HDDErase 3.3 and Intel drive.. help!

Copyright

Supreme [H]ardness
Joined
Nov 17, 2000
Messages
6,004
I have tried it many different ways and on two different controllers. Always in IDE mode and I cannot for the life of me get this thing to work... both 3.3 and 4.0 lock up in teh same spot...

*******************************************************************************
| SECURE ERASE FREEWARE: COMPLETELY ERASE YOUR HARD DISK DRIVE |
| Version 4.0 |
*******************************************************************************

Then I get a blinking cursor nad nothing else.. I even tried in my g/f's laptop but I could not find a way to set it to IDE mode. What else can I do?
 
It's usually because of this.....

In order for SE to properly launch, the host must not have BIOS level protection that will inhibit SE from being passed on to the host controller. Many BIOS manufacturers have implemented BIOS level protection to avert the threat of any malware of virus that may exploit Secure Erase as a means to destroy data.

I've read of guys trying to "trick" the BIOS protection by hot plugging the drive but that didn't work for me.

AAR, read thru this for a better explanation.

I got HDDErase to work once on my old Abit IP35-Pro but it wouldn't work again. My Asus P6T has a BIOS lock that I can disable but I haven't tried it.

I'm using Tony-Trim on my G1 RAID0 array and it's working fine so I hope I'm done with HDDErase.
 
Well I have an older dell at work I am going to give this a shot on.
 
Switch IDE to "Compatibility" mode from "Enhanced" if you have the ability to do so. That is what I had to do when I had this problem.
 
I finally got it to work.. IDE mode I knew about but after doing some reading the Intels flashed to the 8820 now work with HDDErase 4.0. So 3.3 got past the part above on an older machine for (this wouldnt work in IDE Mode on my box) but it got hung after I selected the drive. This was the Bios protection kicking in. HDDErase 3.3 couldnt do anything past this. I ran HDDErase 4.0 and when I selected the drive it let me know my Bios was locked but it could attempt to unlock it. So it told me to reboot and run HDDErase again. This time it worked perfectly and I was able to Secure Erase both with HDDErase 4.0. So just a heads up to everyone.... if you have 8820 firmware... HDDErase 4.0 WILL work!
 
So just a heads up to everyone.... if you have 8820 firmware... HDDErase 4.0 WILL work!

Neither 3.3 or 4.0 would work on my Abit Pro MB after the first time.

I'm glad it worked on your MB but it's still a YMMV. :)
 
Neither 3.3 or 4.0 would work on my Abit Pro MB after the first time.

I'm glad it worked on your MB but it's still a YMMV. :)

Seems like older boards work better and also HDDErase 4.0 works better then 3.3 for me because of hte optoin to disable the bios protection. Have to have intel 8820 firmware for 4.0 to work thtough. I have also read some ppl are tossing them in older laptops and getting it to work.
 
That kinda follows my experience.....3.3 worked 'till I upgraded the firmware on my G1 but after that neither 3.3 or 4.0 would work on that Abit board.

I didn't even get to the unlocking screen with 4.0 no matter what I tried.

I still see many that can't use either version but I'll bet this BIOS lock switch on my new Asus P6T would work.

You never did mention what board you're using but it still seems like a YMMV depending upon the MB manfg.
 
MSI GD65 didnt work and either did my g/fs laptop an HP DV4T. I stuck it in a Dell Optiplex 755 and set the drive to Legacy mode and then used HDDErase 4.0. This combination was teh only way I got it to work. Intel should really release something for these drives. We got screwed out of TRIM as it is lol.
 
MSI GD65 didnt work and either did my g/fs laptop an HP DV4T. I stuck it in a Dell Optiplex 755 and set the drive to Legacy mode and then used HDDErase 4.0. This combination was teh only way I got it to work. Intel should really release something for these drives. We got screwed out of TRIM as it is lol.

:D

There ya have it...a big YMMV. :D

There was no indication Intel would ever release TRIM for these drives and I bought them with my eyes open knowing all the facts.

For me Tony-Trim is working just fine to keep the drives in great condition and I see no reason to use HDDErase again.
 
:D

There ya have it...a big YMMV. :D

There was no indication Intel would ever release TRIM for these drives and I bought them with my eyes open knowing all the facts.

For me Tony-Trim is working just fine to keep the drives in great condition and I see no reason to use HDDErase again.

What is Tony-Trim? First I have heard of this.
 
So this is just a method of using perfect disk 10? Seems easy enough. Not sure why I even complainted about not having TRIM.. im in RAID0 anyways :rolleyes:
 
I'm having the same problem. Switching to IDE compatibility mode doesn't seem to detect the USB drive. Are there any windows based apps with the same functionality?
 
Last edited:
I'm having the same problem. Switching to IDE compatibility mode doesn't seem to detect the USB drive. Are there any windows based apps with the same functionality?

Why don't you use the CD ISO?
 
5$ for a cd? Someone is really putting it on you at that price. 100 packs are like 30$.

perhaps he has no use for optical media, god knows I don't. Hell I don't even have a DVD/CD drive in most of my computers anymore.
 
5$ for a cd? Someone is really putting it on you at that price. 100 packs are like 30$.
$5 for a stack of cd's, as that is generally the cheapest you can buy a set from a store. Buying 100 discs for $30 to use a single disc once proves my point of it being a waste of money even more.
 
Last edited:
$5 for a stack of cd's, as that is generally the cheapest you can buy a set from a store. Buying 100 discs for $30 to use a single disc once proves my point of it being a waste of money even more.

Damn.. you don't burn anything else? Guess im used to have a couple hundred of DVD's and CD's laying around.
 
Damn.. you don't burn anything else? Guess im used to have a couple hundred of DVD's and CD's laying around.

Why bother burning some tiny 5MB file to an entire CD when you could just as easily throw it on a flash drive? I love having blanks (both CDs and DVDs) around as much as the next guy, but for something so small that's just silly.
 
Back
Top