Building home media/print server please help

jrel209

Weaksauce
Joined
May 31, 2008
Messages
99
Hey guys, I've built computers before, this is my first time going into the dedicated server. So I apologize if what I am asking seems dumb or obvious to most here. :) I've tried posting on tomshardware but no real answers, but I found this thread and looked at some of the post and hoped sure I'd get some answers here, so here I go!

--Why and what I will be using it for--
I want to be able to backup the little bit of music and movies I download. Mostly consist of bleach, naruto, movies that are too terrible to watch in theaters or rent, and music! Also most importantly lots and lots of school work and the misc. documents I'd like to store. I plan on setting up a raid-1 for all of these files in a double 500gig HD (I am trying to be as cheap as possible, I have 500gig's now and I can barely fill it up, so I thought 500gig's is all I'll really need w/ the raid-1 mirroring it for backup, plus in future I can always get two more 500gigs) And lastly, I'd like to be able to use it as a print server for my network which is about 4 different computers.

--THE BUILD!--
CASE // Supermicro CSE-731i w/ 300watt psu
http://www.newegg.com/Product/Product.aspx?item=N82E16811152123

CPU-Mobo Combo // AMD Athlon II X2 240 Regor 2.8GHz 2 x 1MB L2 Cache Socket AM3 65W and GIGABYTE GA-MA785GM-US2H
http://www.newegg.com/Product/ComboDealDetails.aspx?ItemList=Combo.357440

HD // x2 WD 500gig 7200rpms sata 3g
http://www.newegg.com/Product/Product.aspx?item=N82E16822136073

MEMORY // x2 G.Skill 1g DDR2 1066
http://www.newegg.com/Product/Product.aspx?item=N82E16820231143

I will be exploring the O/S with either Freenas/Fedor/Ubuntu that is depending on whatever works best for my learning curve.

Please any opinions whether or not this should fit what I am trying to do will be greatly appreciated. This is a new learning experience and I hope it will be a fun while I learn some basic knowledge in using samba an ssh!
 
Sounds pretty good! But I would consider getting larger HDs right off the bat, for only 40 or 50 more bucks you can get WD green 1+ tb drives.

Also you should consider upgrading your network to gigabit if you haven't done so already because when transferring large amounts of data 13 MB/sec does get pretty annyoing on standard 10/100 cable.

I recommend this switch http://www.newegg.com/Product/Product.aspx?Item=N82E16833316076 I have used it and other netgear and dlink stuff and its faster and more reilable than anything else I can find in its price range!
 
Well it depends on your budget. That router looks fancy and all but its still consumer level, notably it doesn't support jumbo 9K frames (essential for getting max speed of gigabit)

Personally the HP is as good as it gets in that price range and with its lifetime warranty its dang near unbeatable.

I've tested it directly against Netgear's GS108T http://www.newegg.com/Product/Produ...3&cm_re=netgear_switch-_-33-122-203-_-Product

and it gets consistently 10-20 MB/sec faster speeds especially with multiple devices connected and doing simultaneous transfers.

In my home network I have a pentium 4 box with intel gig cards running smoothwall as my firewall and router. To this box I have

1) the managed version of that HP switch I recommended running my wired portion

2) A consumer level Linksys WRT54GS wifi G router (overclocked running dd-wrt) running my wireless.

To me at least, upgrading to wireless N isn't too big of a deal since it still can't get anywhere close to gigabit speeds and my consumer level linksys does the job of letting me check my email on my laptop.

But my buddy has this router, and swears by it for its uber range and speed http://www.streakwave.com/Itemdesc.asp?ic=ESR-9855&eq=&Tp=

In summary: evaluate whether you need wireless N or not, b/c that HP blows the other stuff out of the water. Not to say that you can't get both, but its costly. Secondly I would rather get the EnGenius product as they make pretty souped up high powered stuff.
 
Is mATX a major requirement?

Also I recommend this setup instead:
$59 - AMD Athlon II X2 240 CPU
$68 - Asus M4A78LT-M LE AM3 AMD 780L mATX Motherboard
$54 - Crucial 2GB DDR3 1066 RAM
---
Total: $181 plus tax and shipping

Only $10 more but you get a HSF as well as the high probability of a cheaper RAM upgrade in the future. In addition, you also get a higher chance of future CPU upgrade compatibly should you ever need more CPU power.
 
+1 for the HP Procurve recommendation. Mine has been rock solid since the day I plugged it in.
 
Is mATX a major requirement?

Also I recommend this setup instead:
$59 - AMD Athlon II X2 240 CPU
$68 - Asus M4A78LT-M LE AM3 AMD 780L mATX Motherboard
$54 - Crucial 2GB DDR3 1066 RAM
---
Total: $181 plus tax and shipping

Only $10 more but you get a HSF as well as the high probability of a cheaper RAM upgrade in the future. In addition, you also get a higher chance of future CPU upgrade compatibly should you ever need more CPU power.

I like this setup as well.

Also i would get at least 1TB HDDs
Yea you have probs now filling it up, but if you are like most people it wont be long before you are out of space.

I started with 2x 400gb drives a couple of years ago and was like man i will never fill these.....now i have 20TB go figure:rolleyes:

So if you can afford it get larger HDDs.
Get gigabit switch/router
 
So if I get the switch the general setup would then be..

isp modem >> router (all wireless devices connect from router directly) >> switch >> computers and server?? I only have 3 computers total that are going to be wired via cat6.

I guess my understanding of what a switch was a little bit fuzzy, I thought it was just to add more ethernet ports to an existing router? Will the switch actually improve my performance over the net, or only with file switching between the computers in my network?
 
It will increase transfer speeds between those computers that are connected to the switch.

Your internet and wifi/router conencted devices will not perform any better
 
Is mATX a major requirement?

Also I recommend this setup instead:
$59 - AMD Athlon II X2 240 CPU
$68 - Asus M4A78LT-M LE AM3 AMD 780L mATX Motherboard
$54 - Crucial 2GB DDR3 1066 RAM
---
Total: $181 plus tax and shipping

Only $10 more but you get a HSF as well as the high probability of a cheaper RAM upgrade in the future. In addition, you also get a higher chance of future CPU upgrade compatibly should you ever need more CPU power.

No, mATX isn't a major requirement for the server; just so happens while shopping around it seemed to be most cost effective setup. A lot of the cheaper server cases were catered to mATX it seemed like on newegg. If you have other recommendations I'd like to look at it and compare them, I am open to any idea at the moment.

nitrobas24: Thanks for clearing that up too.
 
http://www.newegg.com/Product/Product.aspx?Item=N82E16811219019

Holds 15 drives if you use a 5 in 3 hotswap bay in place of the DVD bays

I have the bigger version (longer) :)

Server-1.jpg
 
No, mATX isn't a major requirement for the server; just so happens while shopping around it seemed to be most cost effective setup. A lot of the cheaper server cases were catered to mATX it seemed like on newegg. If you have other recommendations I'd like to look at it and compare them, I am open to any idea at the moment.
Cool. Then I recommend this setup:
$105 - Antec 200 Case + Antec Neo Eco 620C 620W PSU

Costs the same as your earlier choice once you factor in shipping costs. Yes the 620C is overkill but at least you'll always have headroom for future upgrades. In addition, that combo basically drops the PSU down to $55. You won't find a better quality and larger PSU for $55. Also that PSU will be needed to power the many drives that Antec can hold.

The Antec case can hold up to six drives right off the bat and can fit an additional 4-5 drives depending on whether you go for a 4in3 or 5in3 drive bay. So expect about 10 drives from that case alone.
 
Cool. Then I recommend this setup:
$105 - Antec 200 Case + Antec Neo Eco 620C 620W PSU

Costs the same as your earlier choice once you factor in shipping costs. Yes the 620C is overkill but at least you'll always have headroom for future upgrades. In addition, that combo basically drops the PSU down to $55. You won't find a better quality and larger PSU for $55. Also that PSU will be needed to power the many drives that Antec can hold.

The Antec case can hold up to six drives right off the bat and can fit an additional 4-5 drives depending on whether you go for a 4in3 or 5in3 drive bay. So expect about 10 drives from that case alone.

That link you provided was dead.
 
Back
Top