Help! Pop was spilled into my cpu

jbindon36

n00b
Joined
Jul 22, 2008
Messages
6
Okay so, this is possibly the worst and most random thing that could happen... I had a glass of pop sitting on my desk, and one day while I was gone my cat knocked it over, it spilled off of my desk, and into the top of my case where there is a huge fan (I have an antec nine hundred case). The pop was then sprayed all throughout my case since it was running when this happened... It was turned off when I got home and I just pressed power to turn it on when I saw that it was off, thinking there was just a brief power outage or something. It made a zap noise and would not turn on (that's when i noticed the drink had been spilled). So after all this I guess my question is... How do I know which parts are bad and how can I test them? When I plug the power in, the blue LED lights turn on, leading me to believe the power supply is still good. I get a blue light on the motherboard and if I try to power on, a yellow light appears on the mobo. Any help you can give me would be greatly appreciated. I built this cpu about 3 months before this happened and it was a HUGE upgrade to what I was using... I would love to get it back up and running!
 
Wow that's pretty bad, too bad it wasn't caught on video. I guess your cat didn't feel like it was getting enough attention and decided to eliminate the competition ;)

If you haven't done this already you may want to take out the motherboard, memory, cards, and cpu if you think it got wet. Set them on a table and let them completely dry out, then do a quick visual inspection looking for burn marks from a short.

If you have another similar machine you could test parts one at a time, if you don't you may have a tough time narrowing it down between motherboard and cpu assuming one got killed. Make sure it's completely dry before doing anything else.
 
well I still have my old piece of crap machine but I bet the parts would not work in there... I will try taking them out and inspecting them. Thanks
 
Drying will not help those parts.

When the soda liquid evaporates, it is going to leave behind all kinds of shit on the electronics.

I almost want to say your best bet would be to rinse them off best you can and let them dry.
 
Help! Pop was spilled into my cpu

Thats physically impossible. :rolleyes: Why do people call their computer a cpu?!? A cpu is useless without the rest of the parts, and it takes all those parts to create a computer. :mad:

But the only way to test things, after thoroughly cleaning them, is to try them in a known working system. I hope you have willing friends, lol, or another PC.
 
with the configuration of that case, I'd be willing to bet with almost absolute certainty that your PSU is baked. You could test it on your old rig to see if it fires up, but unless you have a EE, DO NOT OPEN YOUR PSU. The charge left in the capacitors can be anough to send you to the hospital. As for the rest of the parts...I think a complete system disassembly is in order. I'd personally take all of your parts out of the case, and set up like a 13x9" Pyrex pan or something, and fill it with rubbing alcohol (isopropyl 90% would be great). Get an old nasty toothbrush too. Remove all of your heat sinks, and literally dunk your parts, as much as possible, into the alcohol bath. DO NOT SUBMERGE YOUR DISK DRIVES THOUGH (opticals or hard drive). Those will have to hopefully just do with wiping down the exterior. After you scrub all of your parts, I'd let it air dry for at least 8 hours (prefer more like 24), and then put it all back together and see if it will fire up. Cross your fingers.

Personal note - sell the cat to recoup any costs for having to replace parts that were killed by soda.
 
with the configuration of that case, I'd be willing to bet with almost absolute certainty that your PSU is baked. You could test it on your old rig to see if it fires up, but unless you have a EE, DO NOT OPEN YOUR PSU. The charge left in the capacitors can be anough to send you to the hospital. As for the rest of the parts...I think a complete system disassembly is in order. I'd personally take all of your parts out of the case, and set up like a 13x9" Pyrex pan or something, and fill it with rubbing alcohol (isopropyl 90% would be great). Get an old nasty toothbrush too. Remove all of your heat sinks, and literally dunk your parts, as much as possible, into the alcohol bath. DO NOT SUBMERGE YOUR DISK DRIVES THOUGH (opticals or hard drive). Those will have to hopefully just do with wiping down the exterior. After you scrub all of your parts, I'd let it air dry for at least 8 hours (prefer more like 24), and then put it all back together and see if it will fire up. Cross your fingers.

Personal note - sell the cat to recoup any costs for having to replace parts that were killed by soda.

He expanded on what I said.
Thanks sabre.
 
awesome thanks a ton. im going to try dunking them in isopropyl this weekend. I checked prices of the parts I'm pretty sure are dead and they have gone down a ridiculous amount since I bought them 4-5 months ago so thats a plus :)

As for the cat...it is a $900 cat so it's almost the same price as the computer. The owner of the cat offered to pay for any new parts I might need and in return I was not allowed to murder the damn thing :rolleyes:
 
I don't actually know the best course of action here since I've never had to deal with a soda soaked motherboard, but one thing I'll mention is you might want to consider distilled water or at least test the alcohol before submerging anything as isopropyl alcohol can strip off paint and soften some plastics.
 
awesome thanks a ton. im going to try dunking them in isopropyl this weekend. I checked prices of the parts I'm pretty sure are dead and they have gone down a ridiculous amount since I bought them 4-5 months ago so thats a plus :)

As for the cat...it is a $900 cat so it's almost the same price as the computer. The owner of the cat offered to pay for any new parts I might need and in return I was not allowed to murder the damn thing :rolleyes:


clean your parts, see if any still work. give the cat back for the cost of a new computer. it's called extortion, and in this case, justified extortion. :D
 
I don't actually know the best course of action here since I've never had to deal with a soda soaked motherboard, but one thing I'll mention is you might want to consider distilled water or at least test the alcohol before submerging anything as isopropyl alcohol can strip off paint and soften some plastics.

This is another option. Keep in mind that my concern behind this idea is that distilled water evaporates slower than alcohol. The distilled water is only non conductive as long as it doesn't touch air, and ionize itself. Well, unless he has a sealed environment, I highly doubt that will help him much, as he needs to breathe air to survive...and clean the parts in question. That all being said, you also have to consider that the water (or alcohol) for that matter can (and will) get into the small cracks (that's the point) in between the platics seals on the capacitors, resistors, etc that are on the components. The difference is that alcohol will likely do a better job of removing any foreign residue in these small spaces than water will (assuming that in these small spaces, you cannot reach to scrub with the toothbrush).

I will concede the point though that the alcohol can possibly damage rubber/plastic components, specifically seals that may be present. At this point though, I do feel that if he does not attempt to clean what he can, it will be an almost total loss of the parts, and that water may likely do more damage (in the attempt to clean the parts) than the soda already did.

Distilled water is great for WC loops, not for cleaning electronics. I would be concerned that the water may get trapped under a plastic wrap around a capacitor, and not dry out before he attempts a power on. In that case, you may even start a fire, which is never good.

All I will say is that if you decide that water is the safer way to go, I'd personally recommend that you allow up to 1 week for drying time.

Which ever way you decide to handle it, be careful! Good luck!
 
*Bump

Okay so I determined that the mobo was completely dead... I just got the new one in the mail and am switching it out on Sunday. The processor had this thermal paste installation thing the 1st time we put it in... Does anybody know how to properly remove the processor and will I need to buy new thermal paste to install it on the new motherboard?
 
yes you will need thermal goo. Can buy it at any computer store ( no not bestbuy etc)

1)remove heatsink/fan
2) undo 775 spring
3) pull out cpu.
4) clean it.
 
use 91+% isopropyl alcohol, coffee filter, and a CC to clean off the old thermal paste.
 
I also use coffee filters & rubbing alcohol to clean the thermal compound off parts. They're great for that purpose. They're super cheap and pretty much lint-free.
 
Yeah Soda is one of the worst things to spill inside a system (although anything that doesn't evaporate like alcohol or isn't anti-static inducing is bad), I'm guessing since it hit the fan literally, your board is fried, PSU possibly since it's at the very bottom, seeing as it came through the top fan and worked down it could have killed everything attached directly to the board, the CPU might be okay since it's under a heatsink.

I'd get a new board first and see how that goes, just put in the CPU and the RAM first, if you get a no video error noise, then stick the video card in and then see what happens.
 
i use dirty socks and cross my fingers...
i dont drink coffee and barely know what a coffee filter is lol

I don't drink coffee either, but they're easy to come by (work, neighbor, etc). A dirty sock? to each his own. ;)
 
update:

I swapped the motherboard out and powered on without the video card in. Everything seemed to work...the fans were goin and it sounded like a normal startup. However when I put the vid card in I tried to power on and nothing happened. The fans didn't turn, nothing. I was thinking "oh sh*t i just fried another motherboard." After I took the vid card out I powered on and everything was working again. I just ordered a new video card and should be putting it in on Wednesday... Do you think anything was damaged when I tried to power on with a bad video card in?
 
Back
Top