NEW Q6600 UCore loading error, and shut down

sockhead

Weaksauce
Joined
Jan 12, 2005
Messages
103
Hi guys, my completely new computer is having some trouble. Upon booting, my computer tells me that it has had a Ucore loading error, but i am still able to progress and go into the bios

once in the bios, i have an almost arbitrary amount of time, before the computer just suddenly shuts off by itself

if i try starting up again right away, it shuts down almost immediately

i was thinking this might be a temperature issue, but from what i can see im running everything right and my stock hs is seated properly...

any ideas?
 
I forgot, here's my specs:

Q6600
P5k-deluxe
620W Corsair
P182
4gb OCZ GOLD DDR2
evga 8800gts 320mb superclocked

i don't think it's an issue with my cpu being seated properly, cause i recall seeing my mobo detecting it as a intel core 2 quad q6600... another thing is that on the box of my p5k it says "quad core ready"

...
 
check asus support site to make sure the version of BIOS your board is running is quad core compliant.
 
I forgot, here's my specs:

Q6600
P5k-deluxe
620W Corsair
P182
4gb OCZ GOLD DDR2
evga 8800gts 320mb superclocked

i don't think it's an issue with my cpu being seated properly, cause i recall seeing my mobo detecting it as a intel core 2 quad q6600... another thing is that on the box of my p5k it says "quad core ready"

...


Do you have a g0 stepping quad ? (SLACR) by chance... Other then this 'error code' you get on boot... Does it boot up and run ok otherwise ? What bios are you using currently ?
When you boot up the comp,it'll tell you on the boot screen(0123 or 0202 or 302 or 0404)
 
Yeah, I am running the SLACR stepping. I am able to bypass this error code by pressing F1, and get into the BIOS. But after a few seconds in the BIOS (ranging from seconds to maybe a minute), the system shuts down. From a cold boot, this process is maybe a minute. If I try booting right after, it might not even boot...

But I've read reports that if the issue is with the CPU stepping, that you wouldn't be able to boot at all... I'm able to boot, just not stay stable for long...
 
My bios version is 0404.

I was thinking that the shut downs could be a problem with the way my power is routed? Right now, my case fans are definitely not routed properly - directly to the power supply (not through the mobo), and they're connected through a single molex connector.

I was thinking about doing that BIOS upgrade to the new V5 version, but from what I hear, people who are having that same Ucode error are not having the shutdown issues I'm having. My stock CPU fan is connected how it's supposed to be connected from what I can tell, and the fan goes on when I turn on the machine, so I'm not sure it's a heat issue. Besides, it wouldn't shut down by itself within like a 50 seconds of starting up if its a heat issue right?

A funny thing just happened. All my clock settings are set to auto right now, and I just booted up (right after a cold boot that had shut down), and the clock speed was listed at 12.59GHz.

Anyone know where on the P5k bios I can go to see the current CPU/mobo temperatures? I know I've seen a restriction section where I think they put the limits for temperature for the proc/mobo (something like 85oC, and 35oC?).
 
Anyone know where on the P5k bios I can go to see the current CPU/mobo temperatures? I know I've seen a restriction section where I think they put the limits for temperature for the proc/mobo (something like 85oC, and 35oC?).

It's under the "Power" tab, and the section you want is the "hardware monitor".
 
Ah yes, I was on this page. This is the one where it said 85oC and 35oC under each of the CPU and mobo temperatures. I thought there were limits? Here, I'm able to select one, and choose ignore... Is that a bad idea?
 
Correct, you need to make sure the pushpins are fully seated. you have to push like hell, so hard it will hurt your thumb. Best to do it with the board out of the case as it flexes the board a lot.
 
hey guys! thanks for all the help. turns out that one of the pins on my heatsink was twisted, so that when i pushed it in, though i thought it was actually in... it wasn't! now i am idling at 37-38oC in the bios, unoverclocked...

i might as well get this question out of the way right away... for a p182, do you guys connect your case fans to the motherboard, or to the ps directly? the fans have those lmh controller settings that I figure would only be useful if i wasn't connecting it to the mobo, but what do you guys do?
 
Back
Top