Q6600 wattage requirements..

GEN3RIC

Limp Gawd
Joined
Feb 22, 2007
Messages
174
I know this may have been discussed but i spent an hour googling the universe and nothing has come up that satisfies my question....

I'd like to order a Q6600 to take over the role of a MicroATX Celeron D with 2GB of memory. It is just too slow to do the multitasking that we do here at work. I have my finger on the mouse trigger ready to order my parts for $800 but... one little dilemna..

It's a Rimage DLN5200 (http://www.rimage.com/products_detail_objectname_pr_DLN5200.html) that has only so much room. It has a built-in PSU and converter. The PSU is only claiming a 180W MAX.. I dont know if I would be able to find another PSU that could fit in there and handle more wattage without doing some jerryrigging.

Will a 180W PSU (dont know any details about this unit..sorry) satisfy my system comprised of an Intel DG965OT motherboard (onboard video/sound), the Q6600, 2x1GB of Corsair DDR2-1066, and 2x36GB SATA drives?

I sincerely hope so or this is all in vain... I am relying on [H]'s creativity here!
 
Honestly, I don't think the motherboard in that machine will accept a Q6600 and even if you managed to run it, the powersupply isn't enough. A Q6600 has a 105W TDP so this would leave only 75W for everything else, which is frankly insufficient.

 
Honestly, I don't think the motherboard in that machine will accept a Q6600 and even if you managed to run it, the powersupply isn't enough. A Q6600 has a 105W TDP so this would leave only 75W for everything else, which is frankly insufficient.



The G0 stepping Q6600s are 95W TDP.. could get lucky there?

And the motherboard specifically claims to support Quad-Core...

http://www.newegg.com/Product/Product.aspx?Item=N82E16813121086


Do you have any creative ideas for powerful and SMALL PSUs?
 
180watts will not be enough

I would suggest a minimum of 500watts
When overclocked, the Q6600 uses 150watts
 
There will be no overclocking, but thanks for that figure.

I would be interested in utilizing the $220 E6600 instead.. its a 65W CPU.. no overclock..just stability. Would that work? I am hoping for a yes.
 
What is the deal with the g0 stepping? I mean is it available yet, and how can you verify that when you order?


Well upon looking into it, the g0 stepping isnt available until the July 22nd price drop and at that you probably won't get one due to the percentage of them actually out there..

I hate proc revisions because you get a mixed bag. Its like an entirely different cpu with this stepping and a guarantee would be nice...
 
So it is actually luck of the draw if you get one or do they list the stepping when you order? I can wait a week or 2 if that would improve my odds.


Well upon looking into it, the g0 stepping isnt available until the July 22nd price drop and at that you probably won't get one due to the percentage of them actually out there..

I hate proc revisions because you get a mixed bag. Its like an entirely different cpu with this stepping and a guarantee would be nice...
 
I could see if I could replace it with this.. 400w. Highest I could find.

http://www.newegg.com/Product/Product.aspx?Item=N82E16817338008

Spend a few bucks more on a better brand like this, which I've done rigorous testing on: http://www.newegg.com/Product/Product.aspx?Item=N82E16817104952 (averaged .66 PF at load). I made a mistake on my review and forgot to mention the readings were from the actual pull from the wall, not how much was actually being delivered to the system (still 470w x .7 = 330 watts continuous load test).

even better, if you can capture one of the $35 rebates on this (doubt it's still going on anymore), I've recently tested this one and found it to be much more efficient. Worth it if you can get it for the $15 after rebate like I did:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817371004 (at 385 watts pull from the wall it averaged a .98 PF rating.
 
Spend a few bucks more on a better brand like this, which I've done rigorous testing on: http://www.newegg.com/Product/Product.aspx?Item=N82E16817104952 (averaged .66 PF at load). I made a mistake on my review and forgot to mention the readings were from the actual pull from the wall, not how much was actually being delivered to the system (still 470w x .7 = 330 watts continuous load test).

even better, if you can capture one of the $35 rebates on this (doubt it's still going on anymore), I've recently tested this one and found it to be much more efficient. Worth it if you can get it for the $15 after rebate like I did:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817371004 (at 385 watts pull from the wall it averaged a .98 PF rating.

You can bet I would pay out the nose to make this deal work.. I just could not find anything better. (3 options)

Is that one small enough to fit into the case? It looks like MicroATX .. but I honestly have not been able to figure it out just yet. The unit can't be taken offline for just any old reason so I have to schedule something just to take it apart and get to the real #s. Thanks for the suggestion....
 
Yea id def say 500 watts, leaves room for some expansion....also you dont want to ever be running on maximum wattage.

I remember my first computer my bros built for me had a 350 watt power supply....well lets just say for a few years i was wondering why it would randomly crash.
 
You can bet I would pay out the nose to make this deal work.. I just could not find anything better. (3 options)

Is that one small enough to fit into the case? It looks like MicroATX .. but I honestly have not been able to figure it out just yet. The unit can't be taken offline for just any old reason so I have to schedule something just to take it apart and get to the real #s. Thanks for the suggestion....

I can only say that I've got both of those psu's I suggested and they must both be standard atx form factor. I've never researched M-Atx psu's so I don't know if there are different mounting holes for that type.
 
Some retailers will guarantee revisions.

I think FrozenCPU, or ExcaliburPC used to do that.
 
180W PSU's have no place in quadcore system. Even if your system pulls less than 180W it will still be close, and stressing the PSU and just begging for it to fry your $1000+ of equipment.

Just my $.02 - get a beefier power supply, change cases, or whatever it takes to get more power in there.
 
There'll be no overclocking.. in fact I would consider underclocking because the CPU's best usage would be for multitasking in this business environment.

I think I can get a higher wattage PSU in there but I am going to need to get luck. The biggest I could find was 400W .. can we just assume that the E6600, motherboard, 2GB Corsair, 2xSATA drives, 2xDVD readers will have enough power on 400W?

I mean. its got NO video card and that usually consumes the majority of the wattage.
 
I think I can get a higher wattage PSU in there but I am going to need to get luck. The biggest I could find was 400W .. can we just assume that the E6600, motherboard, 2GB Corsair, 2xSATA drives, 2xDVD readers will have enough power on 400W?

Plenty, I run the system in my sig with 420W and have for almost a year, just make sure most of the power is on the +12V rail(s).

If not OCing the cpu is only going to run 65-70W at full utilization. Its not like the old P4 power eaters. And I agree about the video. You should be fine, more than enough.
 
Back
Top