Questions about Swapping Motherboard

solaris54

2[H]4U
Joined
Jul 14, 2007
Messages
2,218
I have replaced just about everything else on a computer but never the motherboard.

I need to remove a EVGA 750i mobo and replace it with a EVGA 780i FTW mobo. I will use all of the existing parts and just move them over to the new mobo.
I dont think I will have any problem doing the actual swap. My concern is starting the computer after I do the swap as far as posting and any other adjustments that might be needed. What would be the procedure for starting the computer after installing the new mobo if any? I did a search online for a procedure but didnt see anything that recent.

Windows Vista 64 is currently installed can I just leave that on the hard drive or does it have to be reinstalled?
 
I'd reinstall Vista. Either way you will have to talk to Microsoft. They will give you a security code to reinstall your copy on your new hardware. The reason I'd re-install is from nightmares about driver conflicts.
 
This has been discussed many times. It is always better to reinstall. However if you stay with the same chipset manufacturer. In your case Nvidia you should be fine. I have done this many times and it works fine. Just install the correct chipset drivers after the swap, you will also want to reinstall your video drivers.
 
But in case you have an unstable OS despite using the same chipset manufacturer, just reinstall.
 
Ok so I dont need to make any adjustments in the BIOS or anything with the new mobo?
Just install it and then start it?

Leave the same OS installed and see what happens?
 
Yup. Well, as far as the BIOS goes, you'd probably want the same settings as before, no?
 
Back
Top