about to pull the trigger, welcome critisism.

Joined
Dec 13, 2005
Messages
3,588
Ok, got a build ready to pull the trigger on this gaming rig for my brother, but I am open to some suggestions. , but would like to keep it around where it's at.

1) What will you be doing with this PC? Gaming? Photoshop? Web browsing? etc
Mostly gaming
2) What's your budget? Are tax and shipping included?
about $1100 after shipping
3) Where do you live?
Aiken, SC 29801
4) What exact parts do you need for that budget? CPU, RAM, case, etc. Please be very specific.
case, mobo, cpu, ram, gpu, hd, optical drive, hsf
5) If reusing any parts, what parts will you be reusing? Please be especially specific about the power supply. List make and model.
BFG ES series 800W PSU, I have 2GB of Corsair (CM2X1024-6400C4DHX) that I would like to combine with another 4GB (2x2GB) for a total of 6GB if possible
6) Will you be overclocking?
[H]ell yes!
7) What size monitor do you have and/or plan to have?
currently a 20.1 benq lcd (1680*1050), plan on upgrading later
8) When do you plan on building/buying the PC?
ASAP
9) What features do you need in a motherboard? RAID? Firewire? Crossfire or SLI support? etc.
not an ASUS mobo. (had a bad experience with the last one, long story)raid 0, sli is not nessesary, but would like to run multiple monitors on another gpu later on, e-sata would be nice.
10) Do you already have a legit and reusable/transferable OS key/license?
yes. but will be running windows 7 when released.

Here's what I got so far.

Antec 1200- $154.99
http://www.newegg.com/Product/Product.aspx?Item=N82E16811129043

Intel e8400- 164.99
http://www.newegg.com/Product/Product.aspx?Item=N82E16819115037

gigabyte ga-ep45- 134.99
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128358

S1283 HSF with bolt-through kit. - $33+8.50
http://www.newegg.com/Product/Product.aspx?Item=N82E16835233003
http://www.newegg.com/Product/Product.aspx?Item=N82E16835233019

(2x) g.skill 4GB --- $91.98
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231122

liteon dvd burner sata 27.99
http://www.newegg.com/Product/Product.aspx?Item=N82E16827106280

evga gtx260 216 cores $239.99
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130434

(2x)Western Digital Caviar SE16 WD6400AAKS 640GB
- $149.98
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136218
--------------
Shipping to 29801
$39.51
-------------------
Total for now
$1003.38
I really like the antec 1200, but open to suggestions, I want it big, roomy, good cooling, with room for lots of future hard drives. silence is not necessary.

So, what do you guys think??

UPDATEs:: ditched the tuniq, for the xigmatek s1283. ditched corsair ram for gskill
 
Get the S1283 HSF with bolt-through kit.

Maybe HAF 932 over the 1200 case, which mobo are you getting? UD3R or UD3P?

Oh, and consider a 4850x2 over the 260.
 
1) Looool, you can get 6GB of DDR3 ram for that price. http://www.newegg.com/Product/Product.aspx?Item=N82E16820231226
2) GTX260 with Mirror's Edge, same price same product http://www.newegg.com/Product/Product.aspx?Item=N82E16814130448
3) S1283 HSF
4) Why exactly do you need raid? Just cuz it sounds good and people keep mentioning and discussing it?


1) i think you gave me the wrong link, this is what you are refering to?
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231223 $110

that's fine and all, what mother board would you suggest that supports the cpu i have selected, and supports ddr3 then?

2) own mirrors edge, beat it. nuff said.

3) I'll look into that.
4) do not need; want.. the speed difference is noticeable. i've ran raid 0 before, no problems. my brother likes the idea. it's not mandatory, but a possibility.
 
Which build are you going with?
I might add that the one I suggested is more powerful than the one in the OP.
 
Instead of the HDDs you have selected I'd go with the WD6401AALS drives, same ones Drakan290 used in his build. They offer double the cache and 2 years more warranty than the drives you have currently selected for only $10 more in total.

As for Dual Core vs Quad Core, Dual Core is better for gaming right now (because of higher clock rates) but as game developers make their applications threaded more the Quad Core will be better. Though since you are overclocking I'd say go with Quad Core.

Remember with Raid 0 that if you lose one drive out of the two drives, then all your data is lost.
 
Instead of the HDDs you have selected I'd go with the WD6401AALS drives, same ones Drakan290 used in his build. They offer double the cache and 2 years more warranty than the drives you have currently selected for only $10 more in total.

As for Dual Core vs Quad Core, Dual Core is better for gaming right now (because of higher clock rates) but as game developers make their applications threaded more the Quad Core will be better. Though since you are overclocking I'd say go with Quad Core.

Remember with Raid 0 that if you lose one drive out of the two drives, then all your data is lost.

ok. sounds like I will switch to those then. thanks. still thinking about going quad core. I understand most games ATM don't fully take advantage of 4 cores, but much sooner than later they will. I'll run it over with my brother again before we purchase it.

it does look like the Q9400 is the best bang for the buck; how does it compare to the q6600 other than the obvious slight difference between clock speeds?? temps, oc ability, etc??
 
Draken290: the Gigabyte DSR3 mobo uses ddr3. Is the UD3P a good choice??

DS3R SUPPORTS ddr3, you can use either DDR2 or DDR3 on it, since 775 processors don't have an IMC, the memory controller is on the motherboard, which is why the northbridge coolers are so much more beefy on intel boards than on AMD boards.

IIRC Q9400 runs a bit cooler than the Q6600, and gives better overclocks than the latest revision, not to mention a faster FSB and a 45nm manufacturing process.
 
That's quite a sweet system you have put together there!

I personally don't like Lite-on for ODDs, Samsung make great drives and only $24 shipped or $27 for lightscribe!

If you plan to OC much and/or it gets hot where you are, I would maybe opt for the XIGMATEK HDT-S1284EE over the S1283. 4 heatpipes > 3.

Serious kick ass rig either way!:D

EDIT: BTW the 1200 is AWESOME and it is very quiet w/ fans on low, not bad until fans are at 85-90% IMO and I DO like silent rigs!
 
thanks for the comments, guys. I'm really excited for my brother on this build. he's still running an athlon64 3200, with 1 gb of ddr, and my old 8800gts 640, so this new rig is going to totally spank his old one. I'll talk to him more about the benefits and trade offs for the short term/long run with the quad core. keep the comments coming.
 
Well, think of the Q9400 as an E8400 with two extra cores, as that's what it is, it's not a 'true' quad like the Phenom or i7, it's two dual cores on the same Die.
So he'll get the same performance clock for clock with a Q9400 that he would with an E8400.
 
Well, think of the Q9400 as an E8400 with two extra cores, as that's what it is, it's not a 'true' quad like the Phenom or i7, it's two dual cores on the same Die.
So he'll get the same performance clock for clock with a Q9400 that he would with an E8400.

sounds reasonable to me. ultimately it will be up to him, though. I'll run it by him in the morning, and see what he thinks, then if all goes as planed, order time! thanks again.:)
 
DS3R SUPPORTS ddr3, you can use either DDR2 or DDR3 on it, since 775 processors don't have an IMC, the memory controller is on the motherboard, which is why the northbridge coolers are so much more beefy on intel boards than on AMD boards.

You can't use DDR2 RAM on that P45T-DS3R mobo. Look at the notches. It only has support for DDR3 RAM.

OP, do not get that mobo, I recommend sticking with your original choice of mobo, the GA-EP45-UD3P.
 
You can't use DDR2 RAM on that P45T-DS3R mobo. Look at the notches. It only has support for DDR3 RAM.

OP, do not get that mobo, I recommend sticking with your original choice of mobo, the GA-EP45-UD3P.

:eek:
I meant the DS3L
 
yeah, the mobo i first picked out has some really good reviews, (not just on newegg), and I think i'll stick to it.

I haven't made the changes in the OP for the better of the 650GB hard drives, but i'm definatly getting them. still going to get two, but not going to mess with raid 0 right away, as these are going to be much faster than his old school pata drives.

Sticking with a gtx 260, because i found out that he is soon go;ing to install the 8800gts 640 when he gets a couple more monitors. this way, he won't have any issues with amd/nvidia drivers not playing nicely together.

He really likes the antec 1200, and is willing to pay the price for it. (actually he's buying me one for putting his computer together) so, its in my best intrest, not to talk him out of it. lol ;)
 
Back
Top