Hospital gloves good for a new build?

HakBilal

Limp Gawd
Joined
Nov 24, 2006
Messages
309
[H]ey guys,

I was wondering to prevent static electricity from damaging the system should I use doctors gloves, the rubber kind, not latex.

Also, if I switch out a graphics card in my old system to put into the new system, do I have to do anything special once it is gone to make sure it works in the new one? I figure once I uninstall it I need to uninstall the drivers on the old computer, but will the old drivers on my card carry over to the new computer? I mean will the card itself carry drivers along?
 
If you are really worried about static charges during your build .....

Playdo.attach.ground.strap.gif
 
if you have carpet, walk bearfoot and touch the metal casing or mount tabs on the cards or the screw holes(at the corners) or IO ports on the mobo first to ground/equalize any static and help prevent damage, preferably in that order, and try not to move much.

also wearing polyester/nylon or other stuff besides cotten can increase your static buildup while moving, specially if your a hairy mofo and have a low humidity level in your house/apartment/dorm or in the city/region you live in
 
Good ole electric cuff huh? I only asked about the gloves because I have several around here, I dont really have one of those cuffs. Can they be homemade?
 
yup, its just a conductive wire in a fabric sleave for comfort, a ghetto version is a simple wire tied around your wrist and clipped/tied to the case/ground
 
So no one has tried the gloves, I'm down for tying a wire around my wrist, but my original question still stands. I would assume that it would work, but then again, you know what happens when we assume.
 
So, I take it you are assuming the rubber gloves will act as an insulator thus reducing the chance of a static charge jumping from
you to the case. Better to equalize the two instead so you don't have to worry about it. Do the strap/wire.
 
The proper name is an anti-static wrist strap. I would rather use nothing and stand on a wood floor than use rubber gloves, but I wouldn't do that either. Wrist strap FTW ;)
 
I use rubber gloves, latex i believe, when taking my laptop apart and it still works! I hope this is of some help, because everybody else seems to use wrist straps.

Is it okay to ground yourself by attaching a wrist strap to a radiator?

 
I use rubber gloves, latex i believe, when taking my laptop apart and it still works! I hope this is of some help, because everybody else seems to use wrist straps.

Is it okay to ground yourself by attaching a wrist strap to a radiator?

Latex gloves. How does this differ from what party balloons are made of? As we all know, those can be a huge source of static electricity.
 
Back when I was a noob, I once disassembled my 'puter on top of my bed in my carpetted bedroom. The comp still worked. What gives? Has any tech site ever conducted an experiment to determine if static discharge is really capable of harming components? That is something I would really like to see.
 
Back when I was a noob, I once disassembled my 'puter on top of my bed in my carpetted bedroom. The comp still worked. What gives? Has any tech site ever conducted an experiment to determine if static discharge is really capable of harming components? That is something I would really like to see.
You should find this page useful :: http://www.webopedia.com/DidYouKnow/Computer_Science/2002/static.asp
Microchip damage can occur if it is exposed to static electricity as low as 10 volts, and humans are not able to perceive static electricity until it has reached about 1,500 volts. (Walking across a rug can produce a static electricity voltage of up to 12,000 volts, but static voltage is not life threatening.) So it is possible to damage a hard drive with static electricity that is not even felt by the person because it is at such a low voltage. Also, computers become increasingly susceptible to static electricity damage as more and more circuitry is built into them.

There have been countless threads on this subject in the overclocking forums over the years. If memory serves, a wrist strap is generally seen as a precautionary measure. Good to have but not 100% necessary. Be smart. Don't shuffle your feet on the carpet & pet your cat before working on the computer.

What I do is touch the mounting screw on a wall socket periodically, or the static discharge plate on my UPS. No problems yet.
 
cool guys, thanks for the answers. I am assuming the second part of the question is ok as well, this is a big first build for me. I have swapped out parts for parts before, but not built an entire computer, should be loads of fun! Gonna take off the socks and constantly touch metal to keep myself grounded. I appreciate the rubber glove love, hell... no glove, no love. (hah)
 
My method is to work barefoot in the kitchen. That keeps me grounded. Humidity is a big factor. Low humidity is a better environment to create static. Fortunately I live in south Louisiana where the average humidity is 103%.

Your rubber gloves will not keep the static charge from building up on you. It will (at best) only insulate your hands from your work. If you are carrying a charge and bump something with your forearm or elbow, thats an electrical path.

Radiator, street sign, wall plate screw, whatever. if you use a wrist strap you have to ground yourself to something that is grounded. Something that eventually, actually goes into the actual ground. Earth. Earth ground.
 
yup, its just a conductive wire in a fabric sleave for comfort, a ghetto version is a simple wire tied around your wrist and clipped/tied to the case/ground

NO NO NO

Static-safe wrist straps have a high-ohm resistor in them, something crazy high, to prevent injury from static or even normal voltage. Using just wire is begging to have a trip to the ER.

Spend like 0.2 cents on a wrist strap lol!
 
Back when I was a noob, I once disassembled my 'puter on top of my bed in my carpetted bedroom. The comp still worked. What gives? Has any tech site ever conducted an experiment to determine if static discharge is really capable of harming components? That is something I would really like to see.

I guess those anti-static drier sheets do work :p
 
ok. Imma go downstairs and just open up the chop shop. Put it on a table and make sure I start grounded, I guess every 15 minutes or so I can touch something grounded, but I got the idea. Thanks for the replies guys.
 
call me dangerous, but i never use a wrist strap when building a rig. i've neve had a static problem. i have grounded my self, but i don't do it religously or anything.
 
Back when I was a noob, I once disassembled my 'puter on top of my bed in my carpetted bedroom. The comp still worked. What gives? Has any tech site ever conducted an experiment to determine if static discharge is really capable of harming components? That is something I would really like to see.

Sticky
 
Get an update fellers.

ESD is still a concern and should not be disregarded but its nothing like the old days when most of the horror stories come from. Manuf quickly implemented new designs to make parts fairly static immune, the big pile of dead chips out back was a good incentive.

Just use common sense, dont go scrubbing your feet across a carpet etc etc.

Have everything at hand before you start so you dont (as someone already mentioned) have to walk across the living room carpet to go get some part.

Install the power supply FIRST, here is why,

With the power supply screwed into the computer case and TURNED OFF at the switch on the rear and plugged into the wall, if you house has been built since ohh say 1960 the outlet is grounded, see the 3 pins ? you are good, and plugging in the power cord just grounded the powersupply and thru the mounting screws the entire case. OK good,

Now hug your case, its a nice case, it loves you, or at least give it a good pat on the head , anyway just touch your case anywhere it is metal, front panels are usually plastic btw, and you will dissipate any charge you are carrying. As you work just occasionally make sure to touch the metal part of the case. Before you reach for the mb, touch the case, before you reach for the cpu/heatsink/, touch the case, before you grab the memory sticks, touch the case. go pee and come back, guess what ? touch the case.

Wirst strap never killed anyone, that I know of, and actuclly I think rubber gloves are an extreamly BAD idea, you will store up any charges generated and if any other part of your body or clothing touches some part of the computer it will all discharge at once. Its just fundamently completely opposite of all ESD protection procedures which are all desiged to a) prevent static in the first place b) discharge it constantly so no buildup can occur.


Funnyest thing ever, made all employees on shop floor wear ESD straps on their shoes to discharge any static buildup, could get fired if caught on floor without one, pissed us off cause we had to put one on every time we when out to look at a problem. However since we were a classy outfit even the bare concrete shop floors where waxed to a gleam every week by custodial staff. think think what is wrong ...

Wax is a very good insulator and prevented the foot straps from working. !!!! We delighted in informing the plant manager of the fallicy in his stragety. I guess thats why our water fountain never got fixed .

Took about 3 months but instead of having non-shiney floors, they spent a fortune in using special electrically conductive floor wax !
 
Just to chime in with my experience here, my Fiance completely fried my dream HTPC with static through a USB cable. It was this winter and out place was particularly dry. We have berber carpet and she was messing around and grabbed the USB cable for the Logitech Harmony remote and ZAP!! Blank screen on the Plasma and the system shut down.

I thought "no worries, cycle the power supply and all will be well". Wrong, would hang on boot with a memory error. Tried a CMOS crearing as per DFI's instructions several times. No luck. Came down to a dead pair of Mushkin Redline 4000 2x1G and my beloved DFI Ultra-D.

Ever since then I have take fair heed of the static warnings. No problem before, or after. But a nice $500 kick in the pills.
 
Well guys, time for an update. I just hooked everything up, on a big wooden table with house shoes on carpet. I kept touching the power supply to make sure I was grounded, and guess what. It works, because I am posting here right now! The below setup is finally working. Now I just have to install service pack 2 and all those goodies. I have a vista disc coming soon, should I even bother or stick with XP pro?
 
lol see my sig, unless you have some need for Vista I would avoid the headaches for now, learned from experience. Works for a lot of people but there are a lot of upset people too, and the video card drivers and most definately not ready for prime time.

XP with some upgrade deal (read the fine print VERY carefully) would be my choice.

edit; oops sorry GRATZ on the build !
 
Just to chime in with my experience here, my Fiance completely fried my dream HTPC with static through a USB cable. It was this winter and out place was particularly dry. We have berber carpet and she was messing around and grabbed the USB cable for the Logitech Harmony remote and ZAP!! Blank screen on the Plasma and the system shut down.

I thought "no worries, cycle the power supply and all will be well". Wrong, would hang on boot with a memory error. Tried a CMOS crearing as per DFI's instructions several times. No luck. Came down to a dead pair of Mushkin Redline 4000 2x1G and my beloved DFI Ultra-D.

Ever since then I have take fair heed of the static warnings. No problem before, or after. But a nice $500 kick in the pills.

OUCH, guess thats a good reason to give you case a hug even if you are just walking up to it do some Hard forum searching before you touch anything else.
 
if you house has been built since ohh say 1960 the outlet is grounded, see the 3 pins ? you are good,

This assumes the builder was actually competent and no changes have been made since. Example - old houses used copper plumbing and the ground was connected to the plumbing. Along comes Joe Reno and he replaces the plumbing with plastic and doesn't notice where the ground was connected. New houses now require separate ground rod independent of plumbing to avoid such problems.

Go to Radio Shack or Home Depot and get a simple outlet circuit tester (~$5). It will tell you if you have proper ground, hot and neutral connections on the wall socket. If it doesn't, get it fixed.
 
Also, if I switch out a graphics card in my old system to put into the new system, do I have to do anything special once it is gone to make sure it works in the new one? I figure once I uninstall it I need to uninstall the drivers on the old computer, but will the old drivers on my card carry over to the new computer? I mean will the card itself carry drivers along?

No, the drivers shouldnt carry over on the card. just make sure the card is the same slot and it will work.
 
Back
Top