SSD Raid 0. Question and Theories

Frozen8950

Limp Gawd
Joined
May 30, 2003
Messages
351
OK so i havent built a new computer since 2002 when I went all out with 2 36gig 10K Veliciraptors in Raid 0.. Blazin fast i know...

Anyways I am a fan of Raid setups (Who isnt lol) and Im going to get 2 128gig SSDs for Raid 0,,

However Ive been thinking about it and looking at prices and doing some reading..
2 128g SSDS is around $680 and it will net 256Gigs in raid 0
4 60g SSDS is around $680 and it will net 240gigs all in Raid 0

Now Ive never surpassed 2 drives in Raid so im not sure if its worth it but what
if any performace gains would I get by going with 4 drives instead of 2?
Im lookin at about the same price will a little less gigs and Im ok with that.

Im just wondering if the extra power needed and space for the extra 2 drives is worth
the performance gains.

Long story short.. 2 or 4?
 
I would get 4 without a doubt. Like you say cost wise it just makes more sense. The ICH10R if that's what you're running will likely be maxed out with 3 for sequential transfer rates, but you'll still get a performance boost from the 4th in small random access numbers having the additional controller, which for the operating system is key.

Also in a modern system they are so fast you can enable compression without a performance hit and gain another 30%+/- space. I don't notice a decrease in performance doing that on even 1 drive, so 2 or 4 drives even better.
 
The performance from 2 to 4 drives will be a big bump. However make sure your data is not stored on those things, should one fail you lose everything. It's basically adding more points of failure for a non-parity/non-mirrored array.
 
I am getting the ICH10R.. So your saying I will need to use an Addon RAID card to utilize all 4 drives because the ICH10R can only handle 3 drives?
 
Is that question directed at me?

RAID0 has zero redundancy, if one drive fails you lose all data across the array. I'm sure it will be fine with more than 3 drives as you should be able to use as many SATA ports as the board includes attached to the controller/chipset. But for performance RAID0 rocks your socks off.
 
I run 4 OCZ Vertex 64Gb in raid-0 on an Areca 1680ix as the 'c' drive on my system. It is amazingly fast and makes a huge difference for video processing (as long as I make sure the temp files land on that drive). No worries on the reliability - I take two automated images every night using Ghost15, one as a drive-copy image onto a spinny disk so that I can boot immediately after a failure and one stored as an image file on my WHS to restore the Raid.

I've had it fail twice in the last 6 months. Both failures were 'pilot error' type failures when I knocked things around after opening the case. Both times the image restore was perfect had me out-of-service for less than an hour before complete restore.

I agree - important data files never touch the raid-0 for long-term storage. Everything is on Raid-5 arrays and replicated to the WHS using "Goodsync".
 
@PigLover

That's a nice setup and pretty much an ideal way to run things where raw performance is required. :)
 
Yeah ICH10R maxes out around 600MBps+/- in raid0.

You could always just grab 3. Either way, it's light years from two 36gb raptors you'll be pleased. ;)

http://www.hardocp.com/article/2009/07/06/ssd_raid_scaling_under_windows_7/1

Ok i see what your saying. If I get a PCI Xpress RAID card would it be just as fast as the onboard raid? Something to think about I guess. Id like an even number of drives if I could get it...

Edit: ok i just read that link.. Looks like 3 drives it is.... i really dont want to spend 450 on a dedicated raid card lol.. I have a single SSD in my laptop that I use exclusivly now and when I have to boot up my desktop and use the 2 raptors im annoyed by how sloow it is.. Im sure going to 3 drives will make me really happy :)

Thanks for the info.
 
Last edited:
I have 2 x 160GB Gen 2 X25-M's and am thinking of picking up a third one
for this exact reason.

Going from a single SSD to 3 (or 4) under Windows 7, you will lose TRIM support
at this time, so plan on an HDDERASE (or such) maybe once a year of each single drive in the array, followed by an image restore.

Quick question, only slightly ot:

I have a system image created by Windows 7 Ultimate stored on an external drive,
The image is my current boot drive, a single 160GB X25-M.
Can I restore that image to a RAID 0 partition consisting of 3 x 160GB X25-M drives?
Any gotchas with that process?
 
Last edited:
Just as a technical nitpick, pcix and pci express are not the same thing physically or otherwise so be careful.
 
I have 2 x 160GB Gen 2 X25-M's and am thinking of picking up a third one
for this exact reason.

Going from a single SSD to 3 (or 4) under Windows 7, you will lose TRIM support
at this time, so plan on an HDDERASE (or such) maybe once a year of each single drive in the array, followed by an image restore.

Quick question, only slightly ot:

I have a system image created by Windows 7 Ultimate stored on an external drive,
The image is my current boot drive, a single 160GB X25-M.
Can I restore that image to a RAID 0 partition consisting of 3 x 160GB X25-M drives?
Any gotchas with that process?

Yes - losing TRIM due to raid is a big problem. That's why if you are going to run SSDs in Raid you need to ensure your drives firmware supports a garbage collect function so that Trim and period full erase is not needed.

I know that the OCZ Vertex and Agility series drvies (with FW rev 1.5 or higher) do this. I know that the Intel drives do not (although the new 2.x firmware released a week or so ago might). I can't speak for any others.
 
I know that the Intel drives do not (although the new 2.x firmware released a week or so ago might). I can't speak for any others.

All garbage collection is not the same.

AFAIK all SSDs must have a form of idle time garbage collection but OCZ Vertex and Agility have something a little different.

If you're running the Intel SSDs in RAID, like many of us, creating a larger spare area is all that's needed to keep top performance.
 
...If you're running the Intel SSDs in RAID, like many of us, creating a larger spare area is all that's needed to keep top performance.


I am planning to run a RAID 0 using either 2 or 3 160GB Gen 2 X25-M's.
I currently have 2 of them that are not setup as RAID.

Running Windows 7, what do you mean by the "larger spare area", and how much of this space do I need to designate?

Thanks!
 
Running Windows 7, what do you mean by the "larger spare area", and how much of this space do I need to designate?

I have mine at 20% (2 Intel 80GB G2s) and it's working well.

1.) Use HDDErase in IDE mode to clean each drive.

2.) Create spare partition while installing the OS.


The spare partition must be kept unformatted/untouched/unused.

Check out some posts by sub.mesa for the nitty-gritty technical stuff.
 
Back
Top