New PC = Necessary

MistakenID

Weaksauce
Joined
Jul 18, 2007
Messages
124
Well the gaming forum told me I should come over here for some help with a build.

Looking too get a decent PC for around $1,000 - $1,500. Preferebly something that can handle Crysis low-medium.

I've checked out Alienware (27.24% APR:eek:) AVADirect (Seems good a little pricy thou) and CyberPower (I've been told not too buy from em)

Too inspire a little pity I'm still running an old Socket A AMD Baton at 1.8GHZ along with 1GB SDRAM, Nvidia 6800 on a old K7Mobo ....so as you can see I need a new PC.

I've got a basic handle on most hardware terms and a little more knowledge than your average household PC user but I'm a noob when it comes too assembly and advanced stuff. (BIOS, overclocking, extreme technical stuff etc.)

Thanks for helping a newbie out [H]!
 
I would say the best idea is to build one.
Price out the parts on NewEgg.com if you live in the states, NCIX.com if you live in Canada.
Do a little bit of research on each part, try to aim for deals, then maybe post your build here.
$1500 is enough to have a computer that will run Crysis probably on high settings no problem.
 
Do they have any kind of building tool over there? I have an idea about what I want but when it comes too compatability I'm kinda lost in the woods. I would hate to order a bunch of sweet parts only to have them explode when put together.
 
Nope. If you post a list of parts here (with links back to the Newegg page), we could point out obvious issues like sticking an AGP video card in a PCI-E motherboard, and provide feedback on possible alternatives. More useful than your average build tool. Which would you rather trust with your computer, some company's sales department or a bunch of nosy nerds that have no financial interest in your choices?
 
Exactly what will you be doing with the computer, I can price you out some nice parts once I know exactly what you'll be using it for.
 
Exactly what will you be doing with the computer, I can price you out some nice parts once I know exactly what you'll be using it for.

MistakenID said:
Looking too get a decent PC for around $1,000 - $1,500. Preferebly something that can handle Crysis low-medium.

Looks like to me he wants to game and play Crysis :p
 
945P = no. For the level you want, get a P35 and accept no substitutes.

Get a better power supply too. I like Seasonic. Enhance is good for a bit less money. 400W will do you fine.

CPU: Intel price cuts, E6600 being replaced, blah blah blah

Video: 8500GT is a piece of crap. Especially if you're going to be gaming. If you want a DX card, the BARE MINIMUM is an 8600GTS, and even that is an overpriced piece of crap. Wait for Geforce 9 series.

That memory is nice but WAY too expensive for what you get. Find a deal like the Crucial Ballistix for $60 (not sure if that's still going on) or go for Super Talent. Yes, Super Talent is good stuff. Seriously.

I'd go for a Samsung T166 series drive over that. 500GB preferrably. It'll be faster and quieter and IMO more reliable (my sample size is too small to prove that reliability statement, so don't take it as fact)

No comment on the DVD-RW or monitor.


Also, post prices next time you list stuff. We don't want to have to click each link just to be able to tell you whether what we recommend is cheaper or just a bit more but worth it.
 
Ok well that right there needs quite a few changes.

Case: fine

Mobo: If you're not planning on SLi at some point: GIGABYTE GA-P35-DS3R
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128050
If you are planning on possibly SLi perhaps someone else has a good recommendation, I'm not a mobo master.

Power Supply: Corsair 520W PSU
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139001
PSU is very important, and I wouldn't trust that Rosewill.

Proc: Wait until July 22nd and get an E6750. Should be around $200 and will be a much better proc.

Video Card: you won't be playing Crysis with an 8500. 8800GTS 320mb at least, although if you can spend the money on it go with the 640mb version. I'd say go with an EVGA card just because of the 90day step-up program.

Memory: Save some money and go with this Corsair set
http://www.newegg.com/Product/Product.aspx?Item=N82E16820145590

HDD: Seem fine to me.

DVD: Fine

Monitor: Never heard of that brand, see if you can find some reviews.
 
Well I've made some modifications and will post the links later.

Two questions thou.

What is replacing the E6600 and when are the 9 series cards coming out? Also any idea on the pricing for the 9 series?
 
Assuming that the next round of Nvidia cards is indeed labeled the 9 series, you can expect that probably around november.
 
I recommend a Zalman 600 Watt PSU. I bought it earlier this year and it rocks. I think I paid $130 for it. But if you find a 500+ watt PSU for cheaper, go for it.
 
The Q6600 (quad) drops to $266 or thereabout next week. Don't buy before Monday the 23rd. For a psu I would reccommend either the Corsair HX520 or the HX620. They are made by Seasonic and top quality. The 520w will cover you fine but you may want to consider the 620w for future upgrades. You wont need more than that for your set up.
 
2 more questions [H] and I will leave you be.

1. Vista32 or Vista64?

2. Are there any good guides for PC assembly? It's been ages since I've messed with anything beyond primary drive selection and video card install.
 
Note that his method of putting on Arctic Silver 5 isn't exactly correct, a better method is to use a rice-size drop in the middle of the CPU and let the heatsink squish it out over the CPU with pressure.

No. With a CPU with an ISF, do 5 separate small dabs of it, one in the center, one near each of the 4 corners. It doesn't matter that the die under the heatspreader isn't as large as the heatspreader; the larger the contact area, the better. Rice sized is way too big in any case. If you were doing a chip without a heatspreader and with a die that is pretty small, like say an Athlon XP or something, even half a grain of rice may be too much. That size is probably right for a C2D but you can't expect it to spread that well on its own.
 
Seems to be alot of controversy over AS5 application. I think thats the main thing is to cover most, if not all, of the surface. Of course how to accomplish that seems to be the bigger controversy. Some do the grain of rice method. Some spread it out with finger covered in plastic(so it doesn't stick to finger). Some spread it out with a razor or credit card. Personally, I used the grain of rice method last time and it worked fine. I never heard of anyone putting 5 small dabs but I guess if it covers the surface it would work.
 
Thanks a ton for all the help [H]!

I have more questions still.

Vista 32 or 64?

Also what would be a good Heatsink/Fan for the Q6600?

I was looking at some socket LGA 775 fans but none of them said anything about Q6600 support. Since this is my first experience with quad core I want too make sure it runs smooth and doesn't explode.
 
If you aren't using 4gb of RAM then I would reccomend 32bit Vista.

For a heatsink, go for the Thermalright Extreme 120.
 
Guide: http://www.mechbgon.com/build/index.html

I dont see an optical drive listed in your final build. One of the other posts listed an IDE drive. If you're buying a new one, go with a SATA optical drive.

The Corsair 520W is cheaper from Zipzoomfly.com or Buy.com.

Pickup some Arctic Silver 5 for $5, and use the arctic silver website's instructions on how to apply it.

I'd suggest the E6750 for the CPU. There really is no need for a quadcore right now, and with a P35 board, you could upgrde to a Yorkfield (45nm quadcore) within a year. They'll run much cooler, lower voltage, and will most likely OC like crazy.
 
For the optical drive I was planning on saving $ and using the drives from my old CPU below which still work fine.

More newb questions. What is the benifit of having a couple SATA drives with RAID configured?

My basic understanding is that RAID retrieves data from the hard drive faster...

Thanks for the guides guys! Those have been a big help and I've read over em a couple times.

"Assembly Guide"
Usefull for low level [H] users
+ 3 knowledge
+ 5 confidence
:D
 
More newb questions. What is the benifit of having a couple SATA drives with RAID configured?

My basic understanding is that RAID retrieves data from the hard drive faster...

Well yes, RAID 0 will improve speeds but it can be a pain and if you do use it, KEEP REGULAR BACKUPS.
 
RAID is designed for situations where it costs you a lot of money if the server goes down, or where you have many many users hammering a server simultaneously. RAID 0 has been pimped recently by marketeers because it helps them sell extra hard drives and, before it became available on virtually every motherboard as a result of the fad, was used to help justify large cost deltas between fundamentally similar motherboards. In the desktop, it's mostly good for increasing the probability of losing your data. If you really need a faster hard drive, buy a Raptor or something...but this is hardly the first place in a system to spend extra money.
 
RAID is designed for situations where it costs you a lot of money if the server goes down, or where you have many many users hammering a server simultaneously. RAID 0 has been pimped recently by marketeers because it helps them sell extra hard drives and, before it became available on virtually every motherboard as a result of the fad, was used to help justify large cost deltas between fundamentally similar motherboards. In the desktop, it's mostly good for increasing the probability of losing your data. If you really need a faster hard drive, buy a Raptor or something...but this is hardly the first place in a system to spend extra money.

Agreed.
 
In that case RAID will stay away from any computers I own.

Well I think that is all [H]..........for now. :p

I'll be sure to post pics when I start the build.

Thanks for helping out a nOObie [H] and not just saying "lolz noob go learn teh computars."
 
YW, have fun!

For the optical drive I was planning on saving $ and using the drives from my old CPU below which still work fine.

And for future reference, a CPU is a central processing unit, which is part of a computer. CPUs do not have optical drives. :p
 
Back
Top