EVGA Releases Two Products

Terry Olaes

I Used to be the [H] News Guy
2FA
Joined
Nov 27, 2006
Messages
4,646
EVGA released two new products over the weekend. The first is the Hydro Copper Waterblock for the X58 Classified motherboard. This waterblock is designed to cool the north- and south-bridge. The second new release is the GTX 295 CO-OP Edition. The card is available in air- and liquid-cooled versions and is mostly the same as the reference card except for a slight bump in memory clock speed, which results in a small increase in memory bandwidth.

See front page for pics.
 
Ouch, that waterblock for the x58 mb is quite expensive at $129.99. Even if temps would be somewhat lower, I don't really think that it would give better results when overclocking.
 
As much as I think it's a good thing they innovate, one has to wonder... whats the point? It's no different then a regular GTX295 other than a single PCB; the performance will be the same?

Just makes you wonder when the new GTX300 or whatever theyre going to be named series of cards are just around the corner
 
As much as I think it's a good thing they innovate, one has to wonder... whats the point? It's no different then a regular GTX295 other than a single PCB; the performance will be the same?

Just makes you wonder when the new GTX300 or whatever theyre going to be named series of cards are just around the corner

I wonder how much of an improvement they'll have over the current GTX 285 cards. Its really the only question mark with the i7 build I'll be doing in October. I know I'll be going SSD and i7, but will I also get a new video card? We'll see.
 
Isn't the 295 a dual pcb design? Did EVGA make a new single PCB design, are they stuffing 2 thin water blocks into it, or am I off my rocker?
 
As much as I think it's a good thing they innovate, one has to wonder... whats the point? It's no different then a regular GTX295 other than a single PCB; the performance will be the same?

Just makes you wonder when the new GTX300 or whatever theyre going to be named series of cards are just around the corner

With the waterblock cooling solution you can drop the card down to a 1U solution. Hello 6x 295's in P6T6 Workstation:

ShowImage.axd



+

6x
waterblock_banner.jpg



==


491px-Heart_left-highlight_jon_01.svg.png
 
As much as I think it's a good thing they innovate, one has to wonder... whats the point? It's no different then a regular GTX295 other than a single PCB; the performance will be the same?

Just makes you wonder when the new GTX300 or whatever theyre going to be named series of cards are just around the corner

They did it because supposedly they weren't making any money on the 295 due to the cost to manufacture. The single card uses less and cheaper components no more Volterra so you can't use the software voltage tuner with the single pcb card. It's a downgrade in every respect except for the fact it's 1 card now and can be single slot if watercooled.

Problem is if your watercooling your going to want to use the software voltage tuners to get those killer overclocks so your going to want the dual pcb version anyways.

This card is a big fail IMO.
 
Isn't the 295 a dual pcb design? Did EVGA make a new single PCB design, are they stuffing 2 thin water blocks into it, or am I off my rocker?

All NVIDIA partners will have the single PCB design. It is not an EVGA exclusive.


Looks like a dual-slot graphics card to me. Good luck getting six of those dual brackets into a regular ATX case.
 
All NVIDIA partners will have the single PCB design. It is not an EVGA exclusive.



Looks like a dual-slot graphics card to me. Good luck getting six of those dual brackets into a regular ATX case.

The picture is insufficient, I'll admit. From one angle it could be dual slot, from another that could just be the bracket...
 
anybody know if they will allow a stepup from a regular 295 to a co-op 295?

Why? The regular edition is more expensive (I don't know if EVGA offers credit with a step-down), core clock is the same, and memory is just a few ticks higher, surely easily attained with the standard GTX 295 and the overclock utility.
 
The picture is insufficient, I'll admit. From one angle it could be dual slot, from another that could just be the bracket...

Well, if the card itself was truely a single slot, then why would they NOT put a single slot bracket on it?
 
It's single slot with the waterblock. BFG's single PCB has a single slot bracket on it. Why EVGA is using the dual slot bracket I do not know.
 
Back
Top