HDD Enclosure not allowing computer to boot properly

blade12

Limp Gawd
Joined
Dec 29, 2005
Messages
346
Hey, I just got a new Kingwin IDE enclosure http://www.newegg.com/Product/Product.aspx?Item=N82E16817146307 and it is causing problems. When I have it plugged into the USB slot and try to start my computer, it doesn't go past the bios screen. Computer just gets stuck in a reboot cycle at the main bios screen until I remove the USB wire with the enclosure. I have a Gigabyte EP-43 mobo and kind of out of ideas about what could be wrong exactly. There is a driver for it that came with the enclosure but it is only for windows 98SE; for windows xp it is supposed to run right after you connect the enclosure. The keyboard/mouse/heatset are all connected to USB sockets behind the pc and none of them stop my computer from booting.
-I don't know whether the pin behind the hdd on the enclosure has to be slave or master. Should I remove that pin or does it have to be in master? If any more info is needed, let me know.
 
There should be an option in your bios to enable/disable boot from usb...try disabling it
 
Lot of external enclosure manufacturers cut corners on the controllers in those things, which causes problems with some large drives and/or old motherboards. Or if a drive is not operating reliably it can make it even more flaky during use.

As for jumper I usually just use cable select in an enclosure, don't know if it would make a difference in that enclosure or not, some have instructions telling you to set it a certain way and others don't.

Previous poster has the right idea, try changing boot order so your os drive is first (or second behind optical) and change "boot other device" to disabled.
 
Lot of external enclosure manufacturers cut corners on the controllers in those things, which causes problems with some large drives and/or old motherboards. Or if a drive is not operating reliably it can make it even more flaky during use.

As for jumper I usually just use cable select in an enclosure, don't know if it would make a difference in that enclosure or not, some have instructions telling you to set it a certain way and others don't.

Previous poster has the right idea, try changing boot order so your os drive is first (or second behind optical) and change "boot other device" to disabled.

I actually have it set to boot from harddrive for all 3 boot order things. There is also a option for USB harddrive but I didn't do that. i will check bios again to make sure though.

The manual that came alongside says to format the enclosure through MS-dos prompt if nothing shows up in my computer. Unfortunately, I have irreplaceable music on it and I would REALLY hate to lose the music by formatting. I am going to see if I can get it to work on another computer.

edit: I think I may have found how to fix it. In the motherboard manual, one of the things say "Legacy USB storage detect. Determines whether to detect USB storage devices, including USB flash drives and USB hard drives during the POST." I am going to disable it. But again, even if my computer boots up with the HDD in without a problem, it STILL probably won't read the harddrive.... I am trying this tho so got my fingers crossed.
 
Having two active boot/operating systems that a BIOS can 'see' when booting is nothing but trouble.

Eliminate the unwanted copy (folder) of XP, and you should be good to go.

It won't effect your music or anything else.
 
Having two active boot/operating systems that a BIOS can 'see' when booting is nothing but trouble.

Eliminate the unwanted copy (folder) of XP, and you should be good to go.

It won't effect your music or anything else.

That harddrive doesn't have windows XP on it. It just has lots of music and a bunch of backup ISOs taking up a total of 60 gigs. The priceless music alone is the reason why I bought this enclosure. Anyways, I disabled the 'legacy USB storage detect' and my computer POST'ed without a problem. Now I just have to figure out how to get it to show up in My Computer and I am all set. I just sent a email to Kingwin and lets see what they respond with. If anybody has any ideas, feel free to post.
 
Iss there a reason for needing the USB device connected at boot?

Not really. I just won't be carrying this device around everywhere I go so I might as well keep it connected. Anyways, I tried connecting the usb after the computer started up and it still wouldn't show up in 'My Computer'. For a lot of the other people in the newegg reviews, the harddrive showed up RIGHT after the enclosure for connected to their PCs.
Honestly, I am not sure what could be wrong. It would be a big time hassle returning this enclosure back to newegg for replacement but I may have to do it eventually. Perhaps I will just get it replaced for a completely different enclosure.

I still have another option, which I should have and I still could go after. Since my motherboard has only 1 IDE wire connecter, I am able to connect 2 hardwares to it. I could just get some external USB dvd-burner OR a SATA dvd-burner and go that way. ATM, I got my 120GB IDE HDD connected and my current dvd-burner to the IDE cable(which can only allow 2 items) http://www.newegg.com/Product/Produ...005+1036506653+1038406820+4093&name=$10+-+$25
I am a fool for thinking that the HDD USB enclosure would be a better option than getting one of those SATA dvd-burners. Honestly, I think I may have wasted my time and money with this enclosure..
 
I guess I'm a little confused, I had assumed this was a drive you used regularly in some machine and just recently decided to put it in an enclosure and keep using it.

(Some things to clarify)
When was the last time you successfully used this hard drive?
Was it in this machine or another machine?
Does the drive work normally if you plug it straight into the motherboard without the enclosure?
 
I guess I'm a little confused, I had assumed this was a drive you used regularly in some machine and just recently decided to put it in an enclosure and keep using it.

(Some things to clarify)
When was the last time you successfully used this hard drive?
Was it in this machine or another machine?
Does the drive work normally if you plug it straight into the motherboard without the enclosure?

1) I used this harddrive about 3-4 weeks ago before my old motherboard died and I had to buy new mobo/cpu/ram.
2) refer to #1
3) It was working perfectly good before. Just to make sure that that it isn't the drive, I may try a couple other older HDDs and see if any of them work in this enclosure.
 
In order for a external enclosure to be recognized, the drive usually has to be set to master, such as an optical drive or hdd. usb-to-ide cables usually need to have devices set on master for xp to recognize them and boot from them. i have a 2 vantec usb to ide cables which require the drive to be set as master.
 
I got it working. It was the damn jumper causing the problems(Never expected that to be the culprit in this case). Anyways, I tried another harddrive that had no jumpers at all and it worked perfectly so I assumed the hdd I was trying to work was the problem. To test the theory, I removed the jumper and tried it without the jumper. It works perfectly. All the files are still there so I am in good shape. Thanks for all the help ;)
 
Back
Top