Critique my new Build

vage

2[H]4U
Joined
Jan 10, 2005
Messages
3,038
It's about time for me to get a new PC so I am building the following.

Case - Lian Li PC-60BPlusII
Motherboard - Abit IP35 Pro LGA 775 intel P35 ATX
Video Card - EVGA 512-P3-N802-A1 GeForce 8800GT Superclocked 512 mb
PSU - Corsair CMPSU-620HX
CPU - Intel Core 2 Quad Q6600 Kentsfield 2.4 GHz
RAM - G.SKILL 4GB(2x2GB) DDR2 800 (PC2 6400)
HD1 - WD 74GB Raptor
HD2 - WD Caviar 320 GB SATA3
Burner - Doesn't matter
Fan+Heatsink - Zalman CNPS9700
 
It's about time for me to get a new PC so I am building the following.

Case - Lian Li PC-60BPlusII
Motherboard - Asus

Yah, we're gonna need a bit more detail than that... but nice case so far! lol.
 
Actually you won't get everything in on the same day with newegg. They have multiple warehouses throughout the country and they'll ship from whichever warehouse has your parts in stock. I've had a CPU and motherboard come in from the California warehouse, RAM and hard drive from New Jersey, and video card and PSU from the Tennessee warehouse come in on different days despite the fact that I ordered them all at the same time. So basically, you won't always get your parts all on the same day.

Anyway onto the critique:

First, ditch the GameXStream. It has out of spec ripple, or voltage fluctuations, at high loads that can damage your parts over time. While some PCs will never reach those high loads, why pay for a PSU that can potentially damage your PC? There are much better and more efficient PSUs for the price. I recommend any of the following PSUs because they are excellent quality PSUs and offer plenty of power for most systems:
Corsair VX550 550W PSU - $87
Corsair HX520 520W PSU - $104
Corsair HX620 620W PSU - $147

Second, ditch the CNPS9700. There are much better HSF in terms of cooling and noise levels for that price. I recommend any of these HSF:
Tuniq Tower 120 HSF - $45
Thermalright Ultima-90 HSF - $46 & Panaflo FBA09A12M 92mm Fan - $3
Thermalright Ultra-120 Extreme HSF - $57 & Scythe S-Flex SFF21E 120MM Case Fan - $14

Check out this review for a comparison between the HSF I mentioned and the Zalman that you chose:
http://anandtech.com/casecoolingpsus/showdoc.aspx?i=3068&p=6

Third, If you're planning on overclocking, go for a 2 x 2GB set. Some motherboards or some chipsets even, can't OC as well with 4 x 1GB sets even though you're running them at native speeds. And plus having 2x2GB means less points of failure/resistance in an overclock.

Fourth, any reason why you went with that X38 motherboard? The P35 and X38 chipsets perform about the same actually.

EDIT: Apparently your edit wiped out your list. Here it is just in case you forgot:

Case - Lian Li PC-60BPlusII
Motherboard - Asus P5E LGA 775 Intel X38 ATX Intel Motherboard
Video Card - EVGA 512-P3-N802-A1 GeForce 8800GT Superclocked 512 mb
PSU - OCZ GameXStream OCZ700GXSSLI ATX12V 700W
CPU - Intel Core 2 Quad Q6600 Kentsfield 2.4 GHz
RAM - OCZ Platinum 4GB(4x1gb) DDR2 800
HD1 - WD 74GB Raptor
HD2 - WD Caviar 320 GB SATA3
Burner - Doesn't matter
Fan+Heatsink - Zalman CNPS9700
 
I'm assuming Danny saw it all, lol, so I'll just agree with him until you fix the post. ;)

Scratch that, I agree with him completely.
 
I'll definitely look into the power supply, I was a little worried about the OCZ one.

I'll probably keep the Zalman just because I think it looks nicer than those other ones. I won't be overclocking at all, I just wanted something that was slightly better than stock. But I will read that article and decide after that.

Since I won't be overclocking I'll stick with the 4x1GB. I am really only getting that much ram because I run virtual servers and need lots and lots of memory.

No particular reason for the motherboard, after looking around for a while I really liked what this one had for features, I pretty much don't want ANYTHING on it more than I need so I like that it doesn't have a lot of excess ports.

Should I change it really or is there no need?

Thanks for the opinions!!
 
I said this before but it was erased in my edit.

I am getting the Raptor specifically to load only my OS on it so it will be nice and speedy. When it comes time to install programs, games, and applications, and I want to put them no the Caviar, how do I go about doing that? Is it just the same as any install or is there something special I should do?
 
What features do you like about that Asus board?
 
Really I just like how minimal it is. I like how there are only the ports that I absolutely need, I like all the copper heatsinks, and I like how the PCIe slots are set up. Other than that, if you can find me something that is relatively the same and performs the same for cheaper than lets do it!:D








The motherboard I mean, not sex.
 
Putting your installed games and applications on your other HDD is pretty simple, you shouldn't really have any issues. Are you planning to upgrade in the future? The features on the X38 chipset as opposed to the P35 chipset such as PCI-E 2.0 support aren't very relevant for now, since there is no PCI-E 2.0 video cards. The main draw of the X38 chipset, the two 16x PCI-Express lanes is only really useful if you go with ATI cards and CrossFire, since SLI is only available on nvidia motherboards. You can probably shave a little money going with a P35 based motherboard. The ones listed by Danny are all good, if you really like Asus, also consider the P5K-E:

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131196

I'm not sure what the draw of having less ports is if the actual board costs more for features that you don't need. Choosing the Zalman for looks also seems odd, especially given that the case you chose lacks a window, so you won't really see it much to appreciate its looks right? While I understand that overclocking isn't for *everyone*, just getting even a modest overclock on your Q6600 helps a lot, and it is relatively simple as long as you show some caution and read up a bit. Up to like two monthes ago I hadn't considered overclocking either, but read how relatively easy it was that it seems like it'd just be a waste not to.

There doesn't seem to be a real reason to go with that OCZ kit for memory either, since they are mostly 75 per set of 2x1gb sticks right? I might consider this set of 2x2gb g.skill RAM instead:

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231122

G.skill is a good brand, and at 145 for 4 gigs it seems like a good choice. Also, remember that 32 bit OS's (Most versions of XP, Vista 32bit) can only address 4 gigs of memory total, and that includes getting chipped by your video card and other reseources, so really you might only be able to use 3.2-3.3 gigs of that memory. So you may want to consider getting a 64 bit OS such as 64bit Vista Home Premium if you hadn't previously.
 
Putting your installed games and applications on your other HDD is pretty simple, you shouldn't really have any issues. Are you planning to upgrade in the future? The features on the X38 chipset as opposed to the P35 chipset such as PCI-E 2.0 support aren't very relevant for now, since there is no PCI-E 2.0 video cards. The main draw of the X38 chipset, the two 16x PCI-Express lanes is only really useful if you go with ATI cards and CrossFire, since SLI is only available on nvidia motherboards. You can probably shave a little money going with a P35 based motherboard. The ones listed by Danny are all good, if you really like Asus, also consider the P5K-E:

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131196

I'm not sure what the draw of having less ports is if the actual board costs more for features that you don't need. Choosing the Zalman for looks also seems odd, especially given that the case you chose lacks a window, so you won't really see it much to appreciate its looks right? While I understand that overclocking isn't for *everyone*, just getting even a modest overclock on your Q6600 helps a lot, and it is relatively simple as long as you show some caution and read up a bit. Up to like two monthes ago I hadn't considered overclocking either, but read how relatively easy it was that it seems like it'd just be a waste not to.

There doesn't seem to be a real reason to go with that OCZ kit for memory either, since they are mostly 75 per set of 2x1gb sticks right? I might consider this set of 2x2gb g.skill RAM instead:

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231122

G.skill is a good brand, and at 145 for 4 gigs it seems like a good choice. Also, remember that 32 bit OS's (Most versions of XP, Vista 32bit) can only address 4 gigs of memory total, and that includes getting chipped by your video card and other reseources, so really you might only be able to use 3.2-3.3 gigs of that memory. So you may want to consider getting a 64 bit OS such as 64bit Vista Home Premium if you hadn't previously.

Thanks for all the info. I will definitely switch the motherboard, I am not sure what model yet. The case I am getting DOES have a window, and looking at the artcile posted by Danny, the Zalman does just about as well as the others, and I'm really not going to overclock. I don't really care how easy it is, I just have no need to and everytime I try and "mod" my pc, I break something so its just not worth it.

I've heard that getting 2x2GB isn't as good for performance as 4x1GB. I don't remember where or why but I do remember hearing it. Is there no performance difference at all?

I already have a copy of Windows Vista Business 64 bit.
 
I hadn't noticed there was windowed versions of that case, they weren't displayed on lian li's site at least, but maybe they just don't do that in general. Chalk this one up to me being a bit lazy, sorry about that.

In regards to 4x1 or 2x2gb, 2x1gb overclocks better than 2x2gb sticks, especially if they are Micron produced DIMMS (such as Crucial Ballistix), but having 4 sticks of 1gb ram leads to whole other issues, such as no expandability, more possibilities a stick or more of ram is bad, the possibility of motherboard issues such as a bad DIMM slot are exacerbated, etc. Any actual difference in the speed of the two is pretty negligible, and since you aren't interested in overclocking it would seem less hassle going 2x2.

Speaking of overclocking, it is one of the easier things to 'fix' by going back to stock if you mess up, asuming you don't completely butcher it like set the voltage insanely high and fry your cpu or ram. I would just suggest reading about it before completely dismissing it. However, if you are really not interested then don't, it is not the end of the world, and having quad core helps there too.

Btw, I think I might have seen this in your other thread in the Computer & Gadgets form, but what are your intentions with this computer? Gaming? Development/Coding? General Usage? Heavy Encoding?
 
Ok well maybe I will go with 2x2GB then, that way i can always upgrade in the future if I really want to.

In the past I have tried overclocking. I researched the hell out of it, and got into all the ram timings and figured everything out, but in the end, my computer actually felt like it ran SLOWER than it had on stock speeds. In my experience, and its gotta be JUST me, my system runs perfectly fine when I just leave it stock so I'm not going to OC at all.

I'm mostly going to be using this system for running virtual servers and network stuff. I know I don't need such a monster computer for that, but if I'm running 4 virtual servers, I would like the extra horsepower. I don't game too much anymore but since I am getting the system I probably will start a little again. I want something that will be good enough to play Gears of War, CSS, UT3, and Crysis decently. Other than that, I don't really care.

Lots of really good advice here guys, thanks a lot for all your help and keep it coming.
 
Which of these motherboards can I SLI? I am not getting a second 8800GT but christmas is coming and my birthday is right after that!;)
 
To go sli you have to use an Nvidia-based nForce chipset. They run hotter, but since you are set on not overclocking that isn't that big a deal. Here are a few good ones:

EVGA 122-ck-nf68-a1 (Full blown 680i motherboard) http://www.newegg.com/Product/Product.aspx?Item=N82E16813188013&Tpk=evga+122-ck-nf68-a1

EVGA 122-CK-NF67-T1 (680i so has 2 full lanes for x16 PCI Express, but has fewer USB ports compared to the A1, only 1 gigabit lan port, doesn't have the third x8 electrical pci-e slot, uses active cooling via fans instead of heatsinks) http://www.newegg.com/Product/Product.aspx?Item=N82E16813188015

You can also look at asus and gigabyte boards if you want, since you aren't overclocking. The main appeal of the evga boards is they are pretty reliable and they are generally the best overclocking 680i based motherboards. Although since you say you aren't gonna be a heavy gamer I think I may prefer to reliability of an intel-based P35 chipset instead of the SLI based boards, and just upgrade my video card later on instead of adding a second one.
 
Although since you say you aren't gonna be a heavy gamer I think I may prefer to reliability of an intel-based P35 chipset instead of the SLI based boards, and just upgrade my video card later on instead of adding a second one.


Thats a better idea I think. I'm glad you said it I think I was just getting carried away with cool stuff because I haven't gotten one in a while. I'll stick with a P35 board instead of SLI. I'll keep updating the top of this post as I change the stuff, eventually when I get it all together I'll get picture in here too.
 
My experience with the Raptor has left me with the opinion that its not really worth its price premium. My RAID0 array boots windows and loads programs faster... go figure.

Avg Transfer Rate, Access Time: HDD info, Price
78MB/s, 08.2ms: WD Raptor WD1500ADFD 150GB, $160AR
72MB/s, 15.4ms: Seagate Barracuda 7200.10 ST3250410AS 250GB, $65
65MB/s, 13.7ms: Seagate Barracuda 7200.10 ST3320620AS 320GB, $80
65MB/s, 13.2ms: Seagate Barracuda 7200.10 ST3300620AS 300GB, $60
52MB/s, 14.0ms: WD Caviar SE16 WD2500KS 250GB, $70
112MB/s, 13.2ms: RAID0 'cuda's, 600GB total, $120 (ICH9R on P35-DS3R)

As you can see, the 'cuda is twice the size and half the cost, for nearly the same performance. Stick them in RAID0, and you've got an even more cost effective solution. Though, the seek time of the Raptor can't be beat. If you have cash to burn, do so on a Raptor if you really want it. Otherwise, there are better cost effective solutions.
 
Back
Top