Not sure what's wrong

2Quad

n00b
Joined
Nov 9, 2011
Messages
3
MB: Gigabyte GA-EX58-UD5
GPU: GTX 560 (new)
CPU: i7 920d0

Been scouring the internet for a while on this one.
About the day of or the day after i installed my new graphics card, i could no longer use the power button to turn my computer on or off. I can still go to the start menu (win7) and shut down that way just fine. system-wide performance is perfectly fine. once the computer is OFF, the ONLY way i can turn it back on is by hitting the switch on the psu and letting it sit for a second or two, and then re-enable the power to the psu, and THEN hit the power button. but the button will only work THAT ONE TIME.

google returned a few posts where someone reported their psu not handling the voltages correctly or something, and that when they put a new graphics card in, the psu just couldn't handle it for some reason (nothing to do with wattage, apparently). so what did I do? went out and got a new psu (modXtreme-pro 700w, OCZ) down from a presumably dieing corsair tx850. the new OCZ psu just came in today, installed everything, and voila... problem still persists. so i'm down 100 bucks and the problem has not changed at all

also, before you ask, yes i have tried manually shorting the power-on jumpers AND using the on-board power button (asw ell as resetting the cmos), but the problem seems to be within, as in, not button-related. any ideas as to what my problem is? if this is the ONLY problem that i'll have to put up with, i guess i can live with it until i buy a new board down the road.
(i'm a piss-poor student so i'll have to wait a bit)
 
Is there a BIOS update available for your motherboard?
I have had a similar issue with a new Video and very old BIOS causing some issues - it is a possibility anyways.
 
@ NoOther:
OCZ ModXStream 700w.
I doubt its a wattage issue, I had the EXACT same issues with the old Corsair 850w. That, and 700w should be way more enough for this system anyway.

@Sherkhan:
tried that just now, nothing changed, still can boot the first time, after that the power button does nothing (built-in onboard one as well). i moved my gtx560 to the second PCIe slot to help with cable management, but that didnt do anything either.

I'm guessing its just a busted mobo, at any rate, i think i'll just keep my comp on most of the time now.
:(
 
Wattage may not be the issue, it could be Amperage, or it could be the PSU is not supplying the right power to the MB. I have had this issue with an Ultra 1000W PSU on a system that only used 750W. I changed to a PC Power and Cooling 860 and the problem went away. My problem was the system was drawing too much Amps on a single 12V rail. The PCPC860 provided a single large 12V rail with enough amps.

So, that being said, it could be an Amp issue. However, the PSUs you are using seem like they should be able to handle the Amps you have. So my next guess (since u updated the firmware) would be something is fried on the motherboard. Maybe some wiring is loose damaged. The onboard power button, you said you tried it and it had the same issue as in not powering on the system?
 
well thats just it though, the power button/mobo button work, but only the first boot, so its like the motherboard no longer recognizes the signal. i've tried manually shorting the power-button leads, so at least i know its not something as stupid as a broken case button. i think you're right though, about a power issue, because this only happened after i got the new graphics card. i'll try putting the old card in, if only to test the turning on and off.
 
You are right, The only way to check if this is motherboard problem or power button is to short the power on lead to power on your motherboard.
As you can see, the system can shut down using start panel under windows.
 
well thats just it though, the power button/mobo button work, but only the first boot, so its like the motherboard no longer recognizes the signal. i've tried manually shorting the power-button leads, so at least i know its not something as stupid as a broken case button. i think you're right though, about a power issue, because this only happened after i got the new graphics card. i'll try putting the old card in, if only to test the turning on and off.

Yeah, tt could be the PSU is not giving the proper Amperage on the 12V rail. The GPU gets some power supplied to it from the MB and the rest by the PCIe power connectors from the PSU. In this case it seems that maybe the MB is not getting enough power to deliver to the all the components, like the GPU. You could try checking the 24 pin and the 8 pin connectors for the MB and make sure they are firmly connected to the MB.
 
Back
Top