Antec Launches Continuous Power Facts Website

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
The folks at Antec have put together a new website with the sole purpose of educating the masses on the differences between ‘continuous power” versus “peak power” and why it matters to you.

Continuous Power and “Peak Power” are two very different standards, and unfortunately often misused. Continuous Power describes the real power a PSU can output continuously. This means that a PSU with 500 watts of Continuous Power can maintain stable, continuous output within the maximum load of 500 watts. A PSU with 500 watts of Peak Power, however, can only maintain such output for a few seconds.
 
Even with it being a shameless plug for their products (obviously, it's on their site!), it brings up a rather good point about the two. Short, sweet and to the point is also a good thing.
 
with the number of antec psu failures ive seen i recommend against their products to my clientelle.
 
If anything, maybe it will drive some sense into the folks who buy the $40 house brand case at their local store because it comes with a 500w power supply thinking that it will be enough for their new system. Most of the time those power supplies can only handle half of that rating continuously.
 
Even with it being a shameless plug for their products (obviously, it's on their site!), it brings up a rather good point about the two. Short, sweet and to the point is also a good thing.


And that is why we passed the info on to you. :D


If anything, maybe it will drive some sense into the folks who buy the $40 house brand case at their local store because it comes with a 500w power supply thinking that it will be enough for their new system. Most of the time those power supplies can only handle half of that rating continuously.


Hopefully it will. I don't know how many times I have heard someone complain about an el cheapo PSU that buckles under the demands of a higher end system.
 
I just want to see a vid of a few transparent Apevia PSU's all melting at the same time till they fail, is that so much to ask?
 
with the number of antec psu failures ive seen i recommend against their products to my clientelle.

Can't say that the community here would agree with that. Corsair is usually my first recommendation, with Antec and BFG running close behind
 
with the number of antec psu failures ive seen i recommend against their products to my clientelle.
That was their older CWT based power supplies that had problems with bad capacitors. Those are not sold on the market any more. The newer Delta and Seasonic designs perform very well.
 
PC&PowerCcooling lists their models by constant output and lists peak too so it isn't a original idea on Antec's part but it is good to see a effort to put the truth in advertising of their models.
 
with the number of antec psu failures ive seen i recommend against their products to my clientelle.
What do you recommend instead? I hope it isn't something like OCZ or FSP.

When it comes to the consumer market, Antec's PSUs are right at the top of the heap. And it doesn't get much better than their Signature line.
PC&PowerCcooling lists their models by constant output and lists peak too so it isn't a original idea on Antec's part but it is good to see a effort to put the truth in advertising of their models.
All quality PSU manufacturers rate their PSU according to continuous output capabilities. Antec and PCP&C aren't special in that sense.
 
I have had two older 500W Antec units fail, they were not premium or anything and didn't do any damage when they failed after working for a few years. The systems simply wouldn't turn on anymore.
 
What do you recommend instead? I hope it isn't something like OCZ or FSP.

I've had older Antec SmartPower units failing left, right, and center for the past several months now, and every single one-without fail, out of about 10 failures so far-has taken something else in the system with it when it died. Hard drives, motherboards, RAM, video cards, etc.

I've read the reviews of the newer Delta-based units, and they look to be very good. Delta has a good reputation that's well deserved and I can't fault the Antec Signatures or the CP-850 (although if memory serves, they use something of a grab bag of capacitors on the secondary, at least in the CP-850, which I don't like; I could be wrong though, I'd have to go back and check).

But after my experience with the SmartPower units, I will not be using anything Antec sells again. Ever. Not because they failed-they were something like 4years old or more, the failures I can deal with at that age-but because they inevitably took something else with them. Even the generic "TigerPro" 350w PS that the last IT guy put in one of our Athlon XP-based workstations that I just replaced managed to hold itself together enough that nothing else in the system was damaged when it /quit.

At this point, as far as normal, non-server PSes go, if it doesn't say Corsair or PCP&C on it, I'm not buying it. Period.
 
Now we need Rockford and the likes to make a Web site about peak wattage vs RMS wattage....
 
"Unfortunately, many brands on the market falsely advertise Peak Power as Continuous Power. Some will even mislead consumers by calling their power supply “MODEL-430W”, when the “430W” in fact refers to Peak Power, not Continuous Power. This is a dishonest and costly practice. The result? Misled users can experience overheating, short circuits and other damage with their new power supply."

"Some will even mislead consumers" "This is a dishonest and costly practice."
If they really want to impress me then Antec should spend the money to get the laws changed to protect me from the "dishonest and costly practice", instead of the consumer having to wait and try a class action, because on my own I can't afford it.
I give Antec +2 for recognizing the "dishonest and costly practice" and give them +10 and my business to stop this practice that they recognize within the Industry. If they see this happening and don't do something about it then they are no different then the ones committing this "dishonest and costly practice"
 
Now we need Rockford and the likes to make a Web site about peak wattage vs RMS wattage....

When it comes to car audio if the continous rms power isnt listed in the specs then obviously the manufactuer is being shady. Don't buy from them. Fosgate and most known brands list peak and rms in the specs at the specified resistance from what ive seen.
 
those who have been around in the PC and car audio fields know that some companies are full of crap on their specs don't get me started on rebranding
 
At this point, as far as normal, non-server PSes go, if it doesn't say Corsair or PCP&C on it, I'm not buying it. Period.

Same here, love Corsair's power supplies, probably the best I've ever used. On a side note, I think its pretty cool that Corsair has done such a good job providing a diverse range of products that are all good quality. It isn't like most companies that will have good HSFs but crap cases, etc. I reckon that with my next build I will have a PSU, RAM, and case from Corsair. If they provided an alternative method to mount their H50 cooler (something like an outside mounting bracket) then I might use that as well.
 
"Unfortunately, many brands on the market falsely advertise Peak Power as Continuous Power. Some will even mislead consumers by calling their power supply “MODEL-430W”, when the “430W” in fact refers to Peak Power, not Continuous Power. This is a dishonest and costly practice. The result? Misled users can experience overheating, short circuits and other damage with their new power supply."

"Some will even mislead consumers" "This is a dishonest and costly practice."
If they really want to impress me then Antec should spend the money to get the laws changed to protect me from the "dishonest and costly practice", instead of the consumer having to wait and try a class action, because on my own I can't afford it.
I give Antec +2 for recognizing the "dishonest and costly practice" and give them +10 and my business to stop this practice that they recognize within the Industry. If they see this happening and don't do something about it then they are no different then the ones committing this "dishonest and costly practice"

it would be hard to do so when the industry lets them do it. not to mention the consumers. what really needs to happen is a class action lawsuit (can't believe I just said that) against these companies. Best buy would be on the top of that list along with quite a few others. but to put it on antec or corsair is unfair. the best they can do is lead by example, and they do.
 
I was buying a bunch of the EA380 and EA500 when they would go on sale at NE and other stores, and put them in customers computers at cost. After building computers for a few years, they are amazed that thier computers are quiet and stable, not 1 failure from a PS yet.
 
Back
Top