e6400 c2d fun! New to OCing.

DJS2

Limp Gawd
Joined
Aug 25, 2005
Messages
344
Hey all, I have a few questions and would like opinions as well.

I was just messing around with BIOS settings and looking at OC/Temps.

Right now at 3.0Ghz
vcpu: 1.35
vdimm: 2.0

2.8Ghz:
http://i2.photobucket.com/albums/y5/DJS3/2.jpg

3.0Ghz:
http://i2.photobucket.com/albums/y5/DJS3/3.jpg

Memory (CPU at 3.0):
http://i2.photobucket.com/albums/y5/DJS3/3-1.jpg

How does everything look? if anything stands out at you that I need to change something please let me know. I can give more info as well.

When I run orthos and cpu is at 100%, is this considered load? Im asking this because when I use TAT's 100% load I get a good 5c higher than when I use orthos. Which one should I trust?

At 3.0Ghz Im getting 43/46 idle and 48/52 load using Orthos. I dont want my temps to go over 55 really. Im pretty baffled that I dont have Idle temps of 30c with my WC setup, i dont know if its my WB or what... Ive done the AS5 perfectly and reseated the DD TDX WB quite a few times. Flow seems to be good as well.

Anyways, what do you guys think? Good/Bad for my first OC? Anything I should change or strive for?

Thanks!
 
TAT will always give you higher temps than ANY game out there, and also higher than ORTHOS or folding@home. Suffice to say, if your temps are OK with TAT, you are good to go.

Decent overclock but I bet it can do more, read BillParrish' thread about overclocking these rigs....got to run to work!

edit: initially, I was only able to do 2.8 stable on my E6400, but after reading a bit on the C2D it was easy to get 3.2ghz. I bet you could too!
 
TAT will always give you higher temps than ANY game out there, and also higher than ORTHOS or folding@home. Suffice to say, if your temps are OK with TAT, you are good to go.

Decent overclock but I bet it can do more, read BillParrish' thread about overclocking these rigs....got to run to work!

edit: initially, I was only able to do 2.8 stable on my E6400, but after reading a bit on the C2D it was easy to get 3.2ghz. I bet you could too!

If anyone is listening, can I get a link to BillParrish's thread? I searched but no luck.
disclaimer: I might be blind :cool:
 
Back
Top