Trying to buy used "data server"... suggestions?

danyal711

Limp Gawd
Joined
Jul 9, 2004
Messages
205
I am trying to buy or worst case build a data server for home.

My criteria so far is (in no particular order);

1) Reliable power supply
2) Minimum 6 bays/slots for hard drives (It is possible for the case to support 3 hdds and then I can get an 2 -> 3 sata bay converter for the 5.25" bays)
3) ECC ram?
4) Efficient (lowest power consumption possible as it will be running 24/7)
5) Good airflow so that hdds dont overheat
6) $250 or less (see below)

Data which is written to this server will very rarely be modified however will be frequently read.

I was trying to buy a Dell SC440 (~230 bucks) but unfortunately that deal fell through. So, now I am trying to figure out what the best option is. I could also buy something like a Dell PowerEdge 2500 off ebay... those seem to be pretty cheap, but im wondering if the 3 PSUs will use tons of power and is overkill?

Anyone have suggestions as to which used/new servers would be best suited for my use?
 
You could do this case (I put my home server in one, it has 5 x 3.5" bays with rubber mounts for the drives and a 120mm fan mount infront of the drive cage ) - http://www.newegg.com/Product/Product.aspx?Item=N82E16811147044
With Adapter - http://www.newegg.com/Product/Product.aspx?Item=N82E16811147044
This PSU (low cost, I've had a few and never had one die on me yet) - http://www.newegg.com/Product/Product.aspx?Item=N82E16817153023
This Fan for the HDD bay in the case - http://www.newegg.com/Product/Product.aspx?Item=N82E16835185028
That is all $114 so you still have some for a mobo, proc, and RAM. I would go AM2. The only Issue I see is getting enough SATA ports for your price range.
 
Yah... I really don't want to build it if I dont have to. Warranty etc becomes a big hassle IMO. I would much rather buy something pre-built new or used. The used stuff wouldnt have a warranty either but I feel like at least all the parts are matched up. Building always worries me even though I have built several computers over the years. I have always had small things go wrong with them in the long run.
 
What is your total budget? I assume $250 doesn't include the drives being used to fill all 6 bays.
 
I would like to spend $250 max for everything but the drives and sata card etc if I need more sata ports.
 
What about something like this: http://cgi.ebay.com/Dell-PowerEdge-...ZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem

Would dual 450 mhz cut it? I wanted to run XP but that might be pushing it. I could def run linux... im thinking.

I still have one of these running here. Though it is a P3 733 version with 1GB of RAM.
It works well for its age, though it had a PERC2 RIAD card that failed.

Also it will only work with SCSI drives so you will be spending a lot of $ on Drives and be limited to 300GB drives (at about $430 each). Good luck finding the drive cages for it to actually install those drives. For the cost of the drives you are better off getting a 2950 and putting desktop SATA drives in it.

PowerEdge 2900 III
Subtotal $1,039
1.6Ghz LV Dual Core
1GB RAM
1 x 80GB SATA
8 Drive bays.
 
As an eBay Associate, HardForum may earn from qualifying purchases.
Couldnt I just stick a sata PCI card in it and hook that up to my sata drives? Also regarding to drive cages, how does that work? Meaning, would I not be able to fit sata drives in those slots?
 
http://cgi.ebay.com/DELL-PowerEdge-...ryZ51215QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

--if you look at the pics could the black cage thing not fit a sata drive?


Also since you have one of these, is there any way you could check and see how much power it uses when idle... (you don't happen to have a Kill-A-Watt handy do you? ;) Thanks!

The drive cages are intended for hot swapping SCSI drive directly into the back plane. You would have to heavily modify the Server to even be able to route SATA cable to where drives plug in. Even then it will be a bitch to actually connect the drives to SATA. Look on Dell's site for the manual to get a better idea how it works. If I can dig it up I'll post a link.

As for a Kill-A-watt I can get access to one (or something similar), but we are using 220v power so I'm not sure how useful the data would be.
 
As an eBay Associate, HardForum may earn from qualifying purchases.
Hmm... interesting. By the looks of it, if I could remove the backplane and make sure the drives face in that direction then it wouldnt be too hard to hook them up? Obviously I might be oversimplifying since I haven't seen the physical setup.
 
If I get a chance I'll open it open and take pictures. Probably tomorrow as I'm home sick today :(
 
Hope you feel better. Thanks so much for your help. Also im not sure but I think wattage might be the same even if its 220V so the kill a watt reading would still be helpful. Do the PSUs have standard power connectors (the normal 4 prong kind)?
 
Thank you for the link to that case. That is either a rebandaged Antec or it is a copy of an Antec SLK3000B that was discontinued. I have been looking for another SLK3000B and couldnt find any.

Its very very close to the SLK3000B. I have both and like this one a little better since it doesn't have the front door that always gets in the way.
 
Its very very close to the SLK3000B. I have both and like this one a little better since it doesn't have the front door that always gets in the way.

Thanks for the info, I'll be purchasing one soon.
 
My brother has a few dual processor servers in 1u and 2u rack mount cases. You said server so I assumed you meant rack mountable. If you want a rack mount case, i'm sure he'd sell you a whole system for around $300. He just got them back from the data center.
 
I'd agree with everyone else here - check ebay, I found a couple of used NAS boxes fairly cheap. I'm pretty sure your biggest complaint with those style boxes will be drive interfaces (quiet a few are going to be scsi only or fibre channel which are very spendy). Enterprise boxes like those are also going to be load so keep that in mind, they'll also be expensive to power (electricity).

The better thing to do might be to build your own as this typically will be much cheaper in the long run - however you're not likely to get dual power supplies, ecc or the ease of implamentation a prebuilt box would give you.

The Norco Boxes are a great way to add a ton of drives to a system..

http://cgi.ebay.com/Norco-DS-1220-RAID-SATA-Rackmount-System_W0QQitemZ220214472212QQihZ012QQcategoryZ74941QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

http://cgi.ebay.com/12-bay-SATA-ESATA-HARD-DRIVE-STORAGE-RACKMOUNT-SYSTEM_W0QQitemZ220206420685QQihZ012QQcategoryZ150129QQrdZ1QQssPageNameZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem

Just imagine if you slapped in 12 x SAMSUNG Spinpoint F1 (1TB Drives)... Wow..

$249 @ NE http://www.newegg.com/Product/Product.aspx?Item=N82E16822152102
 
As an eBay Associate, HardForum may earn from qualifying purchases.
12 bay is overkill for me... 6-8 would be fine. Not to mention the 12 bay is way above my budget.

At this point the only 2 options i really have are building my own and using an enclosure like: http://www.bixnet.com/8usenfor3sah.html

That enclosure is nice but will also end up costing a bundle since I will have to get an additional PC to connect it to.
 
The link to the 'adapter' seems to be the same link as the case. What adapter do I need?

You could do this case (I put my home server in one, it has 5 x 3.5" bays with rubber mounts for the drives and a 120mm fan mount infront of the drive cage ) - http://www.newegg.com/Product/Product.aspx?Item=N82E16811147044
With Adapter - http://www.newegg.com/Product/Product.aspx?Item=N82E16811147044
This PSU (low cost, I've had a few and never had one die on me yet) - http://www.newegg.com/Product/Product.aspx?Item=N82E16817153023
This Fan for the HDD bay in the case - http://www.newegg.com/Product/Product.aspx?Item=N82E16835185028
That is all $114 so you still have some for a mobo, proc, and RAM. I would go AM2. The only Issue I see is getting enough SATA ports for your price range.
 
More than likely this was the adapter he was talking about:
Cooler Master STB-3T4-E1-GP 4 in 3 Device Module w/ 120mm Fan - $18

If worst comes to worst and you have to build the server, you can build a very nice server these days for $250:
AMD Sempron LE-1150 Sparta 45W CPU - $33
Gigabyte GA-MA74GM-S2H AM2+/AM2 AMD 740G HDMI mATX Motherboard - $70
Kingston KVR800D2N6/1G 1GB DDR2 800 RAM - $19
Corsair 450VX 450W PSU - $75
Cooler Master Elite 330 RC-330-KKN1-GP ATX Case - $45
---
Total: $242 Plus tax and shipping.

Reasoning behind some of my choices:
CPU: Should be enough for file sharing and has very low power draw
Motherboard: Cheapest motherboard I can find with 6 SATA ports that was good. It's also a mATX design with onboard graphics so it should use a small amount of power
PSU: It's 80+ efficient which should help lower power bills and draw. Also has plenty of power for a six drive server. And finally, it's a well known and well reviewed PSU.
RAM: 1G should be more than enough for file serving duties.
Case: Cheap but great case due to the front mesh design. A 120mm fan is right in front of 5 internal 3.5" drive bays. It can fit up to 7 drives alone if you use the exteral 3.5" to store some drives

That fits all of your requirements except for number 3.
 
That parts list looks pretty good. Actually I doubt I would even need a case that big. This case would seem to be able to store 5 drives in the 3.5" bays and then with the adapter another 5 in the 5.25" bays. What case is 1 step smaller than this and good quality (just so I can compare). Also, have you heard about the Antec green power supplies? Those are supposed to be very power efficient.
 
The Antec Green Power Supplies you're talking is their Earthwatts line of PSUs. Pretty decent Seasonic (albeit lower quality ones) made 80Plus efficient PSUs. With that said, there are usually better quality power supplies in their price or power output range. Though if you can find the Earthwatts 380W around $40, 430W around $50, and 500W around $60, they're great choices.


If you want something smaller, though the CM 330 is a small case IMO, go with this case and bracket combo:
Ultra Microfly mATX Case - $55
Lian-Li EX-23B Black 3in2 Internal HDD Kit w/80mm - $20
---
Total: $75 Plus tax and shipping.

With the bracket and if you use the external 3.5" bay as well, that case can fit up to 6 hard drives. Cooling should ok. It'll look something like this:
http://hardforum.com/showthread.php?t=1296249

The Ultra case and the Apevia case in the thread link above are similar except that the Ultra case doesn't come with a shitty PSU that can kill your system like the Apevia does.
 
Ok, after pondering, I want to go the Mid tower route you initially proposed. That way I will have room to expand + I will be able to install my dual bay tape drive :).

My only beef with the case you showed is the fact that the door seems to be the sliding type that is connected via screws. I would much rather get a case that is easy to open (slide and clicks shut) rather than having to unscrew each time.
 
Well unfortunately for you, a good majority of cases are like the CM 330 that I recommended.

However, I think the Sonata III is along the lines of what you want. It does have a locking mechanism so you really don't need to use the screws. However, the only problem with it is that it can only fit up to 6 drives if you use the 2 external 3.5" bays as well. But it does come with a very good PSU:
Antec Sonata III ATX Case with Antec Earthwatts 500W PSU - $90
 
Well, I ended up buying the CM330 and just finished putting everything in. Haven't booted it up yet though. Is it bad practice to connect all the components (HDDs, CD rom, tape drive, scsi card) before having booted it at all?

Also-- What is a good fan I could get for the front of the case / how do i know which direction to put it?
 
Personally, I'd try to boot with the bare minimum since it'll help diagnose any problems that may occur.

As for which direction for the fan, the open face side is the intake while the rear of the fan with the supports is the exhaust. There should be a little sign on the fan itself telling you the direction of the airflow. As for good case fan, pick up this case fan:
120mm Yate Loon D12SL-12 Case Fan - $3.50

Good luck on the rig!
 
Ok great, got the fan. I should have asked this before, but my logic is since the rear fan is blowing out, I was going to make the front fan suck air in and blow it across the drives? Is that correct?
 
Ok great, got the fan. I should have asked this before, but my logic is since the rear fan is blowing out, I was going to make the front fan suck air in and blow it across the drives? Is that correct?

Yes that is correct.

Have you booted up the server yet?
 
Yup just booted it up and installed windows. Still having a few problems booting after the install though, but I think it has to do with my master/slave config since my CD-ROM and OS drive are on the same IDE channel. Will look into it more tomorrow and post an update.

-Danyal
 
Back
Top