E6600 Temperature

E

ellover009

[H]ard|Gawd
Joined
Jul 17, 2005
Messages
1,911
I have an Asus P5N32-E SLI mobo and I just updated the bios to the latest, finally decided to install that Asus probe program, My computer is currently running at 57C according to Asus probe, so I would think that this is a little on the hot side, Is this something to worry about? My two things that came to mind is possibly replace the Thermal compound or get a better cooling method than the stock fan. But I don't think it should be that hot for being run as a stock E6600 with no O/C. What do you guys think? In the Asus probe it's telling me the case temp is 43c. I am thinking maybe when the processor was installed some of the compound might have not spread the right way since Core2Duo fans are a pain in the rear to get them to go in the right way. I actually went to a friends house hes a pc tech, but he lives 40miles away from me. What do you guys think. Reason I even looked at this is because I been playing LOTRO and lately the game has crashed, get the blue screen of death and the whole thing resets. I am trying to narrow down the problem.
 
57C is very warm for idle. You should be getting around that temp for load. Since your crashing I doubt a temp sensor is off. I would start by re-applying paste and if that doesnt work, make sure your IHS isnt concave.
 
What is ideal temp for idle? I have also heard some things of using Artic as a thermal paste, what do you think?
 
I decided to use sandra to see some specs, and I notice it gives me different readings on temp. It's telling me processor is at 44C and Board temp 58C, I am thinking maybe the Asus one might be off, or it's taking in consideration both temps, What would be the best software to get accurate temp reading? I wanna make sure before I pop the thermal compound off, the fan is a pita to get in.
 
Ideal temperature is as low as possible.

It all depends on your cooling and ambient temperatures ( temps in your room ).

..and yeah I'd take a look at the installation, that seems much too high unless your room is massively warm ( like 40°C warm ). The stock things do take forever to get it right, took me three tries to get mine on the first time. I always get all three on and then one doesn't want to go, I move it around and then get it in and ANOTHER one is stuck. -_-
 
Asus Probe is rubbish and infamous for false readings. It used to tell me my cpu was 240 degrees. Take it off the machine and use something else.
 
I went to the bios and it gave me a reading of of 62c CPU and 43C mobo on Sandra 44C CPU temp and 60C board temp so which one is right? I really wanna find out before I order artic silver 5 thermal compound and reapply it to the heatsink/fan.
 
ellover009 said:
I went to the bios and it gave me a reading of of 62c CPU and 43C mobo on Sandra 44C CPU temp and 60C board temp so which one is right? I really wanna find out before I order artic silver 5 thermal compound and reapply it to the heatsink/fan.
Click to expand...

Try reflashing your BIOS, maybe? I have no idea -- it the chip is actually idling that hot you have a serious problem on your hands.
 
I played around with a few flash versions. Even a beta one, not too much difference.
 
like silent-circuit said, install coretemp or speedfan to monitor your temp, and try to add some fans (intake & exhaust) its better if you can put 120's fan. you can also buy AS5 n local radioshack stores.
 
OK guys, gonna order artic cool 5 and the thermal paster removal. This is not fun. time to play with the pin pushing action.
 
You must log in or register to reply here.
Back
Top