No Audio issue on new ASUS Sabertooth

jweller

n00b
Joined
Dec 1, 2011
Messages
22
The Realtek Sound Manager shows that no speakers or headset is plugged in even though they are plugged in. The sound was working fine for a day then stopped. I've scoured the web and tried every suggestion I can find to no avail. It seems this is not an uncommon problem with many folks suggesting the Realtek software/drivers are often buggy. I'm at my wits end. Any other suggestions.

What I've tried:
Updated all drivers/utilities/software
Re-seated all cables and verified in correct slots
Re-set the default audio playback device
 
Re-set the default audio playback device

Sometimes when I unplug headphones while music is playing, it doesn't switch over to my speakers over optical. If you right-click the realtek speaker icon and select Sound Manager, the device selector is a carousel of icons at the top.

Does it look like music is supposed to be playing when you are looking at the volume mixer?
 
1) Reinstall Windows? / change driver?
2) RMA?

On my cheapo 63 euro boards, i do all the time the switch between rear and front audio panel. Both for speakers and mic. Never a problem and the chipset is Realtek too.
 
Boot a Linux desktop CD, if sound works then it's Windows driver problem, otherwise it's hardware defect.
 
1) Reinstall Windows? / change driver?
2) RMA?

On my cheapo 63 euro boards, i do all the time the switch between rear and front audio panel. Both for speakers and mic. Never a problem and the chipset is Realtek too.
Rather than RMA you're better off picking up a soundcard for $20-$30.
Saves a lot of time and trouble, plus you get better quality audio.
 
What output/outputs are you using for your speakers?

I just bought a Maximus VI Formula board and my SP/DIF output wouldn't work no matter what I tried. Same deal, shitty Realtek chipset on a very pricy board.....no matter how ASUS markets it.

I know everything works because I used the same equipment on the board that the Maximus replaced......except I used a dedicated sound card.

So after a week of trying everything, I bought a SoundBlaster card which works flawlessly.:D
 
Sometimes when I unplug headphones while music is playing, it doesn't switch over to my speakers over optical. If you right-click the realtek speaker icon and select Sound Manager, the device selector is a carousel of icons at the top.

Does it look like music is supposed to be playing when you are looking at the volume mixer?

Mine audio also worked for one day then died. I'm using just the light green audio out jack for my generic 2 speaker/1 woofer setup. The front panel jack doesn't work either. I went into sound manager and set the correct defaults and such.
 
1) Reinstall Windows? / change driver?
2) RMA?

On my cheapo 63 euro boards, i do all the time the switch between rear and front audio panel. Both for speakers and mic. Never a problem and the chipset is Realtek too.

I completely wiped and reinstalled Windows 8.1 and updated all drivers on every component. I'm trying to exhaust all possibilities before I RMA since this is my only computer and being without it for 2 weeks would be a hardship. But will do that if it is what is eventually needed.
 
What output/outputs are you using for your speakers?

I just bought a Maximus VI Formula board and my SP/DIF output wouldn't work no matter what I tried. Same deal, shitty Realtek chipset on a very pricy board.....no matter how ASUS markets it.

I know everything works because I used the same equipment on the board that the Maximus replaced......except I used a dedicated sound card.

So after a week of trying everything, I bought a SoundBlaster card which works flawlessly.:D

I have generic 2 speaker/1 woofer setup. There's just one plug for them and I use the light green audio out jack on the back panel. I also tried the front panel audio out headphone jack.
 
This is a brand new $2600 DIY rig I built and without audio it is essentially a very expensive brick. I could buy a sound card but this is a brand new board and I shouldn't have to pay extra because of a faulty board/chipset/software whatever it is. This is "TUF series board which supposedly is "...Certified by Military-standard...". :eek: I'm so frustrated.

Here's my build.

CORSAIR AX series AX760 760W
Corsair Obsidian 650D Case
Intel Core i7-4930K
G.SKILL Ripjaws Z Series 16GB (4 x 4GB)
EVGA 03G-P4-2883-KR GeForce GTX 780 Ti Superclocked 3GB 384-Bit GDDR5 PCI Express 3.0 SLI Support Video Card
ASUS Sabertooth X79 LGA 2011
Seagate Barracuda ST2000DM001 2TB
ASUS USB-BT400 USB 2.0 Bluetooth 4.0 Adapter
CORSAIR Hydro Series H110Water/Liquid CPU Cooler
EDIMAX EW-7811Un USB 2.0 Wireless nano Adapter
LG Black Blu-ray Burner
SAMSUNG 840 EVO 250GB SATA Solid State Drive
Microsoft Windows 8.1 Pro - 64-bit
Samsung Syncmaster p2770fh
Microsoft Ergonomic VX-5000 keyboard/mouse
 
So,

when you go into device manager, the sound is OK?

In the control panel you have selected speakers as the default sound, correct?

You are sure that the OS is not expecting the sound to come from the GPU sound drivers? In other words, you have disabled the GPU as a sound source?
( I generally work around this by not installing the NVidia audio drivers.)

You don't have the headphone as a default?

I feel your pain.

What speakers do you use in your 2.1 sound setup?
 
So,

when you go into device manager, the sound is OK?

In the control panel you have selected speakers as the default sound, correct?

You are sure that the OS is not expecting the sound to come from the GPU sound drivers? In other words, you have disabled the GPU as a sound source?
( I generally work around this by not installing the NVidia audio drivers.)

You don't have the headphone as a default?

I feel your pain.

What speakers do you use in your 2.1 sound setup?

Device manager reports all components/drivers recognized and enabled.

The thing is is that in Realtek Sound manager "Speakers" shows as "not plugged in" even though it is so the option to make it the default is dimmed out - Sound Manager isn't picking up that the speaker is plugged in. So I set Realtek HD Audio as the default. The same thing for headphone, it is dimmed as a choice even though the headset is plugged in so I can't set it as default. The Sound Manager is just so totally f*cked up. I don't see how anyone can use it. I don't recall the speaker vendor but I believe it was Logitech. It's just soe cheap 2.1 speaker set. They are working and not broke. I used them in my previous computer regular up to just a few days ago.

NVIDIA HD Audio does show up as a choice but I keep deselected. Hmm, I'm gonna give that a try -- uninstalling the NVIDIA HD Audio Driver completely. (crosses fingers).

More Details. If I run any of the Windows Sound "Tests" which are available in its various audio properties dialog boxes the sound meter indictor/equalizer is showing pulses of activity just as you'd expect even though no audio is actually come from the speaker/headset.

Also In addition to the one headset which is the typical stereo headset plug I have a second headset which is a Plantronics USB based headset which when I use it the audio comes through fine.

This is the weird part. The Sound Manager has an Option section where you can select either HD Audio or AC97. If I switch back and forth between HD Audio and AC97 it does a few seconds of "processing" and I sometimes get a "...unplugged.." and/or "...plugged in..." notification from Windows. It is just acting so schizophrenic.

Thanks for your help.
 
Back
Top