Why am I running so hot!?

NewShockerGuy

Gawd
2FA
Joined
Jan 24, 2002
Messages
689
I just built this pc tonight beacuse I never got around to it and had parts laying around for over a year..

Build: Intel p4, 3.4ghz HT
Intel mobo: D915PBL

I am running a SL128 with a 120mm fan that pushes out around 70cfm...

My current processor temp is 47'c IDLE

I am using artic silver 5.

I tried both methods of appling the grease.. size of BB in center and push heatsink on... then when I saw the temp stated above I figured that was bad, so I then took it off and put a THIN coat over the entire heatsize of the processor...


Any advice?

I don't know why it's running to hot.. this seems WAY too high... my p4, 2.8ghz is only running at 34'c at idle...

This is one of the reason's why I bought the SL128 because it's supposed to be awesome...

I am positive that all 4 contact points are making contact on the motherboard but it was a pain in the ass, you clip one corner and then the other corner would lift up..etc I thought I was going to break the mother board trying to get all 4 fasterns to click..

It's in a Lian Li pc65b plus.
So it has a 120mm intake, 80 blow hole, and 80mm exhaust along with a side blower...

My old p4 is also in a lian li pc 65, But that has two front 80mm intakes, two 80mm exhaustand a 92mm blowhole that I made...

Thanks,
-Nigel
 
I have no clue as when I saw this I didn't do anything else....

I don't understand when reading reviews their idle temps are 34'c

-Nigel
 
I have a P4 3.6 in my current machine.

I have insane amounts of air cooling and I get between 45c and 47c during idle and under load.

There's a reason this version of the P4 is nicknamed the Presshot.

FYI... The max recommended temperature on these is around 64c.
 
I re-did everything.

Moved a couple wires, and actually, lapped the heatsink/processor.

I now get idle temps of 34-36'c.

Much happier :)

-Nigel
 
Back
Top