ABIT IC7 Max3 Question.

Bluntablo

Weaksauce
Joined
Aug 4, 2004
Messages
113
Hey guys, I have already DL the user manual and such from Abit's website, Im just looking for some input on my Problem...

The Coolant Fan on the Center of the boars seen here

http://www.abit-usa.com/products/mb/products.php?categories=1&model=130 (click on the image)

Sometimes when I turn the PC on, this fan spins Slowly and makes much more noise than it should...I know this is not right, but if I boot up, let the PC warm up a little, the power down and turn it back on, the problem is usually remedied...Its only done this twice so far, but I would like too kill the problem befoer it gets worse.

My question is, Is the fan going out, or should I look into other Issues first before flat out replacing the fan?

Second, If I have too replace the fan, what kind of fan is it?..I have looked through the manual and Am unable too find any info about the Type of fan this is.

Im capable of replacing the piece, I just dont know alot about the Bios and such too check for other problems.

Peace
 
If it's making a lot of noise, it is likely going out. If it's spinning slowly, it's possible that the fan speed regulation in the BIOS has been turned on.

You might want to replace the fan. Hurry up and do it before ABit goes out of business, if you want an original ABit part. Some people replace it with a passive heatsink, since the board is notorious for having that fan fail.
 
There have been many reported failures of that chipset fan on this motherboard. That is about the only bad thing about the IC7 MAX3. Otherwise, its a fantastic motherboard. During bootup, your chipset fan and the OTES fan (the one on top covered in the blue shroud) should be spinning at full speed, then slow down once in the Windows environment. If your fan is making MORE noise when it is rotating slower, I would say its on its way out.

You can buy an exact replacement, or replace it with something a little better. Since you're most likely out of warranty by now anyway, I'd probably get a third party chipset fan to replace it with.

MCX159-CU.gif


Link
 
Yea, the fan is dying.
I cant remember the exact size.... but if you are replacing there are better options than just replacing the fan.
This is a good option if you want to get rid of the fan completley
http://www.newegg.com/Product/Product.asp?Item=N82E16835118214
and its cheap.
If you dont mind a fan then maybe this
http://www.crazypc.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=51040U&Category_Code=
works real good, but more $

Or, some people just disconnect the fan entirely, but I personally wouldn't do that.

I have modded a fan into place on one of my older/first IC7-Max3 northbridge, but was more trouble than it was worth so the other 2 options I mentioned would probably be better.

Hope this helps
D.
 
Thanks for the Info guys...Is the more expensive fan really worth the 30 extra dollars? I mean, How much hotter would it run with a $5 heatsink over a $35 fan?

Depending On which I choose, I would just pop the old fan off and replace it, or do I need to get somekind of tool to remove it? Is the original Glued down?

Just curious before I go and start messing with parts :)

Peace
 
It's not glued, but over the years you might find that the heat has made the thermal contact material very pasty. You'll need to unhook the wires in the loops that are on the motherboard; that frees the assembly. That done, you can twist and lift to break the seal.

Clean whatever goo is left on the sink with some isopropyl alcohol. Then, apply a new layer of heatsink material before you install the new sink.

How cool do you need it to be? If you're overclocking, then you probably want the Swiftech unit. If not, then you can run the Swiftech unit without the fan or find a passive heatsink that can be mounted to that motherboard.

I don't think the Zalman unit that Debaucher linked to works on the IC7 MAX3, since it uses loops instead of holes. The description at NewEgg seems to agree with me: "Caution: ZM-NB47J can not be used on motherboard that lack mounting holes around the NorthBridge chipset"
 
Thanks again for Awesome Info....I think im going to go for the Swiftech Fan, just seems like the right piece too me :)

peace
 
mikeblas said:
If it's making a lot of noise, it is likely going out. If it's spinning slowly, it's possible that the fan speed regulation in the BIOS has been turned on.

You might want to replace the fan. Hurry up and do it before ABit goes out of business, if you want an original ABit part. Some people replace it with a passive heatsink, since the board is notorious for having that fan fail.
Unless news of the biggest enthusasist motherboard maker of all time going out of business somehow slipped by my attention, I'd have to say that comment was BS.
 
valkyre said:
Unless news of the biggest enthusasist motherboard maker of all time going out of business somehow slipped by my attention, I'd have to say that comment was BS.

They haven't gone out of business.

Yet.

Their financial troubles and scandals are well-documented. Try expanding your scope of attention with a search.
 
Lol. I still have my IC7 Max2 with P4 2.4C running folding@home. The NB fan failed on it several years ago but I just removed it and left the passive heat sink on there. Still running today. :)
 
I sold mine a while ago... I RMAed it to get the fan replaced, then sold the RMAed board on eBay and bought an Asus board that I still use now.

The IC7s were the last great boards they made, if you ask me.
 
Ah, the failing IC7-G fan. I replaced mine with a Thermalright NB-1C copper heatsink. Dropped temps by 10C or more over the stock fan, and was a whole lot quieter.
 
After 2 of the same Abit fans dying I replaced it with a Zalman passive heatsink,
model 36J or something iirc.
I used thermal epoxy which voided my warranty. That was about 6 years ago.

My board is an IC-7 plain. It's been running a 2.8c@3.1 all this time with no problems.
I have a Zalman cpu hsf which throws plenty of air towards the passive hs.
I just gave this box to my wife when I got the i7-920 going about 3 weeks ago.
I'm surprised your fan lasted this long.
 
I sold mine a while ago... I RMAed it to get the fan replaced, then sold the RMAed board on eBay and bought an Asus board that I still use now.

The IC7s were the last great boards they made, if you ask me.

The IP35's weren't too bad. Pretty much up and down that whole series there were some good boards for very reasonable prices.
 
If it's making a lot of noise, it is likely going out. If it's spinning slowly, it's possible that the fan speed regulation in the BIOS has been turned on.

You might want to replace the fan. Hurry up and do it before ABit goes out of business, if you want an original ABit part. Some people replace it with a passive heatsink, since the board is notorious for having that fan fail.

I had several (10+) of these boards over the years, and indeed on about 1/2 of them
that fan went out. As soon as a fan on one started getting noisy, I uplugged the fan.

Never had a board miss a beat with the fan not running, and I always had my
Pentium 4 3.2GHz (90nm Prescott core) overclocked up to 4.0GHz on the MAX3's

I wouldn't worry about it as long as you've got airflow in the case, just unplug it :cool:
 
I'm not so sure about that. The IX-38 QuadGT that I have now is a super stable motherboard, even with my CPU clocked at 3.6Ghz. Not to bad I think. :D

That is pretty good since the X38's weren't exactly known for being high FSB clockers.
 
Hey, I just upgraded to the IX38 Quad GT a couple of weeks ago. I was using an IP35 vanilla board and it was running fine before the upgrade. I had planned to reformat and reinstall Vista and Windows 7 beta dual boot to the X38. To my surprise both OS's installed every driver automatically on the first boot! I didn't loose one gamesave and have not had one freeze or crash with the X38 Quad GT. Overclocked my E8500 to 3.4GHz and it is a done deal. I love these Abit boards and I will miss uAbit.:cool:
 
Back
Top