8 pin 12 volt atx help

ITSTHINKING

[H]ard|Gawd
Joined
Mar 1, 2006
Messages
1,260
Hey guys I had a question. I am building my buddy a new pc to replaced his burned out e8400 rig. He is using an older but healthy corsair 650tx power supply. The motherboard (http://www.newegg.com/Product/Product.aspx?Item=N82E16813128519) has a 8 pin atx connection and I can't get the thing to post. In the past I have have seen rigs that have these but would post if even if a 4 pin was plugged in (although obviously it's not ideal). I was reading around and a gentleman on a different website had an i7 rig that wouldn't post until he bought a 4 to 8 pin adapter which I already went ahead and purchased. Now I know ideally my friend should pony up for a decent PSU with a proper 8 pin 12 volt atx plug but right now he simply cannot afford it. I guess what I am getting at is should this work? I swapped ram, and the LEDS on the video card turn on and power up fans spinning no squeals of death from lack of power. The interesting thing is that the fan on the CPU spins and stops immediately with the 4 plug inserted, but when I unplug it (24 pin still intact) the fan spins as if the board is getting the juice it needs, just not the processor oh which is a FX8350 in case that matters. Any input would be appreciated, curious if anyone else ever ran into this. I find it interesting that some motherboards have 8 pins and will work with a 4 pin, but from what I read, it's good for overclocking and such. Oh well another 3 days I shall wait to see.

edit- http://hardforum.com/showthread.php?t=1728376&highlight=pin this makes me a bit hopefull that the adapter should work, even though a different platform exact same problem
 
Last edited:
Check polarity of that 4 pin into 8pin. My adapter had the polarity in reverse thus PSU shut down. What is your PSU amp rating on the power rails?
 
Nobified[H];1039896529 said:
Check polarity of that 4 pin into 8pin. My adapter had the polarity in reverse thus PSU shut down. What is your PSU amp rating on the power rails?

+12V@54A
 
Plug in your 4pin into 8pin and call it a day. I wouldn't do any overclocking unless your sure it can handle the juice on the original 4 wires.
 
The FX processor needs too much power. I'ts not going to work without it. You can get adapters to go from a molex connector for about $5
 
Nobified[H];1039900578 said:
Plug in your 4pin into 8pin and call it a day. I wouldn't do any overclocking unless your sure it can handle the juice on the original 4 wires.

already tried it, usually that works but not on this chip/mobo. my adapter will be here tomorrow, honestly it should work fine. Wait do you mean plug the 4pin into the 8 pin without the adapter? EDIT- Cuz thats what I tried, didn't work. the UPS tracking says it should be here today some time. I'll post here when I find out how well it works. If my friend wants to OC then i'll let you know how the adapter works out :)
 
Last edited:
The FX processor needs too much power. I'ts not going to work without it. You can get adapters to go from a molex connector for about $5

I got it for really cheap on newegg for like 3 or 4 bucks, I'm impatient and didn't want to chance it stretching past the weekend so I paid extra for the 3 day shipping. Kinda felt stupid to pay more for shipping than the item itself, but I don't want my friend to wait much longer.
 
Back
Top