![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
i7 990x core load temps too high?
- Thread starter s1ngular
- Start date
Falkentyne
[H]ard|Gawd
- Joined
- Jul 19, 2000
- Messages
- 1,891
No way any damage was done at those voltages.
You know that #Prochot log isn't even triggered until 95C.
And emergency lockup (cpu level shutdown of cpu clock) is somewhere between 110c-125c.
You know that #Prochot log isn't even triggered until 95C.
And emergency lockup (cpu level shutdown of cpu clock) is somewhere between 110c-125c.
granted im watercooling but im running @ 4.672 with 1.46 volts and ive never seen anything over 71c,,, i know it dont help you much but i honestly think those temps are alittle high especially for that voltage .. try reseating your hsf, i would be honestly scared of those temps and by the way that 71 is after a 8 min Pov-Ray Render with all cores being used on the beta version..
granted im watercooling but im running @ 4.672 with 1.46 volts and ive never seen anything over 71c,,, i know it dont help you much but i honestly think those temps are alittle high especially for that voltage .. try reseating your hsf, i would be honestly scared of those temps and by the way that 71 is after a 8 min Pov-Ray Render with all cores being used on the beta version..
I forgot to mention that I just installed that cpu the same day I ran that test. Maybe the Artic Silver 5 needs some time to settle in?
I forgot to mention that I just installed that cpu the same day I ran that test. Maybe the Artic Silver 5 needs some time to settle in?
silver 5 needs 200 hrs burn in...
most modern thermal paste/ grease don't and will get you much cooler than that without the burnin time...
silver 5 needs 200 hrs burn in...
most modern thermal paste/ grease don't and will get you much cooler than that without the burnin time...
I ran the test again and got lower temps this time 77c/85c. I think I need to let the AS5 burn in more.
Thanks guys.
burn in never hurts, but on a side note, very nice case you got thereI ran the test again and got lower temps this time 77c/85c. I think I need to let the AS5 burn in more.
Thanks guys.
burn in never hurts, but on a side note, very nice case you got there
Thanks - here's what I did to it.
http://img857.imageshack.us/g/p1020761.jpg/