Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Get the Q6600. You can probably get it up to 3 GHz easily.
It's not guaranteed, but most Core 2s are insane overclockers. My Q6600 goes up to 3.2 GHz with no voltage increase.
The bottleneck in my system now is the "slow" Seagte 320gb SATAII hdd with 16mb cache, but I can live with that.
Definitely yes.A good heatsink is a must for overclocking.WHAT ABOUT COOLING? will it need extra?
Yes, you will.Your pc's response time will certainly improve.Apps will load faster etc.will i benefit from a 160GB - WD Raptor 10000RPM, SATA 3.0Gb/s, 16MB Cache
If all your doing is gaming I'd say go dual, but why not wait a month and get a 45nm?
45nm essentially makes the chip smaller, which means it produces less heat and uses less power. Smaller chips essentially make the chip over clock better to.
/Oversimplification.
WHATS THE 45NM ALL ABOUT?
gaming is just one of the things i will be doing i figure multi threaded games are just around the corner, but ill prolly spend more time rendering in 3d design programs like 3D VIZ and MAYA and workin on AUTOCAD
With the stock CPU fan?I just picked up a GO stepping Q6600 from Compusa and put it on a p5b-plus, micron DDR2-533 ram. I set the ram voltage to 1.85 (+ 0.05 ) and the timings to 4-4-4-12, then set the fsb to 300 ( 2.7ghz ), and it runs folding@home at 100% load at 46C. I am quite impressed.
Quad ftw!
i dont think the Q9300 will be worth the 6mb L2 vs. the Q6600s 8mb
looks like everyone is going crazy about 45nm, now my decision has just got alot harder.
in case it helps any, I'm not going crazy... I was already there to begin with.
doesnt seem too impressive at this point, maybe i need to see this in context
looks like everyone is going crazy about 45nm, now my decision has just got alot harder.
45nm isn't as awesome as everyone is thinking. The quadcore 45nm chips already come at 333FSB (1333 for those that drank the marketing koolaid) . Unless you have a motherboard that is capable of a *very* high FSB, you are going to be getting a lousy OC.
Q6600 is 9x 266MHz for 2400MHz.
Bring it to 400, you get 3.6GHz.
Q9300 is 7.5x 333MHz for 2500MHz
Bring it to 400, you get 3.0Ghz.
In order to bring the 45nm chip to 3.6GHz you need 480FSB.
There are some boards that can do that, but not too many.
Q9300/Q6600 because the Q9300 is supposedly going to be introduced at the $266 pricepoint, where the Q6600 is now.
will i benefit from a 160GB - WD Raptor 10000RPM, SATA 3.0Gb/s, 16MB Cache
SOB i never even thought of that...i might just go for a G0 Q6600 now.
Yes they are. Every C2D and C2Q is a 64bit CPU to my knowledge.