EliteFantasy
Limp Gawd
- Joined
- Oct 4, 2004
- Messages
- 205
I am having a problem that I believe is related to the graphics card. I built a P4 2.8 Ghz SFF computer about 3 years ago. It had an AGP ATi graphics card in it. I sold it 2 years later to my sister when I bought a laptop.
Now, the screen would not get a signal sometimes. It got to the point that the computer eventually stopped the start-up beep as well. I had another power supply to check with so I know it was not that. My diagnosis was that a failing video card killed the motherboard.
I ordered an MSI NEO-V P4 board, a new ATX size case, A-Power power supply, and an XFX Nvidia 6200 AGP card. I have everything put together and it seemed to work fine. I tried the original video card and got 8 short beeps no matter how I reseated the card so it was definitely dead. I could not remove the old ATi drivers first because I needed a video card. After it was all up and running I removed everything ATi.
My problem is now that the screen will go blank for a couple seconds and then come back when I do something graphically. I figured out that setting the refresh to 75 Hz was doing it. I changed it to 60 Hz and it will still do it, but less now. It could not display the original screensaver smoothly so I changed it over to an easier one. If I make the screen flicker quickly a few times it will restart and say it recovered from a fatal error. If I leave it on for a long time doing nothing, the screen will go black and then say no signal, and it will not come back. Restarting it says it recovered from a fatal error.
Some thoughts I have are that the card I have is bad, the ATi drivers are still messing with it, or a program (like styleXP) is screwing it up. What can it be and how can I fix this?
Thanks.
Now, the screen would not get a signal sometimes. It got to the point that the computer eventually stopped the start-up beep as well. I had another power supply to check with so I know it was not that. My diagnosis was that a failing video card killed the motherboard.
I ordered an MSI NEO-V P4 board, a new ATX size case, A-Power power supply, and an XFX Nvidia 6200 AGP card. I have everything put together and it seemed to work fine. I tried the original video card and got 8 short beeps no matter how I reseated the card so it was definitely dead. I could not remove the old ATi drivers first because I needed a video card. After it was all up and running I removed everything ATi.
My problem is now that the screen will go blank for a couple seconds and then come back when I do something graphically. I figured out that setting the refresh to 75 Hz was doing it. I changed it to 60 Hz and it will still do it, but less now. It could not display the original screensaver smoothly so I changed it over to an easier one. If I make the screen flicker quickly a few times it will restart and say it recovered from a fatal error. If I leave it on for a long time doing nothing, the screen will go black and then say no signal, and it will not come back. Restarting it says it recovered from a fatal error.
Some thoughts I have are that the card I have is bad, the ATi drivers are still messing with it, or a program (like styleXP) is screwing it up. What can it be and how can I fix this?
Thanks.