How to make an ON switch?

Elf_Boy

2[H]4U
2FA
Joined
Nov 16, 2007
Messages
2,610
Hi Guys,

I have an asus m2n32 sli delux I have put together outside a case. I plan to be running it this way. Can I use a jumper as an on switch? What is a good option for a real switch?

I'll go check some of the local computer stores, any thoughts though what I should be looking for to fix this?

I could probably use a reset switch as well.

Everything else is hooked up and ready to go.
 
Power buttons are momentary, so keeping a jumper on the pins won't work. Easiest thing to do in a situation like that is to just short the two pins with a screwdriver. Otherwise any momentary switch should suffice. Same goes for the reset button.
 
The above poster is right. If you want permanent buttons, get som momentary buttons and wire them in.
 
Various companies sell PC diagnosing kits that have a little power and reset button these would just plug right in. Also you can make them more remote like a desktop tower. Frozen CPU sells various options and styles.
 
Power buttons are momentary, so keeping a jumper on the pins won't work. Easiest thing to do in a situation like that is to just short the two pins with a screwdriver. Otherwise any momentary switch should suffice. Same goes for the reset button.

this

the only thing i'd be worried about is if jumpering the wrong 2 pins...i've killed 1 motherboard this way
 
Why not just steal a power button from an old computer? I have a ton of motherboards sitting outside cases (all properly grounded of course) powered by power buttons stolen from all the computer cases I've come across over the years.

It basically is a jumper, but one that is spring loaded so it won't stay on. You just hold it down for a few seconds and let go when the computer turns on.

Otherwise, use a screwdriver to bridge the pins. You can use a jumper too but remember that once the computer is on, you have to pull the jumper off. But seriously, I see junk computers and stuff all the time and just rip out the switches and wiring from old cases. Last time I did this, I used one from 1998 that I found in the garbage.

-edit- yeah it's basically that Startech kit but free if you just salvage one (save it!) from an old PC.
 
You can get a standard momentary contact switch at any auto parts store or even in places such as convenience stores. They can be attached to any 2$ trinket or toy. Chances are you have several around your house as it is. Heck I could make one out of a million different household items.

Shouldn't have too much trouble getting some. Look around..;)
 
Remember if you are having an "outside of case" system. Make sure that the motherboard, hdd, and other components are grounded properly to the PSU. That usually entails some wires wrapped around screws screwed into the PSU.
 
High Speed PC sells a kit just for this. ATX Control Kit I have bought a couple and they work fine.

i really wish when the new atx standard comes out the front panel header would be just 1 big plug like for USB headers instead of fumbling around with the tiny connectors, making sure they're facing the right way and making sure you put everything over the right pins
 
i really wish when the new atx standard comes out the front panel header would be just 1 big plug like for USB headers instead of fumbling around with the tiny connectors, making sure they're facing the right way and making sure you put everything over the right pins
I agree, that certainly would be much better.
 
i really wish when the new atx standard comes out the front panel header would be just 1 big plug like for USB headers instead of fumbling around with the tiny connectors, making sure they're facing the right way and making sure you put everything over the right pins

That would be nice. Some motherboard come with an intermediate female to male piece which sits between the mobo and case connectors. This is about the next best thing.
 
I thought that such a standard existed and everyone was suppose to switch but never bothered because there might be someone with a non standard or older mobo.
 
Back
Top