Cisco Linksys E2000 Router $29

Violetta

Limp Gawd
Joined
May 27, 2010
Messages
348
As an Amazon Associate, HardForum may earn from qualifying purchases.
Bump for a great deal. DD-WRT/Tomato compatible to boot! Too bad I bought an E3000 for $75 two months ago.
 
The E2000 is a good router? I'm still on a WRT54GS and it's dropping connection a lot for my new laptop lately. This would be a great price to get a new router at.
 
the e2000 isn't a bad router considering it's got gigabit ports, dual band (not simultaneous though). Depending upon what you want to use the router for it can be better than the "upgraded" e2500 which is only 10/100 on the ports, but it is a simultaneous dual band.
 
Thanks OP. The Price showed up as $28.99 for me just now.

EDIT: Looks like somebody cancelled their order and I snagged their's for that price. It's back up to $40.26 now.
 
Damn, probably would have been in for one at $29 but I dunno now...meh.
 
How are these "new" routers (spaceship design) compared to the older design with the antennas?
 
I had a wrt160nl that was bad. It lost connection on my ps3 and my blueray player all the time. The direct connection was just as bad after about 4 months. It might have been do to the over load of device connected, anyware from 5 to 12 devices at anytime.
I ran out and got a dlink 655 and all is good.
 
The WRT160NL is a notorious shitty router, but that is a different design than the E2000.

Price is back down to $31.80
 
Pops up with the $31.80 price for me. Hell you can get a refurb'd E3000 for $60 which is cheaper than newegg's refurb price.

Hell I've been dragging my feet over getting an 'N' router, simply because 'g' is faster that what my internet can push, but might be worth the cash if anything just to get the gigabit ports... however no usb means I need to waste one of those ports on my printer... *sigh* maybe the dlink 655 would be a better choice.
 
It's $39.46 right now through Amazon with Prime. The $31.80 price is not fulfilled by Amazon and the shipping is $6.95.

EDIT: Also, on the E3000 listing, it's through the same seller, and after reading some of the comments I don't think I would buy from them. Apparently they do not accept returns on refurb items, even if the item is DOA.
 
Yeah, better by from newegg or something if you want to risk it all going well. Don't accept returns? uhh fuck you, it doesn't work, I'll sue you! :D
 
Shipping tacks on quite a bit.

I kinda want to get one of these to replace the WRT54G I have running just as a WAP.
 
Just a note to everyone: I've tried everything that is recommended for this router to boost speed over a longer distance (about 100 feet and through two walls) and this router has turned out worse than the old WRT54G it replaced. I would consistently get 20Mbps on the WRT and now I only get 9 with the e2000. So just a note..if you're thinking you'll get faster speeds at longer distances, this isn't the router to get. If you look up on google something like "how to boost range e2000" everyone is complaining about the terrible speeds as you move farther from the router. Kinda regret this purchase.
 
Just a note to everyone: I've tried everything that is recommended for this router to boost speed over a longer distance (about 100 feet and through two walls) and this router has turned out worse than the old WRT54G it replaced. I would consistently get 20Mbps on the WRT and now I only get 9 with the e2000. So just a note..if you're thinking you'll get faster speeds at longer distances, this isn't the router to get. If you look up on google something like "how to boost range e2000" everyone is complaining about the terrible speeds as you move farther from the router. Kinda regret this purchase.

Have you tried DD-WRT on the e2000? That's what i plan on doing when i get mine!

"This router uses the Broadcom 4717 CPU. Broadcom uses a default clock of 300MHz for the CPU, while Linksys has overclocked the CPU to 354MHz. This not only causes excessive heat which reduces routing performance, but is also responsible for many of the Wireless errors reported in the forum. It is suggested that you set the CPU clock to 300MHz until the developers have acknowledge the problem, and newer builds are released to fix it. "

is just one of the things i've read
 
Just a note to everyone: I've tried everything that is recommended for this router to boost speed over a longer distance (about 100 feet and through two walls) and this router has turned out worse than the old WRT54G it replaced. I would consistently get 20Mbps on the WRT and now I only get 9 with the e2000. So just a note..if you're thinking you'll get faster speeds at longer distances, this isn't the router to get. If you look up on google something like "how to boost range e2000" everyone is complaining about the terrible speeds as you move farther from the router. Kinda regret this purchase.

Are you using Wireless N or G?

If you just on G, why not use the WRT54G as an extender?
 
Have you tried DD-WRT on the e2000? That's what i plan on doing when i get mine!

"This router uses the Broadcom 4717 CPU. Broadcom uses a default clock of 300MHz for the CPU, while Linksys has overclocked the CPU to 354MHz. This not only causes excessive heat which reduces routing performance, but is also responsible for many of the Wireless errors reported in the forum. It is suggested that you set the CPU clock to 300MHz until the developers have acknowledge the problem, and newer builds are released to fix it. "

is just one of the things i've read


I haven't had the opportunity to try dd-wrt yet. That was next on the list.
 
What about keeping it at 354MHz and then adding a heatsink to the CPU?
 
The E2000 is a good router? I'm still on a WRT54GS and it's dropping connection a lot for my new laptop lately. This would be a great price to get a new router at.

Wondering the same here. I've had to deal with all kinds of WRT54G routers in the past and they are nothing but shit. Dropped connections, random restarts...such a pain in the ass router. I'm really hoping these new designs aren't just filled with the same old crappy hardware.

EDIT:
Just a note to everyone: I've tried everything that is recommended for this router to boost speed over a longer distance (about 100 feet and through two walls) and this router has turned out worse than the old WRT54G it replaced. I would consistently get 20Mbps on the WRT and now I only get 9 with the e2000. So just a note..if you're thinking you'll get faster speeds at longer distances, this isn't the router to get. If you look up on google something like "how to boost range e2000" everyone is complaining about the terrible speeds as you move farther from the router. Kinda regret this purchase.

Wow, what a shame. I'm not really that surprised though. Linksys is such a shitty brand. No wonder these things are going for only $30.
 
My laptop dropping connection on the wireless has disappeared since I got my E2000 from this deal. It replaced a WRT54GS.
 
Are you using Wireless N or G?

If you just on G, why not use the WRT54G as an extender?

I'm technically capable of getting N (receiver is WMP600N) but it can get G signals as well. I might have to use the WRT as an extender but that kinda defeats the whole purpose in getting the N router in the first place, unfortunately.
 
Wondering the same here. I've had to deal with all kinds of WRT54G routers in the past and they are nothing but shit. Dropped connections, random restarts...such a pain in the ass router. I'm really hoping these new designs aren't just filled with the same old crappy hardware.

EDIT:


Wow, what a shame. I'm not really that surprised though. Linksys is such a shitty brand. No wonder these things are going for only $30.

100 feet through walls is the normal limit for 2.4 imo. 5ghz even less. This doesn't even take into consideration all the interfering items in between those 100 feet. Netgear Linksys Dlink etc all the same. People expect too much from routers/
 
100 feet through walls is the normal limit for 2.4 imo. 5ghz even less. This doesn't even take into consideration all the interfering items in between those 100 feet. Netgear Linksys Dlink etc all the same. People expect too much from routers/

I dunno how accurate it may be, but one particular site actually has speed tests at various limits.

E2000
Short range : 2.4Ghz : 30-50 Mbps / 5Ghz : 60-90 Mbps
Long range : 2.4Ghz : 20-30 Mbps / 5Ghz : 20-50 Mbps

Dlink 655 (2.4Ghz only)
Short range : 90-130 Mbps
Long range : 30-60 Mbps

Netgear WNR2000 (2.4Ghz only)
Short range : 30-40 Mbps
Long range : 25-35 Mbps

So it while you are right there are issues due to walls, interference, etc. At the core there is a definite difference in routers effectiveness.
 
Wish i wouldn't have missed this deal. I could use a new router to replace my old one.
 
100 feet through walls is the normal limit for 2.4 imo. 5ghz even less. This doesn't even take into consideration all the interfering items in between those 100 feet. Netgear Linksys Dlink etc all the same. People expect too much from routers/

I think you missed the part of my comment about a 4 year old router having faster speeds than this e2000. I'm not expecting too much; however, a new router (technically ~1 y/o router) should not be half the speed. That's not too much to ask.
 
I think you missed the part of my comment about a 4 year old router having faster speeds than this e2000. I'm not expecting too much; however, a new router (technically ~1 y/o router) should not be half the speed. That's not too much to ask.

Does your old router have external antenna? Could explain a lot. Sure the Linksys/Cisco ones look all sleek and stuff with no visible antenna but that probably comes at a cost.
 
Back
Top