Need Help With Building My First Pc =]

Joined
Jul 12, 2007
Messages
54
So I'm building a new computer because my old one is falling apart (I've tried everything, mainly duct tape haha, it was damaged in a hurricane). The only things I really do is play games, surf the web, homework, and convert dvds.

So far I have:

2GB 800mhz DDR2 Ram
500Gb SATA HD
either GeForce 7600GT or Radeon x1300 pro graphics card (PCI-e)
A few DVD drives
a floppy drive
old sound card

but now I need help choosing a processor and mobo (and then a case and power supply accordingly)

Given what I'll be using it for (and games, i only play the old cs, um the one around condition zero), what sort of mobos and processors should I be looking into. I definitely want duel core, but I don't want anything to pricey. I don't mind if its Intel or AMD.

But basically I'm clueless and whatever you recommend I'll blindly follow =]

Thanks!
 
Motherboard = Gigabyte GA-P35-DS3R LGA775 $130

Power supply = CORSAIR 520 Watt = $115 after rebate.

Processor. The E6600 should still work fine for you. Of course for about 50 bucks more, you could get the Quad processer, q6600.

Intel Core 2 Duo E6600
E6750 would probably also be fine for you, but that costs a little more as well.

*claps* Although, I'd probably change the motherboard to an Abit IP-35//IP-35 Pro. I've heard good stuff with that motherboard.

i'd also go E6750, then upgrade to penryn Q1 next year :)

wait, i just doubled back. This is your first PC and you already have those parts?
 
Well its my first pc that I'm building, I've bought comps from dell before. I have most of those parts, from trying to fix my old pc, but it's turned out that so much stuff needs fixing that I'm basically building a new computer lol. So the only thing I don't have off that list is the ram. The graphics card I bought (because I thought the problem was the graphics card) was a radeon x1300pro agp but agp is almost obsolete now so I'm sending it back for either a GeForce 7600GT or the same thing in PCI-e (can't decide yet =S).

Thanks for the replys, I'm going to go take a look =D
 
Wooh, so I looked, but the processor looks a little pricey for me, I know, thats sad, but I'm poor :p.

So would the E4400 still be good?

or could I get something from AMD like the 4000+(cheep I know) or the 5200+

also, as I am a rather clueless person, why are the AMD 64 x2 cheaper then the intels? Are they worse quality or what?

Also I think I might try and OC, I've never done this either, hardly know what it is, but why not :D
 
Alsoooo what is the minimum cache I should have? its x2 512 mb good or should I go for 2x1mb?

also wait can the intel e4400 support 800mhz ram?
 
Guys. hes only playing cs 1.6 (and cz), surfing the web, and doing some oher light gaming and burning.

My pentium 3 800mhz and 9200pci played cs source at about 30-40fps, so i imagine any new computer will play source at the recommended 100+fps, along with a decent card such as a 7600gt.

Once i get back ill spec out a system for you, also what is your price range (sorry if i missed it)

Ok well here's your best bet:
http://www.newegg.com/Product/Product.aspx?Item=N82E16819115014 (E4400)- It will give you GOOD overclocking ability if you want it, even on stock cooling you should hit 2.5 or more ghz. It runs decently cool, is cheap, and will play any game out there just fine. It is one of the best budget cpu's you can buy.


http://www.newegg.com/Product/Product.aspx?Item=N82E16813138075 (Biostar Mobo)- It will give you decent oc'ing, doesnt have a ton of "frills", but it will do what you want it to do. It should be fairly stable, decent overclocker, support your memory, has 6 USB ports, and won't break the bank. DS3R would be better, but your on a budget, but splurging for the DS3R MIGHT be a better idea.

O yes the case and psu.

For the psu, i imagine you won't be running a ton of things, so this psu would be good.

http://www.newegg.com/Product/Product.aspx?Item=N82E16817189005 (Xclio PSU), it has 500 watts of power (which will be plenty more than what you need) will power anything upto an 8800gts (an 8800gtx might work, but id go with something beafier) and is definatly a good performer for the money. The corsair would be a better choice, but its almost twice the money and you don't really need all the power. (I have used a similar xclio psu until it got hit in a lightning storm, worked great and protected the rest of my components from damage)

As for case, its really upto you. Almost all cases are standerd atx cases that will do what you want, so just pick one thats in your budget/looks and what you like. Posting the case here before you buy also wouldn't be a bad idea (in this thread)

you'll be good to go.

Hope I could help.

Thanks.
 
Ok Thanks that looks about right =D! I'll post what i have so far tomorrow, and see if its all good and maybe look at that other motherboard!

Thanks a ton!:D
 
We could be of better help if you told us what was your budget for the CPU, mobo, case and a power supply altogether.
 
I'll just give you a list of the bare minimum I'd use:

$119 - E4400
$90 - 650i Ultra ($20MIR)
$75 - 2GB DDR2-667
$50 - XClio Goodpower 500W
$35 - Centurion 534
=======
$370 + tax and shipping - $20MIR

If thats over budget, you could drop down to a Pentium E2140 or E2160 (they just have half the cache of the E4000 series; they OC great, too). The E4400 or E2160 can reach 2.8Ghz safely on the stock intel cooler. For anything higher, you'll need a better CPU HSF.

E4400: 10 * 200 = 2.0Ghz, DDR2-400 << STOCK
E4400: 9 * 333 = 3.0Ghz, DDR2-667 << Nice OC

Oh, and go with the 7600GT for the vidcard.
 
So so far I have

x2 DDR2 1Gb 800Mhz (http://www.newegg.com/Product/Product.aspx?Item=N82E16820227139)

x1 Barracuda 7200.10 320gb PATA (already own, it's PATA not SATA like I thought it was)

x2 DVD rw drives

x1 Floppy Drive

x1 Intel E4400 (http://www.newegg.com/Product/Product.aspx?Item=N82E16819115014)

x1 Old sound card (or use on-board one)

x1 GeForce 7600Gt Graphics card PCI-e (http://www.newegg.com/Product/Product.aspx?Item=N82E16814130062)

x1 Old CRT monitor

x1 old keyboard and mouse and usb external hub


Now for the Mobo, people have suggested-

Biostar Mobo-
(http://www.newegg.com/Product/Produc...82E16813138075)

The DS3R, but there are several and not quite sure which one

NVIDIA nForce 650i Ultra ATX Intel Motherboard- (http://www.newegg.com/Product/Product.aspx?Item=N82E16813188017)


Should all of those work with what I have so far? Before I said the HD was a SATA instad of a PATA, so would this change anything?

Now for the PSU, I was looking at combo deals on cases and PSUs, for like 50 bucks. Is it most likely that these are crap, and I should buy them separately? If this is the case I'll most likely go with the one mentioned above (http://www.newegg.com/Product/Product.aspx?Item=N82E16817189005)

Now for the case, I have three cases lying around the house, and I was wondering if any of them would work (but since I'm OCing I'm not sure if the ventilation is good enough). I have an old black cases that were big around 2003, another Dell case like that one but the lying down version, and an old grey Gateway case from around 1998.

Thanks for all your help =D
 
everything looks good, id get the ds3r if you can afford it

Now for ocing most cases will be fine, just make sure your cpu doesn't go above about 70 degress C
 
... Should all of those work with what I have so far? Before I said the HD was a SATA instad of a PATA, so would this change anything?
...
I have an old black cases that were big around 2003...

Are your DVD drives PATA as well? I'm guessing they are. In which case, if you go with an Intel based chipset board, you'll need a PCI IDE controller for them. If you go with an nForce 650i Ultra board, it will have 2 IDE controllers, one for your HDDs, and one for your optical drives. A PCI IDE controller is around $10.

So, you could go with the Biostar P35 or the Gigabyte P35, and one of those PCI IDE controllers. Or, you could go with the 650i Ultra board from eVGA instead. The choice is yours.

Do you know the brand/make/model of the case? If not, can you take some pix of it? What size fans does it have and how many of each (and location)? What are the case's dimensions (LxWxH)? The other cases from dell and gateway are most likely trash, so don't bother with them. The Centurion case I recommended above is very affordable and is a great budget case, so thats another option.

The DS3R everyone is recommending is the GA-P35-DS3R.
 
The case looks something like this-http://www.lawrencekendall.com/lk_site/images/dell_pc.jpg

and the other one is one of these lying down. They only have a 12cm fan on the back, so I'll get a new case as well. I wanted to get the Antec 900, but it's a little pricey for me :( .

Which one of these three looks alright?
http://www.newegg.com/Product/Product.aspx?Item=N82E16811208009
http://www.newegg.com/Product/Product.aspx?Item=N82E16811290003
http://www.newegg.com/Product/Product.aspx?Item=N82E16811119106

So what are the differences between the mobos? Is it just that some are more stable?

So it seems like if I want a good board get the Biostar- http://www.newegg.com/Product/Product.aspx?Item=N82E16813138075

If I want a better board get the DS3R- http://www.newegg.com/Product/Product.aspx?Item=N82E16813128050

but for those two boards add on 2x PCI IDE for $24 + shipping

or get the

NForce 650i Ultra- http://www.newegg.com/Product/Product.aspx?Item=N82E16813141004

and one PCI IDE for $12 +shipping?

The NForce 650i Ultra is the cheapest so, I'll get that, unless it's worth paying the extra for one of the other boards

So now I have

NForce 650i Ultra- http://www.newegg.com/Product/Product.aspx?Item=N82E16813141004------- $80

x2 DDR2 1Gb 800Mhz- (http://www.newegg.com/Product/Produc...82E16820227139)-- $72

x1 Intel E4400 (http://www.newegg.com/Product/Produc...82E16819115014)------- $126

x1 Barracuda 7200.10 320gb PATA ----------------------------------------------------------------own

x1 PCI IDE (http://www.newegg.com/Product/Product.aspx?Item=N82E16816132005)--$12

x2 DVD rw drives PATA-----------------------------------------------------------------------------------own

x1 Floppy Drive PATA-------------------------------------------------------------------------------------own

x1 Old sound card (or use on-board one)-----------------------------------------------------------own

x1 GeForce 7600Gt Graphics card PCI-e (http://www.newegg.com/Product/Produc...82E16814130062)------------------------------ $75

x1 Old CRT monitor-----------------------------------------------------------------------------------------own

x1 old keyboard and mouse and usb external hub-----------------------------------------------own

x1 Xclio PSU (http://www.newegg.com/Product/Product.aspx?Item=N82E16817189005)------------$50

x1 case-----------------------------------------------------------------------------------------------------------$30-$50

So that comes to about $455 + s&h +tax

Does that all look like it would work and the best I could get.
 
$35 - Centurion 534


The last one is good, and the first two aren't that great. Its nearly the same model I listed earlier. Go for the one from SVC.com, since there's no rebate to deal with.

So what are the differences between the mobos? Is it just that some are more stable?
Usually its the featureset. Stability is usually based on the chipset, along with some other things that are manufacturer dependent, like which capacitors they use, how well they manage power being delivered to the CPU, etc. Though, yes, the DS3R is better than the TForce.

The 650i Ultra is a good, cheaper alternative to the P35 boards.

but for those two boards add on 2x PCI IDE for $24 + shipping

One PCI IDE Controller card has 2 IDE controllers, for a total of 4 PATA devices per PCI card.
 
Ok, I'm going to stick with the 650i then.

As for the case, I checked out the case you suggested enginurd, but they were killing me on shipping. Do you have any recommendations from the newegg cases? I'm going to order everything tomorrow :D .

Thanks for all your help !!! =D
 
That RAM will work. And there's a $35 rebate for it.

As for cases, I think Newegg is gonna kill you even MORE on shipping out the cases you chose, possibly most cases from Newegg. So your cheapest and best bet is with the Centurion case from SVC.com for $35.

But if you insist on buying from newegg, go for the the last case you listed in your earlier post, the Centurion one. But see if you can buy a computer case locally from a Fry's, Best Buy, CompUSA, Circuit City, etc. Maybe slightly more expensive but it's cheaper than buying a case online where you have to deal with shipping.

As for coupons, you have to be part of newegg's mailing list. Thats the only way I know of to get those coupons.
 
Ok, well what it was was that the case had $30 shipping, and newegg has $15 shipping.

Ok so I looked at the ram and it says it needs 2.2v while the other one needs 2.0v, but as long as it still works with that board thats fine. But I think that means it won't OC as well?

Thanks =]
 
Ok, well what it was was that the case had $30 shipping, and newegg has $15 shipping.

Ok so I looked at the ram and it says it needs 2.2v while the other one needs 2.0v, but as long as it still works with that board thats fine. But I think that means it won't OC as well?

Thanks =]

Damn. Still comes out cheaper though. $65 for the Cent from SVC.com with shipping versus $75 for the Centurion with shipping from newegg.com

Not too sure about the RAM question though. I'll let someone more knowledgeable take a crack at that. Better than a half-assed answer from me.
 
Yea but I don't nessacerally want that particular case, really any case will do as long as it's cheap and works.
 
If you don't mind rebates, that OCZ ram is fine. My friend has a pair, and they work great for his E6600 build. Don't worry, with DDR2-800 and a CPU multiplier of 10x, you won't need to OC the ram at all.

Actually, you should get a case with good airflow, which the Centurions have while still being quite cheap. So svc.com charges more for shipping? I guess you live pretty far from CA, hehe, cuz they usually only charge me $12 for shipping that case. Anyhow, go for the Centurion from Newegg then.
 
=O ok cool, that's what I was looking at, the Centurion Cool Masters. Haha yea, I live in Louisiana =P, but that's not too far away really is it?

Ok I wasn't really planing on OCing the RAM, well not much anyway, was just worried about the change in Voltage from 2.0 to 2.2 :)
 
Ok I wasn't really planing on OCing the RAM, well not much anyway, was just worried about the change in Voltage from 2.0 to 2.2 :)

It'll be fine. The DS3R can handle 2.2vDIMM easily. Actually, it can even go higher, hehe.
 
Back
Top