new build not posting

Rambo

Limp Gawd
Joined
Apr 3, 2007
Messages
390
I just finished putting together my new build (new build in sig). It's not posting! The only thing I don't have in yet for my new build is the PSU. I'm using the standard 4-pin cpu power. Does the P5K Deluxe have to have the 8-pin to work? I have all HDDs and drives unplugged. I tried resetting the BIOS just to see if that was the problem. Please help!
 
What DOES it do? Beep? Nothing? Is the PSU fan running? Any lights?
 
it does nothing. psu fan and all other fans spin including cpu hsf. no beeps.green light on mobo comes on.
 
if green light on mobo comes on and all the fans are spinning, then is it possible that the machine posts but you simply don't have a picture from your videocard? Which videocard and does it have enough power from your old PSU? Do you have a different videocard you could try? Did you plug the videocards power connector in?
 
its an 8800gts that i used in my Home PC build in my sig. It was working fine there with the same psu. Do you know if this mobo has to have the new 8-pin style cpu power connector?
 
try swapping out the ram from another computer and putting it in the new build, if it still doesnt post.. im going with the MoBo being DOA


edit: wait a sec...

you only ahve a 4 pin plugged in and there is an 8 pin connector on the mobo? that is the problem if you do.


you have to have all 8 connected
 
well I'll wait til i get the new psu in and see what happens i guess. i hope its not a doa mobo cuz i changed the stock thermal paste to arctic silver 5
 
That is totally irrelevant to the mobo.

Yes it is, I changed the stock thermal paste on the northbridge and southbridge chips on the mobo.


Well, I tried it out with the new psu with the 8-pin cpu power and still nothing. I'm gonna go run to work real quick and borrow some memory out of a computer there and I guess try out another video card and see what happens...
 
Well, I swapped out the ram and it did everything it was supposed to. Thanks for all the help guys. Guess I gotta go spend some more money now...:(
 
Well you can always RMA that RAM. Corsair has a very good RMA department I believe.
 
The ram is dead or the voltage wasn't enough for it? Did you try upping the voltage to 2.2v or whatever the spec is for that ram, while the working ram was in the system?
 
It's Crucial RAM. The RAM is prolly fine, just not in that mobo.

Didn't think about changing the voltages and timings....good thought;) . I'll try that tomorrow.
 
yeah try changing the timings and stuff, for my ballistix my ASUS M2N-SLI didnt pickup on the correct clocks (started it in 5-5-5-12), so you might be having a similar thing
 
Well I got it to work for those who care. Thanks alot for all the help...especially the post that said to up my voltage with the working ram in it cuz that's what I had to do. :)
 
...now you go buy the cheapest single stick of 1.8 volt DDR2 you can find, so when your CMOS gets reset you won't sit there kicking your own ass for hours on end...
 
Back
Top