How Apple Is Screwing Your iPhone

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
I told you Apple is always on the hunt for new ways to screw your iPhone. One good thing that came from this article, I now know what a pentalobe is. ;)

That’s what repair company iFixit claims, at least. The company recently discovered that Apple has quietly switched the screws in the latest shipments of the iPhone 4 from a basic Phillips head to a tamper-resistant screw that you can’t remove with any screwdriver you’d buy at a hardware store. The screw in question is called a “Pentalobe” (see right), a five-point head with a round shape resembling a daisy.
 
Apple is making it harder to void your warranty? Those bastards!
 
Honestly, I'm surprised that they haven't been doing this since the very first iphone.
 
This works out pretty well for iFixit though. Their new "iPhone 4 Liberation Kit", including pentalobe screwdriver, will set you back a cool $10. Sort of a "roundabout rob from the rich and give to the quite a bit less rich" sort of deal.
 
And now Apple will make another exorbitant amount of profit off the "legit" screwdrivers that repair and service shops will have to buy from them directly since nobody else can make or sell them. Let's see here what a fly on the wall in the Apple meeting that came up with this idea might have sounded like...

"$1.29 for a Pentalobular screwdriver, sell it for $40... 3000% profit margin... hell, Steve, that's an even better sell than the Bumper that costs us $.98 to make and we were dumping like mad for $29.99. Remember those times?" <mad maniacal laughter ensues...>

Yeah, I can believe that. :p
 
I thought the pentalobe was the part of the male brain that made me involuntarily stare at a woman's 5 points of contact (face, chest, stomach, thighs and backside) as she walked by?
 
Kinda like every company ever using triangle wing screws in their electronics, right?

Maybe next time they'll just send some DMCA's out to their biggest modding adversaries.
 
I thought the pentalobe was the part of the male brain that made me involuntarily stare at a woman's 5 points of contact (face, chest, stomach, thighs and backside) as she walked by?

That's the pervalobe...

Probably just a spelling error on your part though? Your left index finger went up on the keyboard off of the F when it should have went down?
 
I dont see why people would have a problem with this. Nobody actually owns an iphone, we all know that its rental equipment from apple.
 
wow nothing new here..nintendo was the first with those FU torx screw drivers on the famicon cartridges back in the day.
 
I thought the pentalobe was the part of the male brain that made me involuntarily stare at a woman's 5 points of contact (face, chest, stomach, thighs and backside) as she walked by?
Oh, you look at the face? I've never thought about trying that before.
 
$1.29 for a Pentalobular screwdriver, sell it for $40... 3000% profit margin... hell, Steve, that's an even better sell than the Bumper that costs us $.98 to make and we were dumping like mad for $29.99. Remember those times?" <mad maniacal laughter ensues...>

How dare a for-profit business make a profit!
 
That's the pervalobe...

Probably just a spelling error on your part though? Your left index finger went up on the keyboard off of the F when it should have went down?

Thank you for the correction. Spellcheck should have caught that! ;)

Oh, you look at the face? I've never thought about trying that before.

:D Well, you gotta check for the Adam's apple too!
 
Someone should start selling bootleg pentalobe screwdrivers just to piss them off.
 
just for fun...

"Apple's Diabolical Plan"? When did this turn into FOX News??

Nice fear-mongering :)

Pentalobe heads are actually much better for extremely small screws, they strip out less frequently than phillips. Its one of the reasons that german auto manufacturers use them on precision parts.

News flash - pentalobe drivers aren't rare, nor are they expensive. Anyone who is a serious tinkerer, should have a full set of Torx, and a pentalobe driver if you do any work on automotive electronics (in addition to the other various drivers used). They are easily and inexpensively obtained from automotive repair stores and suppliers, and I'm sure there will now be a booming business selling them on ebay as an "iPhone specialty tool".

Nice ad for the overpriced kit at iFixit, though; WHICH by the way DOES NOT include a pentalobe driver; they include a five-flange phillips so you can remove (and possibly destroy) the pentalobe screw, and give you replacement phillips screws to put back in their place.

The screws aren't tamper-resistant (as stated in the vid), either - they are precision screw-heads. If you you are the type of person who has torx or penta drivers, you are likely the type of person who would be taking apart your iPhone for self-repair. If you have a 'normal' toolbox, you are probably better off taking your phone into the 'genius' bar, anyways.

Sorry if this comes off crass, but this is a non-story (its really more of an ad for ifixit's kit).

It would be better just to buy the correct tool, than to come off like chicken little...
 
I was >this close< to making a post that said exactly that: the iFixit "kit" they're selling doesn't have a proper Pentalobular bit in it, just a regular 5 point Torx, and it's entirely possible that using the bit could cause more damage than necessary. I know it's supposed to be a one-shot solution as once you pull 'em out you put Phillips head screws in, but even so the possibility for ruining those screws is still a very real one.
 
its funny how everybody is shitting their pants over these screws when almost every electronics manufacturer uses some form of un-common screws on most of their devices.
 
Why not use the pen trick like with the gamebit screws on nintendo stuff.

Get a transparent bic pen. Heat it up over a candle, gas stove or something similar until the plastic is soft.
Press into screw and wait for it to harden. Blow on it if you wish.
Twist and remove screw.

Should work for the rest of the screws before it breaks. A biro and a candle is about 50c at most.
 
Damnit I mean twist and remove first screw. Then use as a standard screwdriver. You dont need to reheat it for every screw.

That would be silly...unless their all different...

Plus you can use non transparent plastic biros, but the trasparent seems to be the toughest.
 
+1 this. What techie / handyman doesn't have a set of these in his tool box these days?

Most people have star-head screwdriver/head bits which is mostly used for small screw's in electronic devices. Don't use star heads on these, they will strip the center right out. Although star heads are just as well used.
 
umm these screw bits are readily available.

Yes home depot does not have a wide selection.
 
A woman has a face?

Yea, it's about 2 feet or so above the sammich makers, some people call em hands tho

And as for the pen trick, that didnt work so well on my try. I tried heating the screws up and using an off flatthead to do it, kills the grooves in the plastic but if you do it again on the in trip with a hair bigger common head screw then youre usually golden

Of course I've also stripped the screws on a Wii and just heated the screws enough to pry the fuckers out lol (that wii is held together with Gorilla glue now lol)
 
iFixit benefits from Apple's greed and control.

Now they make money from selling this kit.
 
Yea, it's about 2 feet or so above the sammich makers, some people call em hands tho

And as for the pen trick, that didnt work so well on my try. I tried heating the screws up and using an off flatthead to do it, kills the grooves in the plastic but if you do it again on the in trip with a hair bigger common head screw then youre usually golden

Of course I've also stripped the screws on a Wii and just heated the screws enough to pry the fuckers out lol (that wii is held together with Gorilla glue now lol)

You like short womens? :confused:

Are you heating the screws or the pen :confused: You have to use tough plastic transparent pens for the best effect. The molteness of the plastic is also import, as is how fast it cools. You dont want giant plastic crystals that will shatter. You also dont want it to not be molten enough so that it doesnt form properly! There is some art to it which you only gain by meditation and practice. Also practice alone works well, with better time efficiency. The more you practice the better tools you'll make, and like a tech age caveman youll have one that will be dug up in 3400AD.

If you're heating the screws up to get them out you might as well just drill them :D Gamebit screwdrivers can be gotten nowadays for not so much however.
 
Back
Top