- Joined
- Jan 1, 2005
- Messages
- 9,720
This is a blatant attempt at a rip off....hopefully the offender gets fired.
I doubt he would be fired. If anything, he would be promoted for bringing in a lot of money, just like a sales associate would.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This is a blatant attempt at a rip off....hopefully the offender gets fired.
"Simple stuff" is relative. If the customer revealed that they had been inside the case moving stuff around and unplugging shit and replugging it back in, i would check the IDE cables
but if they tell you that they turned it on one day and got a No Boot Device found, checking the "simple stuff" really wouldn't entail checking to see if an IDE cable is loose (we always assume the customer is telling the truth as best as they can).
unless the coefficient of static friction between two pieces of plastic changed overnight, i'm not going to check for a loose IDE cable. i'm going to check if the HDD is recognized at all in a Bootable Disc Environment (which is on the geek squad MRI disc) or in another "mule" computer (which we have set up in each store). if it does show up there, i'll try repairing the windows installation with the windows Recovery Console (fixmbr, chkdsk, fixboot, etc.)
the fact of the matter is that these news investigations are 1.) isolated incidences and 2.) tricks. if you mislead a technician with false information, they're likely to find a false cause to your problem. still, in this case the technician was lazy and didn't even bother to check just in case. they should have still been thorough.
there was a kid i worked with who was lazy and arrogant and thought he was running the show even though he's only been working for like 7 months. he just got fired because he was so terrible. types of employees working at the geek squad also depends on the management at each store.
there's too many variables in these situations to just say that "Oh, the Geek Squad is terrible and a huge huge ripoff" after one news team rigs up a computer and investigates the technicians diagnosis.
Or they could just be morons, I think it's a combo of both.
Seriously though, there are simple-stuff checks, but when you work on a few hundred computers over the course of a couple months and not a single one of them had a "loose IDE" cable... or even a customer taking off the side-panel, it's silly to waste time checking things like that right away...
And it's very rare for the BIOS to stop seeing the HDD unless it's dead.
But we were always pretty thorough with testing, I know I tested some HDD's multiple times before determining they were bad...
One that puzzled me was somehow a HDD got set into PIO mode from DMA... the whole computer was slow as hell, HDD benchmarks were a couple megabytes a second. Anyways, did a little research on the googles and checked the BIOS and switched it back to DMA6, but I don't know how it got set to PIO in the first place. Oh well![]()
So simple stuff wouldn't entail popping open the case and taking 5 seconds to make sure everything is plugged in? I stopped reading what you wrote after you said that wasn't simple.![]()
if a computer is working one day, and then it's not working the next, and the customer only says "all i did was turn it off one night and then i tried to turn it on the next day and it didn't work," then it's EXTREMELY unlikely that the IDE cable unplugged itself overnight unless the coefficient of static friction between two pieces of plastic changed as well.
for all of the computers i've worked on at the geek squad, i have never seen a problem arise from an IDE cable that was unplugged. VERY unlikely.
it's RELATIVE.
no, it wouldn't because it's all relative to the situation. in some situations, simple stuff entails popping in a bootable disc environment to see if the drive is even recognized. if a customer is being completely honest with you and they don't mention anything about them opening up the case and fiddling with something, then i'm not going to check something that isn't going to unplug itself over night.
maybe if you actually read the rest of my post you would actually understand where i was coming from rather than being deluded by your own arrogance.
So? It's still stupid not to check the hardware first. No matter what you're told.
Makes me wonder though, why are we doing an in depth discussion on how Geek Squad could have gotten it SO wrong when all the others knocked it out no problem?
It seems the others did the simple thing, so why exactly are we arguing for Geek Squad?
if a computer is working one day, and then it's not working the next, and the customer only says "all i did was turn it off one night and then i tried to turn it on the next day and it didn't work," then it's EXTREMELY unlikely that the IDE cable unplugged itself overnight unless the coefficient of static friction between two pieces of plastic changed as well.
for all of the computers i've worked on at the geek squad, i have never seen a problem arise from an IDE cable that was unplugged. VERY unlikely.
it's RELATIVE.
Yea, its all relative if the customer is being 100% honest. 99% of the time customers do not tell you every thing, even if its just by accident.
it's not THE geek squad's fault. it was that employee's fault for being an idiot. it's not that all geek squad employees have a combined consciousness simply known as The Geek Squad which is in control of all geeks at the best buy stores. for a situation like this, it mainly boils down to the employee, NOT the company.
Thats what I like to hear, the crazier the better. Good stories, but you should come out of retirement for more.
It's honest people like you that get crushed in this capitalist machineThis all makes me sad because I live in Salem, OR & being a computer nerd things like this shouldn't happen. TBH, in the free-lancing aspect I never even asked for a tip, I even refused any money because I feel what we can do is a gift in a way.
Some people just can't learn computer tech, but stories like these make me feel I can charge $10/hour for work and make a killing by just using craigslist