Qx6700 Water Cooling

Kibosh

Weaksauce
Joined
Dec 25, 2006
Messages
104
Well, first off I'm new at DIY yourself pc's. If you'll see my sig I have myself a great system. After some tweaking in the bios with off course the great help on this forum, I have it running very stable now. Took me a lot off hours understanding what I was doing with the settings etc.

So now I come to the next part for my rig. The cooling. That cpu in there runs hot. At stock I'm safe but only just. I'm using coretemp because TAT doesn't work for some reason. At full load with Prime running small FFT's on 4 cores, the temp go's just above 80°C after seconds.

I'm changing already the stock fans of the coolermaster with the brand papst + I will add one extra. These are ordered already, and are mainly to get things more quite. That extra is of course for better air-flow.

Now someone pointed out to me that there might be an issue with the placement of the Zalman. I'm trying to find a place where I can find that Masscool Shin-Etsu X23 Thermal Interface Material in Belgium or the Netherlands. Untill now no luck. But this will be the first thing I will attempt to get the cpu cooler. It's the cheapest.

But untill then, I have some time, and this time I want to spend about learning Water Cooling and what I can expect from it.

I was thinking about that Freezone, but following that thread there are also people with very negative results, but no answers why they have negative results. But then again, there are some with very good results also. Extremely good results even.

So now all advice is welkom. There are some things that are important for me.
1. All has to fit inside the case, so no radiators hanging outside.
2. Things have to be quite.
3. The thing has to cool off course, and cool very good!

So is this possible?
 
I did already some searching and came with danger den. Now I'm still looking for good reviews about the thing.

I was thinking off the Danger Den MAZE4 Power Kit . The thing is, at stock my cpu is rated 130W. I want to oc it to 3.2GHz and run it smooth and quitly. But I don't know how much heat this will be: 150W? Maybe there is something better; If just found a good review off it. Well, back to google.
 
I did some fishing around. This is what I came up with:
It's all from Danger Den:

Black Ice Pro Radiator = 25
Copper TDX Block for Intel 775 Processors = 53
12V DD-D5 Pump = 75

Still needed, a good reservoir that can be installed like for example a dvd.
Some tubing and other small parts. I'm guessing at the end I will have to dig up some 180 US dollar for this gismo.


But I really don't know what to expect from this. What temperatures will I be seeing? Will this make a big or small difference?

Also I don't like those thick 1/2 tubes. I prefer a smaller size, but does that exists and what will be the effect?
 
You need more than a black ice pro. If you cannot go with a 2x or 3x 120mm radiator, you probably shouldn't bother. The QX6700 puts out a LOT of heat when overclocked.

Swiftech MCR 220qp or 320qp will do you very well, as will the thermochill pa series (at one hell of a price premium)

And for the love of god, edit your first post, don't respond to yourself.
 
I keep hearing that CoolIT soon will release another cooler similar to their Freezone and Eliminator for the Quad. May want to wait for that?
 
You need more than a black ice pro. If you cannot go with a 2x or 3x 120mm radiator, you probably shouldn't bother. The QX6700 puts out a LOT of heat when overclocked.

Swiftech MCR 220qp or 320qp will do you very well, as will the thermochill pa series (at one hell of a price premium)

And for the love of god, edit your first post, don't respond to yourself.

:D I will do that next time :D

Well then. Then I shouldn't bother. 3 fans ain't making this a more quite system. And will not fit inside the case. Hmmm. Well then, up to the next solution. If there is one. Or wait untill Coolit get their stuff working for all. And not just some.

Is their a way for calculating what I need? The quad has 130W TDP. So I can know what to expect when I buy a new one? If I ever figure out what it will be.
 
you get a gold star for that tripple post, havnt seen one of those in a while.

anywho... i have that block, its nice, its beefy, and its big. almost too big. i had to grind a 1/8" x 1/4" section off of one end because it wouldnt clear the power caps around the socket. other then that its a nice solid piece of copper which will take the heat from that chip nicely.
 
you get a gold star for that tripple post, havnt seen one of those in a while.
:D I know, wasn't realy thinking. :D

But anyway. I'm forgetting the water cooling for now. I don't want to use those big radiators. I will wait for Coolit to bring out the quad cooler, and in the meanwhile try some other cooling paste and maybe also another cooler unit.
 
Back
Top