How well will this work with crossfire?

MasterShake

Limp Gawd
Joined
Feb 28, 2005
Messages
392
I'm going to upgrade my crappy asrock 4coredual to what I've read is the best p45 mobo but for crossfire it only has a 16x and a 8x pci-e slot. I have a sapphire 4890 toxic, if I were to eventually get another one for crossfire is that 8x enough or would it bottleneck?

http://www.newegg.com/Product/Product.aspx?Item=N82E16813128358

I'm going to be running a q6600 and 4 gb ddr 2 1066 also, if that matters.

Thanks!
 
P45 motherboards can only run Crossfire in 8x/8x mode. However, for current video cards that bandwidth is enough.
 
I read that for 2 4890's 2 8x pci-e's would be fine. I am thinking about getting a Gigabyte GA-EP45T-UD3P when it is back in stock, it's the same board as what I was looking at but with ddr3 support and 4gb of decent ddr3 is about $10 more, I'm wondering if it's worth it.
 
If you have the money step up to an X58 chipset.

Of course will demand a new board, DDR3 RAM and a new CPU.
 
If you have the money step up to an X58 chipset.

Of course will demand a new board, DDR3 RAM and a new CPU.

I checked that out and it's about $650, with this upgrade I am going from ddr to ddr2 or 3, doubling the amount of ram and be able to oc my q6600. The board I'm using now actually can't handle it so it underclocks the q6600 by about 5%.
 
OK, I see.
You might then seriously consider the Gigabyte X48 board I highlighted. It a great board, uses DDR2 and S775 CPUs.

You might be able to find a used X48 DS-4 or DS-3 board, same board,same BIOS,less bling.
 
Newegg has an x48 ds5 up there with a free 750gb hd with pruchase...
 
There is a udp3 version that takes ddr3, I have my eye on that but will ddr3 make a difference compared to ddr2???
 
I think I'm going to go with the udp3, the x48 version doesn't seem to be as much of an overclocker.
 
If you're on LGA775, I'd just stick with DDR2 and a P45 board. The X48 is nice, but you might not have as much luck OCing it as a P45.
 
I have a P45 board in my system (Asus P5Q Pro). Does anyone know if I can run two video cards in the two x16 slots in non-crossfire mode?

I was thinking about using my system for business applications and would like to run 3 or 4 monitors using two NVIDIA Quadro NVS 295 x16 cards. However, the Quadro NVS 295 cards are also available in the X1 interface. So if two x16 cards won't work in non-crossfire mode I could run one x16 and one x1 card. But will the P45 chipset allow two cards in the x16 slots to run independantly in non-crossfire?

Sorry for the hijack :)
 
Yes, you can. Obviously they'd still be limited to 8x per card due to the number of PCI-E lanes the chipset has.

As I pointed out, the Quadro NVS 295 is available in both x16 and x1 interface. This seems to indicate that the limit of 8x PCI-E lanes would be a non-factor, correct? We're not talking about a high-end 3D card so it seems that 8x lanes per card would be plenty for what those cards are designed for. Please advise if I'm mistaken but it seems like there would be no difference if I ran two x16 cards (where each card is limited to x8) or one x16 and one x1 on a P45 board.
 
As I pointed out, the Quadro NVS 295 is available in both x16 and x1 interface. This seems to indicate that the limit of 8x PCI-E lanes would be a non-factor, correct? We're not talking about a high-end 3D card so it seems that 8x lanes per card would be plenty for what those cards are designed for. Please advise if I'm mistaken but it seems like there would be no difference if I ran two x16 cards (where each card is limited to x8) or one x16 and one x1 on a P45 board.
I think that a 1x slot would definitely limit its bandwidth in computationally-heavy situations, but an 8x slot will be absolutely fine.
 
Back
Top