GTX 480 SLI Stable Overclocks

  • Thread starter Deleted member 201992
  • Start date
D

Deleted member 201992

Guest
This was tested for 10 minutes using furmark 1.8 extreme max burning mode.
BnttL.jpg
 
Last edited by a moderator:
Time for some benchmarks! Did you get software that lets you overvolt? If so how much more voltage can you give the cards?

Thanks!
 
Time for some benchmarks! Did you get software that lets you overvolt? If so how much more voltage can you give the cards?

Thanks!

I don't have any software that let's me overvolt, hopefully the next beta or release of msi afterburner will provide that. I don't want to resort to flashing to an Asus bios like I did when I had 5870 crossfirex.
 
coool that in line with reviewers numbers. now on to some gaming goodness to appease the massed :D

Yeah the reviews were spot on. Gotta thank Kyle @ [H] and the guys over @ guru3d.com ;)
 
How do you have your 480s installed? Side by side slots or do you have some extra spacing?
 
I'm stable at 801 core and 1602 shaders. My cards are spaced apart on the MB in my sig.
 
Would you mind answering a few questions so I know what to expect?

-Are the cards slotted next to each other?
-Did you manually adjust the fan speeds to get the best cooling?
-What are load temps like playing a fairly stressful game but with vsynch on keeping the load down a bit?

ty if you can answer any of this.
 
Would you mind answering a few questions so I know what to expect?

-Are the cards slotted next to each other?
-Did you manually adjust the fan speeds to get the best cooling?
-What are load temps like playing a fairly stressful game but with vsynch on keeping the load down a bit?

ty if you can answer any of this.

-Yes they are next to each other, no room on the mobo.
-Auto fan speeds
-I NEVER use vsync but load temps are 96c in furmark 1.8 but it never hits 90c playing metro 2033 or crysis.
 
Nice info! Still have two more 480s on the way for my new build but BOY do I want to at least just try 2x SLI on my current rig.

Just playing around with oc'ing my single 480 does reveal some intresting stuff. The 480 is a better overclocker than I would have imagined for such a hot running part.
 
I use the software that Asus sends out with their cards.
 
Using ATI Artifact tester and MSI afterburner my Gigabyte seems to only like 770(1440) on the core.
 
I can only get 750/980/1490 in SLI.

How do you guys test? Raise the core to the max, then start the mem/shaders?
 
Got it stable at 825 (1650) @ 1.07V. I wasn't even aware you could change the voltages on these.
 
MSI Afterburner 1.6 beta 5 is supposedly coming out Monday so all those with gtx 470's can get them from the guru3d.com forums. BTW Kyle, I'm not trying to advertise other forums, just helping the community :)
 
Ohhh nice! Can't wait to start seeing some 470 overclocks. :cool:

Here's mine using SmartDoctor:

gtx470ocfinal.png


3dvgtx470-800c-3650memPhysxOFF.jpg


dirt2proper.jpg


Game, bench, and furmark-stable, peaks at 86c with a long session (1hr+) of BF Bad Company 2. Ambient temperature is about 67f in the room. I'm quite pleased with the card :). At this 73% fan setting it's comparable to ~40% fan on the 5870 that I had previously in overall noise, but a little gentler/lower pitched a tone.
 
Game, bench, and furmark-stable, peaks at 86c with a long session (1hr+) of BF Bad Company 2. Ambient temperature is about 67f in the room. I'm quite pleased with the card :). At this 73% fan setting it's comparable to ~40% fan on the 5870 that I had previously in overall noise, but a little gentler/lower pitched a tone.

1. Why not a 480?
2. Are you saying that 73% fan on the nvidia sounds just as quiet as 40% fan on a 5870? *skeptical* What are your idle and load temps?
 
1. Why not a 480?
2. Are you saying that 73% fan on the nvidia sounds just as quiet as 40% fan on a 5870? *skeptical* What are your idle and load temps?

well as for 2 the 470 fan is good deal quieter than the 480 fan. so is it possible.
 
1. Why not a 480?
2. Are you saying that 73% fan on the nvidia sounds just as quiet as 40% fan on a 5870? *skeptical* What are your idle and load temps?

1) 480 cost more, I figured I would step up to a 480 if the 470 was too slow for me ;).

2) Yes, the 470 fan really is pretty quiet overall comparatively. Idle is around 35c, load is 86c peak after hours of gaming.
 
Using ATI Artifact tester and MSI afterburner my Gigabyte seems to only like 770(1440) on the core.


dont use the ATI artifact tester.. while its suppose to support nvidia cards it doesnt like them when your overclocking.. neither my 8800GT at 760/1890/1050 which was stable in crysis nor my GTX 260 at stock could run ati artifact tester without artifacting.. but both ran furmark no problem for 5 hours..
 
If only I could get ahold of EVGA's artifact tester.

That's what I was planning on too but didn't get to snag the EVGA 480's, anyways MSI Afterburner and the artifact tester packaged with it do quite good.

I'm running a pair of PNY GTX 480's in SLI. I have not tested these cards individually like I normally do, so I don't know how high a single 480 can go, but it is usually a tad higher than sli.

24/7 OC
800mhz core
1600mhz shader
2100mhz memory
1.1-1.125v (set to 1.125v though 1.1 will run it but is too close to border for my liking.

Max OC with stock cooling
840mhz
1680mhz
2200mhz
1.125v

Gets hot and loud when being stressed, but thats normal. In games temps and sound level is much more reasonable. I think this chip could go much higher with good cooling and a more aggressive voltage change than MSI Afterburner will allow.

I expect with a revised chip to see a B stepping 512sp Fermi with 800mhz clocks stock. With a shift to 28nm in the coming year, its possible they could go even higher.
 
Last edited:
Back
Top