Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Another block soon coming on to the American scene is the Aqua Computer Cuplex XT DI in a G 1/4 thread. This block is specifically designed for duo's and Quads. This link is for a G 1/8 thread.
Top Nurse [H]ardness Supreme
Another block soon coming on to the American scene is the Aqua Computer Cuplex XT DI in a G 1/4 thread. This block is specifically designed for duo's and Quads. This link is for a G 1/8 thread.
The GT's primary difference with the Apogee™ is an optimized internal structure. The improvement in thermal performance scales from a minimum of 1°C and up to 3°C (at 100W) depending on the CPU's, with Intel's latest QX6700 quad core processors benefiting the most from the revised structure
The all-new D-Tek FuZion™ CPU block will shatter enthusiasts' expectations about water block design, appearance, and high quality manufacturing. Unique to the FuZion™ is the 4 to 1 flow chamber design that provides outstanding flowrates while the unique baseplate design delivers thermal control more efficiently than any restriction or impingement based blocks currently on the market. The FuZion™ design is optimized for the current high wattage multiple core processors now on the market today.
Holy crapola, take a look at the pump first TN. A restrictive nightmare of a block on a CSP-Mag when you could get the free flowing Fuzion or Apogee...its a no brainer.
As was said earlier, with that pump, and quad cores, you really have two best choices. The Fuzion or the Apogee GT.
^^^^
Indeed.
I think it's a close enough call with these 2 to leave it to aesthetics.
Any thoughts or concerns over nozzle arrangement between these 2. Which is the more "free flowing"?
Can anybody confirm that Fuzion is less restrictive.
I might end up with Fuzion by default.
Swiftech site says it might be 2 weeks before the block ships and a lot of people are out of stock and the online stores that have them are wanting 79.95 .......................bastards. j/k I guess thats why they still have them.
Thanks for that info migueld. They should send you a referral fee.
I guess we can put this thread out of it's misery. Just ordered the Apogee GTX from Jab-Tech.
I'm sure I'll be posting the OC results and temps once everything gets here.
Thanks to all for the help!!
Quoted from Aqua PC's site:
"The effective flowrate is nearly doubled by this concept, the area covered by the pin structure is significantly increased while the flow resistance is not noteworthy increased. The cuplex XT di is the perfect match to current dual and quad core processors but can also be used for all other processor types."
"As the predecessor cuplex XT, the cuplex XT di is a high end and high performance watercooler manufactured with nozzle-cooling technology. The bottom is made out of highly pure copper and has an optimized pin structure for a better heat transfer which is significantly wider spread than before. Accelerated via the first sets of nozzles integrated into the middle section made of matt chromed brass, the water is led onto the first area of pins of the copper bottom. The water then is redirected to the second set of nozzles and again accelerated towards the second area of pins of the copper bottom before being led to the outlet of the cooler.
"This cooler has an outstanding cooling capacity used on multi core processors as well as on traditional single core CPUs which beats the cooling capacity of all other CPU waterblocks in our product range. The cooler is planned for use with pumps of the type aquastream and 1046, more powerful pumps aren't needed and only effect a slight advancement of the cooling capacity."
Hehehehe.......I slapped an Apogee GTX (very cool looking I must say) at the end of my Nautilus 500.
Besides looking very nice, the temps at idle and at load are about 2-5 degrees lower right now than with the stock cooler that came with the set.
I got mine from Performance.![]()
I've got the Apogee GT on my Nautilus. It works a little better than the stock block, but the difference isn't earth shattering. The stock block actually isn't that bad, it's just got crappy mounting hardware.
I've read blurbs and seen references to this "bowing". Can someone explain more about this?
I've read blurbs and seen references to this "bowing". Can someone explain more about this?
Swiftech includes an 3mm o-ring (instead of the stock 2.3mm) with the Apogee GT. When you put it in place, there is definitely a slight curve to the copper plate. I haven't gotten it mounted yet (I'm waiting for the Q6600 price drop), but I imagine the pressure of having a cpu under it will cause it to conform to the surface.I guess what I mean is that there is something about using an oversized O-Ring but I've read that it is hard to make that thing fit but I don't see how you can actually effect the shape of a solid copper water block with an O-Ring. I thought it had something to do with bowing something internally or the top or........................
I ain't buying a water block that can only be used on one manufacturer's set of CPU's.
That is something to think about. Hmmmm what are we talking with the bowing? 1-3C
To TN, there is optional mounting hardware for other processors.
That is something to think about. Hmmmm what are we talking with the bowing? 1-3C
To TN, there is optional mounting hardware for other processors.
Just because you *can* bow the block doesn't mean you have to. I don't know of any block that is processor specific (mounting hardware aside).
To TN, there is optional mounting hardware for other processors.
5C on average from bowing. It's quite a large gain. See testing results done by Nihksub1 of the leading cpu waterblocks on the market today: http://www.xtremesystems.org/forums/showthread.php?t=151781
It includes bowed and nonbowed results.