So, I'm experimenting with various fan placements. As you all know, the case ships with 2x120mm intake fans, placed in lower part of the front of the case but it's easily changeable.
By default, fans are blowing on the psu, lower portion of the mobo and videocard. Well, I wanted more air in the cpu area, so I moved one hdd cage (empty) 2 notches up, and now it's blowing over memory modules, cpu and NB a little bit. I moved the lower cage one notch up. Here's how it looks, schematically:

My third intake fan is on the side door. Now, the front fans are very slow (1000rpm or so), side door is around 1100-1200 (Antec tricool at low). My 2 exhausts are at low (120mm) and med (200mm).
Now, my question is whether this is a good setup. Taking off the side door drops load temps by about 4-5c. I would appreciate if other owners of 900 would chime in with their setups for intakes on 900.
By default, fans are blowing on the psu, lower portion of the mobo and videocard. Well, I wanted more air in the cpu area, so I moved one hdd cage (empty) 2 notches up, and now it's blowing over memory modules, cpu and NB a little bit. I moved the lower cage one notch up. Here's how it looks, schematically:

My third intake fan is on the side door. Now, the front fans are very slow (1000rpm or so), side door is around 1100-1200 (Antec tricool at low). My 2 exhausts are at low (120mm) and med (200mm).
Now, my question is whether this is a good setup. Taking off the side door drops load temps by about 4-5c. I would appreciate if other owners of 900 would chime in with their setups for intakes on 900.