2TB Hard Drives Soon?

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
According to the Chinese-language hardware site Expreview, 2TB Western Digital hard drives will be out next week. Grab the translator of your choice and hit the link for more details. I managed to grab this information using the site’s built in translator:

Last December, the etailer Czech Computer ever revealed Western Digital’s 2TB hard drive (Model: WD20EADS). Now, we finally get some exact information about this large-capacity drive. Coming from Western Digital’s Caviar Green Series, this hard drive features 32MB cache and 8.9ms seek time, running at 7200RPM or 5400RPM. It’s expected to have employed four single-platter 500GB disks.
 
WD is actually behind this time. :( Seagate is already shipping its 500GB-per-platter 7200.12 drives, meaning a 4-platter 2TB version isn't far off. WD's 500GB platters should also be first-gen.

By the same token, Hitachi has already used five platters in its original 1TB drives, so they could conceivably release 2.5TB drives in the foreseeable future. :eek:
 
5400rpm why would anyone actually want something that slow for something that large?
 
5400rpm why would anyone actually want something that slow for something that large?

Won't be that much of a performance loss considering how dense those platters will end up being.
 
What difference will browsing your pr0n at 7200 RPM vs. 5400 RPM make!? :confused:

But, I just can't browse porn fast enough!

Oh well, I'll certainly welcome 2TB hard drives even if they're 5400 RPM. I can never have enough storage.
 
Won't be that much of a performance loss considering how dense those platters will end up being.

I wonder if that is true. I haven't used 5400rpm drives in awhile. I know we had a few lingering around my work that made me think the machines was screwed up due to them running slow. Found they had 5400rpm drives, clone them to a 7200 and they ran a lot better. But they were also 20GB drives.

When it comes to something like a 2TB drive, I wonder if the plater density would reduce the performance loss to the point where the transfer rate of a 5400rpm drive would be almost equal to a 7200rpm drive.

I could see 2TB drives being very usefull on a file server or a database server. In which case you are going to want your read / writes to be as fast as possible. Even in a home environment, the faster you can copy data to / from your machine the better.

People liked to bitch about how slow vista copied files compared to xp, so that does mean that file transfer speed means something to people.
 
But, I just can't browse porn fast enough!

Oh well, I'll certainly welcome 2TB hard drives even if they're 5400 RPM. I can never have enough storage.

They are selling them in both 5400rpm and 7200rpm versions, or at least that is how I read that. I just was kinda surprised to see a 5400rpm drive being sold that wasn't for a laptop. That isn't something you see anymore.
 
They are selling them in both 5400rpm and 7200rpm versions, or at least that is how I read that. I just was kinda surprised to see a 5400rpm drive being sold that wasn't for a laptop. That isn't something you see anymore.

Actually, many (if not most) WD Green desktop drives are 5400 RPM. They're advertised as being "variable 5400-7200 RPM" drives; which is essentially marketing BS that allows them to mix 5400 and 7200 RPM drives for the same model numbers. Samsung also has a 5400 desktop drive on NewEgg.

Not great for performance, but decent enough for mass storage.
 
5400rpm why would anyone actually want something that slow for something that large?

These drives alter their speed between 5400 and 7200 RPM based on load in order to conserve power.

That said I have lost two V2 "GP" series 750GB units in my server so far. Yay for WD awesome RMA process.
 
Actually, many (if not most) WD Green desktop drives are 5400 RPM. They're advertised as being "variable 5400-7200 RPM" drives; which is essentially marketing BS that allows them to mix 5400 and 7200 RPM drives for the same model numbers. Samsung also has a 5400 desktop drive on NewEgg.

Not great for performance, but decent enough for mass storage.

It is not marketing BS. The drives actually throttle based on load.
 
Hmm... personally I don't think I'll go above 1TB per drive for my PC. In case of drive failure, loosing all 2TB on a single disc compared to only 1TB on a 1+1TB setup :p

its probably silly but its something I've been doing for sometime. spreading my storage over 2 or 3 drives.
 
This is relevant to my interests.

fnl09_23.jpg
 
When it comes to something like a 2TB drive, I wonder if the plater density would reduce the performance loss to the point where the transfer rate of a 5400rpm drive would be almost equal to a 7200rpm drive.

Well, if speed drops from 7200 to 5400rpm the disk is moving at .75x it's prior speed. For the same number of bits to travel under the read head in a period of time as with the 7200rpm drive, the density must be 1.3333x higher on the slower platter. That would make a 500GB platter @ 5400RPM equal to a 375GB platter at 7200RPM. I assume current 1.5GB drives are 375GB*4? That would make the two drive equal speeds.
 
Well, if speed drops from 7200 to 5400rpm the disk is moving at .75x it's prior speed. For the same number of bits to travel under the read head in a period of time as with the 7200rpm drive, the density must be 1.3333x higher on the slower platter. That would make a 500GB platter @ 5400RPM equal to a 375GB platter at 7200RPM. I assume current 1.5GB drives are 375GB*4? That would make the two drive equal speeds.

It's a bit more complicated than that, but if you check out reviews on the current WD Green drives, they don't perform poorly, certainly in excess of the typical uses of mass storage.
 
Well, if speed drops from 7200 to 5400rpm the disk is moving at .75x it's prior speed. For the same number of bits to travel under the read head in a period of time as with the 7200rpm drive, the density must be 1.3333x higher on the slower platter. That would make a 500GB platter @ 5400RPM equal to a 375GB platter at 7200RPM. I assume current 1.5GB drives are 375GB*4? That would make the two drive equal speeds.

That makes little sense in this context I mentioned, as we would be talking about 2 drives with equal platters. A 2TB 5400rpm drive with 4 500GB platters, and a 2TB 7200rpm drive with 4 500GB platters. Now, it has already been pointed out that I was wrong in thinking there were 2 drives and there is actually only 1, a drive that slows down to 5400rpm when under no or light load and spins up to 7200rpm when needed. That would have been 5400rpm to 7200rpm instead of 5400rpm and 7200rpm.

Ignoring the fact that there isn't actually 2 drives, and looking at Tekara comment about how the loss being very little due to the density. Your post there is very true in regards to actual speed of the disk being able to read and write the bits. But you also have to look at transfer rate of drive, which is something that I didn't think about at first. When it comes to actual preformance would a 2TB disk spinning at 5400rpm all the time actually be .75x the transfer rate of a disk spinning at 7200rpm all the time? Or would the drives hit some limit of how fast they can transfer the data to the point where the additional speed of spinning the disk would play little part in the preformance. Not that any of that really matters though as they aren't selling a drive that runs at only 5400rpm.


All that said, being a drive than can speed up and slow down as needed would probably have less effect on preformance than my orginal thought of a drive that spun at 5400rpm all the time. Although I have to wonder, especially after seeing the post made about somebody having 2 750GB drives go bad on them, if that might not also increase the possiblity of failure due to all the spinning it faster then slower then faster then slower then faster then slower.... While I don't expect that to happen that quickly, I still could see it increasing the failure to some extent.
 
Forums still broken? Trying to quote your post, Exavior:

That makes little sense in this context I mentioned, as we would be talking about 2 drives with equal platters. A 2TB 5400rpm drive with 4 500GB platters, and a 2TB 7200rpm drive with 4 500GB platters. Now, it has already been pointed out that I was wrong in thinking there were 2 drives and there is actually only 1, a drive that slows down to 5400rpm when under no or light load and spins up to 7200rpm when needed. That would have been 5400rpm to 7200rpm instead of 5400rpm and 7200rpm.

Ignoring the fact that there isn't actually 2 drives, and looking at Tekara comment about how the loss being very little due to the density. Your post there is very true in regards to actual speed of the disk being able to read and write the bits. But you also have to look at transfer rate of drive, which is something that I didn't think about at first. When it comes to actual preformance would a 2TB disk spinning at 5400rpm all the time actually be .75x the transfer rate of a disk spinning at 7200rpm all the time? Or would the drives hit some limit of how fast they can transfer the data to the point where the additional speed of spinning the disk would play little part in the preformance. Not that any of that really matters though as they aren't selling a drive that runs at only 5400rpm.


All that said, being a drive than can speed up and slow down as needed would probably have less effect on preformance than my orginal thought of a drive that spun at 5400rpm all the time. Although I have to wonder, especially after seeing the post made about somebody having 2 750GB drives go bad on them, if that might not also increase the possiblity of failure due to all the spinning it faster then slower then faster then slower then faster then slower.... While I don't expect that to happen that quickly, I still could see it increasing the failure to some extent.

I don't know of a drive that can saturate its SATA connection so transfer rate would not be a limiting factor. For sequential reads and writes, I would expect a 7200rpm drive to always outperform a 5400 one. But that only matters if you are copying large files (and how fast do you really need that backup to be?). Seek time is king for small files and if you're playing back media, well, you can only view and listen at 1X speed, right?

I'm looking forward to getting a 2-platter 1TB drive. Less noise, power, heat, and fewer parts to fail. That's why I opted for the 640 WB Black Caviar drive over the 3-platter 1TB version. A 1TB Green will be a perfect media/backup companion.
 
There is no need for 2tb hdd's! Why can't they just focus on making reasonably sized fast hdd's?just shove 500gb on one platter and that's it. then focus on the memory controller and throughput speed. Lets see some drive max out sata for once!
 
There is no need for 2tb hdd's! Why can't they just focus on making reasonably sized fast hdd's?just shove 500gb on one platter and that's it. then focus on the memory controller and throughput speed. Lets see some drive max out sata for once!

I have plenty of need for 2Tb drives, and have been waiting since December for these. Also, they do have a 500GB single platter drive. I believe Seagate produced one and I thought I saw it on Newegg last week.
 
yeah, but it ain't fast enough. nothing in comparison to the fastest ssd's

With these it is not about speed, it is about quantity, I (like many probably) just need mass storage and not really worried about speed. Solid state drives are moving along nicely, but need to stay slow so we, as users, get the best speed, reliability, and storage space.
 
There is no need for 2tb hdd's! Why can't they just focus on making reasonably sized fast hdd's?just shove 500gb on one platter and that's it. then focus on the memory controller and throughput speed. Lets see some drive max out sata for once!

high definition media-less HTPC library
 
These 2TB drives were rumored to be out this week. Has anyone seen/heard any updates on this? I'd love to get one.
 
There is no need for 2tb hdd's! Why can't they just focus on making reasonably sized fast hdd's?just shove 500gb on one platter and that's it. then focus on the memory controller and throughput speed. Lets see some drive max out sata for once!
Says you. 2TB drives would allow me to buy two 2TB drives and replace all my storage drives 1.5TB/2x750GB/80GB (Which are already full) and still have almost another 1TB for more data. Less drives in my system equals, less heat and less noise.
 
I'd ditch this Seagate 1.5TB just for the WD brand at the moment. I wonder what the 2TB price will be?
 
Back
Top