Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Yea, I haven't done anymore testing, it was prime stable for 2+ hours... @ 3.0ghz
I think I might have some bad vdroop, I set it to 1.275 and it showed as 1.210 in CPU-Z I believe
http://lousyhero.com/blaze/qcold.jpg
It's a G0, got it from Clubit a little before christmas...
Are there any aftermarket or tweaked BIOS's for the vanilla P5B mobo?
Can someone please tell me WHICH numbers I am supposed to change?
Hey guys,
I recently tried to overclock my E6750 to 3 Ghz and it worked. But I am wondering how low I can go with the voltage. I'm trying to undervolt it so I can get as low temperatures as possible. I'm currently on 1.25000 and it ran Orthos stable for 3 hours and 15 minutes and then I stopped the test, so no errors or what.
So I want to know how low I can go with the Vcore.
Thank you in advance,
Koifim
Plus, how can you run a FSB @ 333 MHz and your mem @ 800 MHz? That is using a divider I have never heard about.
333 and 800 would be 5:6.. maybe it's on your board, but not mine
Just experiment with the settings and keep an eye on your temps. If you're dialing in 1.5 in the BIOS but it's only delivering 1.0 in the o/s something is wrong. My board delivers what I dial into it. You might wanna see if that has been addressed in a BIOS update for your board or verify that it is some sort of safety mechanism.
Dude, you want a lower vcore, not a higher one. Re-reread the o/c'ing guide
New to all this and I need some guidance and details to overclock to 3.2 - 3.6ghz.
Something I should also note is that if youre using high memory dividers (a.k.a. running your memory in asynchronous mode), you might have to manually tweak your NBvore and your ICH vcore to get the memory to run stable. For example, I had to up the NB vcore by +2 steps and the ICH vcore had to be set to the maximum value or else I couldnt run my PC1066 memory at the higher dividers.
First off, WelcomeThis thread is for noobs and that's me
I am building the system in my sig this weekend but I know little of the 775 Intel format. Until now I have used AMD stuf.
This thread is for C2D and C2D Duals but I don't know if the CPU in my sig is that degination or not. Please advise. If it's not is there another link for the one I'll use?
http://www.clubit.com/product_detail.cfm?itemno=CA1938452
I'm looking for good water blocks for CPU and video coolers too. I've heard that Swifteck is good. Any others out there top of the line too?
What format do I look for? I've seen Maz3 etc.
Thanks!