• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

zzz

heh, you're gonna love it, I have mostly the same parts you listed except I got mine in a kit. good luck
 
dicth the reservoir, unless you reallly really want it.

looks good why not get the double heatercore.
 
thewhiteguy said:
Get the 1/2" to 3/8" adapter kit for the pump, you'll want that.
Click to expand...

i won't be able to squeeze the clearflex 3/8" tubing over the 1/2" inlet/outlet?
given a difference of only 1/4" I thought i'd be able to strech it over and have a tight seal.
if i can't, i'll just run down to the hardware shop and buy a 1/2" to 3/8" adapter.
 
rtierney said:
i won't be able to squeeze the clearflex 3/8" tubing over the 1/2" inlet/outlet?
given a difference of only 1/4" I thought i'd be able to strech it over and have a tight seal.
if i can't, i'll just run down to the hardware shop and buy a 1/2" to 3/8" adapter.
Click to expand...
The barbed part on the pump is more like 5/8" or more, and it's hard to do. With the soft tubing it's even harder because you can't really press it on there hard since it just collapses.

The good thing about buying Swiftech's adapter is that it comes with the short pieces of 1/2" tubing for the adapters. If you buy the adapters at the hardware store, you'll also need a little 1/2" tubing and hopefully they'll sell it by the foot.
 
rtierney said:
In that case, will I need to pick up a 1/2 to 3/8 adapter?
Click to expand...
Swiftnet sells MCP600-RK, the adapter kit, for $2.21. I don't know who else sells that or for how much, but I'd say it's worth it to avoid the trouble.
 
You can probably get Danger Den (or Swiftech for that matter, they sell the same res) to ship you a res with one of the barbs 1/2" and the other 3/8"
 
NightStalker said:
sounds like a nice system.....

where you brought it from and how much did it cost?
Click to expand...

Mostly from sidewindercomputers.com, but I bought 4 things from dangerden.com, such as the heater core, tubing, clamps, and poly res.

The total including shipping from both places was about $340.
A bit high, but I figure the parts will all stick with me for the next few systems I go through. :D
 
rtierney said:
Mostly from sidewindercomputers.com, but I bought 4 things from dangerden.com, such as the heater core, tubing, clamps, and poly res.

The total including shipping from both places was about $340.
A bit high, but I figure the parts will all stick with me for the next few systems I go through. :D
Click to expand...

gary from sidewinderscoputers is the bomb, he ships out stuff super fast and is always there to awnser the emails.
 
You must log in or register to reply here.
Back
Top