Anything special I should do when RAIDing SSDs?

NoxTek

The Geek Redneck
Joined
May 27, 2002
Messages
9,300
So I just bit on a pair of 80GB Intel X25-M G2 drives. :)

I have been wringing my hands on whether to buy a single 160GB or a pair of 80GB drives and Newegg helped me out with that decision by doing a surprise price drop on the 80GB model. Yes, I realize that if I RAID them I will lose TRIM commands being passed onto the drive (well, until Intel comes out with ICH10R drivers that pass TRIM to RAIDed drives)... but I figure if hundreds of thousands of Gen1 owners can do without it so can I. I typically reformat and reinstall Windows every three or four months anyway.

So I'm wondering if there is anything I need to do special when creating the RAID array? Any special settings in the RAID configuration in the BIOS? What about alignment? I know that Windows 7 is supposed to handle the alignment correctly and transparently on an SSD volume but does that also hold true for a RAID array or do I need to manually intervene? What about cluster sizes in the RAID setup and all that?

Also I know that some people create a RAID volume that's 80% of the actual capacity of the physical drives in the array, citing that this helps the drives keep their spiffy performance over a longer period of time. Is it really worth doing this or can I skip it and use the full capacity given that I usually reformat every three or four months anyway? There isn't something I'm missing here, right? It won't 'wear out' the drive faster or anything, right?

Thanks for any and all advice! :)
 
Nothing special that you need to do really.....I think I have mine set to a stripe size of 64k from what I recall....excellent performance even for drives over a year old....

Capture.png
 
Nothing special that you need to do really.....I think I have mine set to a stripe size of 64k from what I recall....excellent performance even for drives over a year old....

Excellent! I gather from your sig and the screenshot that this is with two Super Talent 32GB SSDs in RAID0? How old is your windows install? Do you notice a decrease in performance over time?
 
Excellent! I gather from your sig and the screenshot that this is with two Super Talent 32GB SSDs in RAID0? How old is your windows install? Do you notice a decrease in performance over time?

You have assimilated correctly my friend! :)

I did notice a degradation in performance after about 8 months. At which point I proceeded to make an image of my system, reboot and set my BIOS from RAID to IDE/SATA mode and boot to XP that I have on another HDD (W7 or Vista would work as well)....I then run the wiper utility from Super Talent for both drives and then reboot....set BIOS to RAID.....recreat the RAID stripe and re-image the OS onto the stripe.....sounds like a PITA but its not too bad to do every 8-10 months IMO.
 
Read my thread for a little more info on your situation.

The performance loss on my graphs can be corrected somewhat by letting your computer run 24/7 to let the "GC" do it's job since TRIM isn't avaliable.

If you didn't buy new drives do yourself a favor and use HDDErase before creating your 20% partition during OS install.

Factory fresh drives don't need it.

Have fun!
 
Last edited:
I ran dual 80's as a 160 in RAID for a little over a year, my advice is don't. After I did the secure erase and set them up in win7 as "bare" drives and let trim do its thing my write performance skyrocketed and overall system responsiveness was much better. Since I really didn't want multiple drives I just made one a game drive and mounted it under c:\games. 80GB for OS/apps, 80GB for games, and a 1.5GB HDD for bulk storage (such as for games that aren't actively getting played, movies, downloads).

Let win7 + trim do its thing, don't hinder it with RAID.
 
Read my thread for a little more info on your situation.

The performance loss on my graphs can be corrected somewhat by letting your computer run 24/7 to let the "GC" do it's job since TRIM isn't avaliable.

If you didn't buy new drives do yourself a favor and use HDDErase before creating your 20% partition during OS install.

Factory fresh drives don't need it.

Have fun!

Thats good advice.
 
I just wanted to say thanks to Hippie and everyone else for their advice and comments in this thread, I have read and am thinking and will continue to read and process anything else you guys have to add. :)
 
I got my twin 80GB X25-M G2 drives yesterday! Installed them today and am pretty giddy sofar. It was quite interesting seeing Windows 7 Ultimate install itself completely in just about 8 minutes. (Installing from a bootable USB flash drive).

I decided not to RAID0 the drives. At least not until TRIM works in such configurations...
 
Back
Top