issue on login, it may have something to do with the Razer Synapse software. My Razer keyboard tries to install the software automatically, perhaps your mouse does the same.
 
Win XP dosen't have AHCI support out of the box. You will need to install the AHCI driver with a floppy during install. You can try this http://www.prime-expert.com/articles/a11/change-from-ide-to-ahci-without-reinstalling-windows-xp.php method if you don't want to re-install, but you do this at your on risk. You can also slipstream the sata drivers into the install with this http://www.wikihow.com/Slipstream-Your-SATA-Drivers-Into-a-Windows-XP-Installation-CD-Using-nLite method, but once again you do this at your on risk.

As far as the input issue on login, it may have something to do with the Razer Synapse software. My Razer keyboard tries to install the software automatically, perhaps your mouse does the same.

I dont have a floppy drive.. I have a USB Thumb drive? but I dont think it's recognized without updated drivers
 
I dont have a floppy drive.. I have a USB Thumb drive? but I dont think it's recognized without updated drivers

Slipstream looks to be your best bet. I dont think you need a floppy for either of the methods I linked above.
 
Last edited:
Not sure what kinda Chipset the Z97 MSI Mate has.. Trying to look for it but can't find it anywhere.. I'm going to slipstream it but need to know the chipset and it doesn't say anywhere :\ How do i find that info out?
 
Uh...Intel Z97. Might see it show up as DH82Z97 (part number).

Any reason you need WinXP? I mean you obviously spent some cash on the build, what's another $80 for Win7. You can run legacy programs in XP Mode.
 
Not sure what kinda Chipset the Z97 MSI Mate has.. Trying to look for it but can't find it anywhere.. I'm going to slipstream it but need to know the chipset and it doesn't say anywhere :\ How do i find that info out?

Z97 is the chipset. Here is a link to the manufacture page http://www.msi.com/support/mb/Z97_PC_Mate.html#support_download

It appears they don't have the XP sata controller drivers listed. Can't say I'm surprised, not many people installing XP now days, especially not on a modern MB.

Like Kirby suggested, you may want to consider installing win7 or 8 and running a XP virtual machine. With Win7 you can download XP virtual box for free.

FYI if you decide to install 7 or 8 dont forget to switch your SATA operation mode back to AHCI before you begin the install.
 
Last edited:
I have a Retail Win Professional 7 UPGRADE only disk.. I use that to upgrade from Windows 32 bit full version... :\ Dont want to buy a Win 7 disk now since the new windows is coming out this year.. So i'm going to wait for that.

So i can't even slipstream? What the?
 
I know this won't work for win 8 and up, but the only time I did the win 7 upgrade on a customers machine I started with the win 7 install disk. The upgrade told me it couldn't find a previous install of XP and asked for the media. I popped the XP disk in the optical drive and clicked 'OK". Win 7 found it and prompted me to put the Win 7 disk back in and did a full and proper install, just like older upgrades used to work.

Not sure how this might work for you but it's worth a try, Win 7 will install the AHCI drivers built in and installs them if you have that feature enabled in the BIOS.

Just a thought.
 
I have a Retail Win Professional 7 UPGRADE only disk.. I use that to upgrade from Windows 32 bit full version... :\ Dont want to buy a Win 7 disk now since the new windows is coming out this year.. So i'm going to wait for that.

So i can't even slipstream? What the?

Unfortunately without that driver your kinda screwed. You could download Win10 Technical Preview and install that until you can get your hands on Win7 or Win8.
 
I know this won't work for win 8 and up, but the only time I did the win 7 upgrade on a customers machine I started with the win 7 install disk. The upgrade told me it couldn't find a previous install of XP and asked for the media. I popped the XP disk in the optical drive and clicked 'OK". Win 7 found it and prompted me to put the Win 7 disk back in and did a full and proper install, just like older upgrades used to work.

Not sure how this might work for you but it's worth a try, Win 7 will install the AHCI drivers built in and installs them if you have that feature enabled in the BIOS.

Just a thought.

Not a bad idea.
 
WOOT.. saved $160... The Upgrade Windows 7 acted as a full Win 7 Installation when installing from scratch... Thanks guys.. Installed it from the getgo and have AHCI support... I'm a happy camper.. THanks alot.. Beer is on me! :0
 
WOOT.. saved $160... The Upgrade Windows 7 acted as a full Win 7 Installation when installing from scratch... Thanks guys.. Installed it from the getgo and have AHCI support... I'm a happy camper.. THanks alot.. Beer is on me! :0

Nice.
 
btw guys.. I bought the Fractal R5 Define @ Microcenter and am kinda in need of 2 screws... They seem to have been threaded on the side panel of the case.. I just mounted the side panel and they dont latch onto the case.. I know I didn't do it.. Is there anyway i can get extra screws for my case.. And if so, who do i get the screws from.. Directly from Fractal or Microcenter? They are the black thumb screws.

Thanks
 
btw guys.. I bought the Fractal R5 Define @ Microcenter and am kinda in need of 2 screws... They seem to have been threaded on the side panel of the case.. I just mounted the side panel and they dont latch onto the case.. I know I didn't do it.. Is there anyway i can get extra screws for my case.. And if so, who do i get the screws from.. Directly from Fractal or Microcenter? They are the black thumb screws.

Thanks

http://www.newegg.com/Product/Produ...004&cm_re=thumb_screws-_-11-989-004-_-Product

http://www.microcenter.com/product/260736/Black_Anodized_Thumbscrew_10-Pack

You would probably have to call Fractal Design because I don't see any listed on their website.
 
Back
Top