New C2/8800 Build

BTK17

Weaksauce
Joined
May 20, 2007
Messages
102
Time has come for a new build.

Including shipping my budget is $925

----------

Mobo
GIGABYTE GA-P35-DS3R LGA 775 Intel P35 ATX Intel Motherboard - Retail
$129.99

CPU
Intel Core 2 Duo E6550 Conroe 2.33GHz 4M shared L2 Cache LGA 775 Processor - Retail
$175.99

RAM
Crucial Ballistix 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Retail
$110.99

GPU
EVGA 320-P2-N815-AR GeForce 8800GTS 320MB 320-bit GDDR3 PCI Express x16 HDCP Ready SLI Supported Video Card - Retail
$294.99 *$15 Mail-In Rebate*

HSF
Scythe SCINF-1000 120mm CPU Cooler - Retail
$37.99

Thermal Paste
Arctic Silver 5 Thermal Compound - OEM
$5.99

CD/DVD
LITE-ON Black 16X DVD-ROM 52X CD-R 32X CD-RW 52X CD-ROM 1.5MB Cache SATA Combo Drive - OEM
$24.99

HD *I Own It*
Western Digital Caviar SE16 WD2500KS 250GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive - OEM

PSU *I Own It*
CORSAIR CMPSU-520HX ATX12V v2.2 and EPS12V 2.91 520W Power Supply 100 - 240 V UL, CUL, CE, CB, FCC Class B, TUV, CCC, C-tick - Retail

Case *I Own It*
APEVIA X-CRUISER-BK Black Steel ATX Mid Tower Computer Case - Retail

OS
Microsoft Windows Vista 32-Bit Home Premium for System Builders Single Pack DVD - OEM
$111.99

---------------------

= $892.92 + UPS Guaranteed 3 Day Service Shipping *$15.84 *

Total Price *Shpping Included - Mail-In Rebate(s) NOT Included* = $908.76

Even though the E6550 has a 1333 FSB the P35 chipset will have no problem getting it to 3 GHz as the mobo overclocks like a beast. I am looking for 3.2 GHz stable. The Scythe Infinity HSF is normally $57.99 and a great HSF and should be perfectly fine for good overclocking. And I need some AS5.

MicronD9GMH RAM.

I have the Hard Drive and I would just reformat it. The PSU is definitely good. The case is HEAVILY modded and now I have it to where I can't see any wires and looks super clean. It has good airflow and I could definately fit 2X 8800GTX's.

My monitor max res is 1280x1024 so 320MB should be fine.

------------

Thoughts/Opinions? Any changes to make? Crysis here I come?

Thanks!

-BTK
 
Why get an E6550 when an E6750 can be had for only $25 more? The E6750 has proven to have the same OC headroom as the E6850. If you buy good RAM (PC-6400 with Micron D9 chips) you can increase your OC aspirations to the 3.6-4ghz range w/o issue.

Mark.
 
The low multiplier on the E6550 also makes it very difficult to OC. Another vote for the E6750.

What resolution monitor are you running? You may be better off with a 640MB 8800 GTS.
 
um the Ballastix is microd9GMH

and the g.skill HZ is MIcrodD9 not the NQ..........

with the p35 chipset 3.2 ghz will be easy........

i have a strict budget

ill get the ninja
 
um the Ballastix is microd9GMH

and the g.skill HZ is MIcrodD9 not the NQ..........

with the p35 chipset 3.2 ghz will be easy........

i have a strict budget

ill get the ninja

Danny's point with the NQ sticks is to save money, since they're $80 instead of $110. You don't need the HZ sticks to hit 3.2Ghz using the E6750.

$190 - E6750 from mwave
$130 - DS3R from newegg
$80 - 2GBNQ from newegg
========
$400 + tax and shipping

This combo is easier to OC. This combo can hit 3.2Ghz for sure, and possibly 3.4-3.6Ghz, depending on how good the NQ sticks can OC. Typically, they can reach 425-450Mhz.

With your current plans...
$176 - E6550 from newegg
$110 - Ballistix from newegg
$130 - DS3R from newegg
========
$416 + tax and shipping - $40MIR

This combo can hit 2.8Ghz for sure, and most likely 3.2Ghz. 3.5ghz is a stretch, but still possible, since the RAM can typically reach 533Mhz.


If you want to save $25 and go for the E6750 AND the Ballsitix, just drop the board down to the IP35-E ($90 @ mwave - $20MIR) or GA-P35-DS3L ($90 @ mwave) instead.

$190 - E6750 at mwave
$110 - Ballistix from newegg
$90 - IP35-E or DS3L at mwave
=========
$390 + tax and shipping ( - $20MIR if you go with the IP35-E)
 
And to further clear things up for you:

With the E6750's 8 x multiplier:
8 x 333 = 2.66Ghz <= DDR2 667 RAM, Stock Speeds
8 x 400 = 3.2Ghz <= DDR2 800 RAM, Good OC

With the E6550's 7 x mulitplier:
7 x 333 = 2.33Ghz <= DDR2 667 RAM, Stock Speeds
7 x 400 = 2.8Ghz <= DDR2 800 RAM, Good OC
7 x 460 = 3.2Ghz <= DDR2 RAM with Micron D9 chips

So like enginurd had clarified, it's cheaper and easier to just OC the E6750 than the E6550.
 
The E6550 typically tops out around 3.5Ghz, while the E6750 typically tops out around 3.8Ghz.
 
64bit. Drivers are finally mature for just about everything but Creative products, and it allows you to address more RAM, etc. No reason to go 32 bit anymore, really.
 
well i just got 32 bit i dont need server stuff

but i found a cd/dvd drive

and got the e6750

so everything the same except i got e6750

same mobo,ram,hsf,gpu but not cd drive
 
...32 bit can only address ~3 GB of RAM. It has nothing to do with 'server stuff' and can actually be faster in day to day stuff, too. Firefox starts noticeably faster under Vista 64bit than it does under 32bit on my system, for example. I'd cancel the order for 32bit if I could, were I you.
 
...32 bit can only address ~3 GB of RAM. It has nothing to do with 'server stuff' and can actually be faster in day to day stuff, too. Firefox starts noticeably faster under Vista 64bit than it does under 32bit on my system, for example. I'd cancel the order for 32bit if I could, were I you.

i think the max i will use is 2 gb ram anyway
and i dont care about a 2 second faster FF start

it will be fast enough with a c2d @ 3 ghz +
and it's not a big deal to me that i got 32 bit not big enough to cancel my order

and i have gotten mixed opinions from people about 1/2 saying 64 and 1/2 saying 32

so i just stayed with what i know and am comfortable with which is 32 bit

what i am feeling better about is i got the E6750
 
he's 1 person...........

I asked about 40 people and got mixed opinions and from what I have seen sites give mixed opinions

so i just went with 32 bit

i owned xp 32 bit..........

seems ppl pro are faster programs and finally drivers are good

ppl who arent are saying about no x64 programs not a lot of them and drivers suck

so i just chose 32 bit

and i take take people's advice and go e6750
 
I didnt say you don't take advice, I said "so much for asking for people's advice on the OS." One person? so you ignored my post. :( Still, thats only 2 people. You gotta give more time for people to reply, lol.

Really though, 64-bit Vista has come a long way. So, if you can, switch it. The driver issues are mainly if you have old peripherals. BTW, Vista takes a while to learn your tendencies, so it'll be a bit slow at first.
 
well it dont think its a big matter

but i think i should be happy with the rig
 
Back
Top