OCZ SSD 1.5 Firmware

I haven't been keeping up on the firmware details...

I'm still on 1.3 on my Agility.

Last I knew they didn't have TRIM playing nice with anything but the generic Microsoft / Intel SATA driver...is it working with AMD SATA these days?
 
went from 1.41 gc to 1.50 today. burned iso to cd, rebooted, set first boot device to sata, set sata controller form raid to sata mode, flashed both, then rebooted...set back to raid mode, no issues here.
 
Last I knew they didn't have TRIM playing nice with anything but the generic Microsoft / Intel SATA driver...is it working with AMD SATA these days?

I don't think so, but I don't think it's the firmware's fault either... Currently TRIM won't work w/Intel's Matrix Storage drivers either, not w/Vertex drives nor Intel's own X25-M.
 
I'm using firmware 1.41 with my two Vertex drives in RAID0.

I'm waiting for Intel to release drivers that will pass TRIM commands before worrying about upgrading to 1.5.

Don't know what Intel's malfunction is. Windows 7 has been out months and still no TRIM supported drivers. :(
 
I've been running this for a few days on my M225, it's Indilinx's 1916 firmware for the other drives, it's been running great, a tad bit faster then the last firmware in the AS SSD Bench as well.
 
Not an expert, but as far as I've read, the only drivers that pass TRIM commands, are the Microsoft drivers.
 
Yeah I ran some experiments, doesn't look like the 10.2 AMD ACHI drivers supports TRIM. Thank goodness for FW 1.5 though. Background GC works like a charm.
 
my Alienware M11X laptop doesnt even have a dvdrom, so i cant do the update. an external dvdrom might work but i dont have one.
 
Does anyone know how I determine the firmware on my Agility drive? Does an application do it?
 
Device Manager -> Disk Drives -> <select SSD> -> Properties -> Details -> Hardware IDs
 
Does anyone know how I determine the firmware on my Agility drive? Does an application do it?

Crystal Disk Info is a good util to look at all kinds of disk info, including firmware version.
 
wasnt in my device manager because im using an external usb dock for it. but hd tune did find it. im at 1.4. I guess ill try 1.5 and then 1.6.

guess it might be risky trying the firmware upgrade thru an external dock..
 
Yea at this point 1.6 is the latest and can be tricky to get to depending upon the type flash chips it uses. Went fine on my vertex but my agility was pretty rough. I would recommend upgrading straight from the sata 2 port on you MB thats what OCZ recommends.
 
Installed my drive to an internal connector. Successfully flashed from 1.4-->1.5-->1.6. Here are benchmarks at each stage. No difference at all, but at least I know I'm current.

So how do I do some kind of drive cleanup now that I have firmware 1.5 that supports TRIM? The drive is formatted brand new and blank right now.

1.4 Firmware
ocz120gbssdFIRMWARE1.4.jpg


1.5 Firmware
ocz120gbssdFIRMWARE1.5.jpg


1.6 Firmware
ocz120gbssdFIRMWARE1.6.jpg
 
To let the automatic garbage collector run leave the system running, but log out of windows. Give a few hours and it will do its thing.
 
To let the automatic garbage collector run leave the system running, but log out of windows. Give a few hours and it will do its thing.

You don't have to log out. You just need to let the drives go idle for a while. Leave the system on when you are away. Make sure your "idle/sleep" timer is at least 30 minutes so that you don't just shut things down too quickly when idle.

I've been running 4x60GB Vertex SSDs in a raid-0 since last summer. Before they released the GC firmware it only took a few days of use before you could see signs of degradation in benchmarks and after a week or so of heavy use it had a noticeable impact on running Windows. I seriously considered giving up on my SSD experiment. Since release 1.41-GC I've never been able to detect any signs of SSD degradation. I've kept them on current firmware, now running 1.6, and am very, very satisfied with the results of their GC algorithm
 
Meh, this is only useful if you're Running RAID or not on Windows 7. Working TRIM means you don't need GC.

I'll stick with the 1.41 my Agility shipped with. But for those of you with RAID, enjoy!
 
so there isnt any settings at all i need to check? i DONT think im using ACPI thing in bios right now..
 
so there isnt any settings at all i need to check? i DONT think im using ACPI thing in bios right now..

If its a Vertex or Agility:

If you are running firmware rev 1.5 or higher, you don't need to do anything at all. Both GC and Trim work concurrently & automatically on that version (and on 1.6)

If you are running 1.41 then there are two different firmware revisions - one with GC and one without it that supports TRIM. They separated it to deal with the conflict they found in 1.3. If you are running the "Trim" version, Windows7 and non-AHCI with Microsoft drivers then all is well - Trim is stable here and will keep you running fast and happy.

If you are running 1.3 on Windows7 then you really want to update the firmware. That version was unstable due to a race condition where Trim and GC conflicted.

If you are running 1.2 or lower then you don't have GC or Trim. Its stable, but you need to clean it up manually every so often. Update it.

I've been through this progression from the beginning. OCZ has managed to win me as a "customer for life" (or at least till they screw up pretty badly). I've never dealt with any tech company that has done so much to get their product updated quickly as problems/issues were found. Their forums and the 'official' people who post there are top notch. And they speak very freely there about the issues they are having and why they are doing to get them fixed. Very transparent and very refreshing. Steve Jobs (and his iPhone4 team) could learn from them.
 
Last edited:
Is there much risk to update from 1.3? I saw some horror stories about lost data. I really don't have the time right now between work and double-speed summer classes to mess with a reinstall / restage / etc.
 
Is there much risk to update from 1.3? I saw some horror stories about lost data. I really don't have the time right now between work and double-speed summer classes to mess with a reinstall / restage / etc.

I just put my Vertex in the mailbox today because of 1.5 causing massive data corruption. I'm not very happy with OCZ right now.

It may have gotten fixed now that the firmware has gotten out to all of the unknowing beta testers like me. If you don't have the time to image the drive since under best case scenario you may lose data during a flash.
 
i had zero issues going from 1.4 to 1.5 to 1.6 in a 15 min period.

Just because you had zero issues doesn't mean that he won't. It's bad practice to flash the firmare without imaging the drive first and if he doesn't have time to do that and deal with the very possible data loss after a flash by running sanitary erase and restoring the image then it's best to wait.

I'm pretty sure that they fixed the issues that cause the types of data corruption that I and quite a few other people saw. I flashed to 1.5 a few months ago.
 
I wasn't aware of a data corruption problem with 1.5. I was aware of corruption problems in 1.4/1.41 that were fixed in 1.5...interesting.

I also have not ever had a problem going from 1.3-1.4-1.5-1.6 without losing data. But plenty of other people have. It won't take you more than 10 minutes reading the OCZ forums to know that doing this is not a good idea without backing up the drive first. If you don't have time to back it up, and you doing have time to recover from a data loss, and if you are not having problems with the FW on the drive - then don't upgrade it. Wait for the day that you do have time to back it up...

Of course if you think you don't have time to recover from a data loss, why aren't you backing it up now? Just because you don't do the firmware upgrade doesn't mean there aren't plenty of other ways you could lose that data. Like the old Fram oil filter commercials said: you can pay me now, or you can pay me later...
 
Back
Top